Assessment of semi-natural habitats and landscape features on Irish farmland: New insights to inform EU Common Agricultural Policy implementation

Concerns over the loss of biodiversity and ecosystem services in farmland have prompted the development of agri-environment policy measures aimed at reducing farming pressure and maintaining semi-natural habitats in farmed landscapes. However, further knowledge is needed to guarantee successful agri-environment measures implementation. The current study assessed the quantity and the quality of semi-natural habitats in farms across a gradient of farming intensities in two contrasting regions in Ireland. Policy protection seemed fundamental for semi-natural habitats preservation. Habitats not protected by agricultural policy relied on extensive farming and are in danger of disappearing if they are intensified or abandoned. Due to the lack of policy incentives for habitat quality, no correlations were found between farming intensity and share of semi-natural habitats with habitat quality. Therefore, extensive farming and retention of habitats alone may not reverse the decline of farmland quality and biodiverisity and, thus, measures incentivising the environmental quality may be more successful.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01344-6) contains supplementary material, which is available to authorized users.     

How effective are River Basin Management Plans in reaching the nutrient load reduction targets?

Riverine nutrient loads are among the major causes of eutrophication of the Baltic Sea. This study applied the Soil & Water Assessment Tool (SWAT) in three catchments flowing to the Baltic Sea, namely Vantaanjoki (Finland), Fyrisån (Sweden), and Słupia (Poland), to simulate the effectiveness of nutrient control measures included in the EU’s Water Framework Directive River Basin Management Plans (RBMPs). Moreover, we identified similar, coastal, middle-sized catchments to which conclusions from this study could be applicable. The first modelling scenario based on extrapolation of the existing trends affected the modelled nutrient loads by less than 5%. In the second scenario, measures included in RBMPs showed variable effectiveness, ranging from negligible for Słupia to 28% total P load reduction in Vantaanjoki. Adding spatially targeted measures to RBMPs (third scenario) would considerably improve their effectiveness in all three catchments for both total N and P, suggesting a need to adopt targeting more widely in the Baltic Sea countries.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01393-x) contains supplementary material, which is available to authorized users.     

疫情下医疗废物的处置现状分析

2019年新冠疫情席卷全球,在疫情环境下,医疗废物大幅增多,全国各大城市纷纷出现医疗废物处置不当的现象。本文对国内外现状分析,在认知、设施、管理和监督四个方面发现存在一定的问题,通过加强教育、加大储备、完善机制和改善监管的建议,为提升医疗废物应急处置能力提供参考。     

应用相平衡分配法建立湘江衡阳段沉积物重金属质量基准

采集湘江衡阳段29个站点的表层沉积物样品,测定沉积物中4种重金属(Cu、Pb、Zn和Cd)含量及赋存形态、以及孔隙水中重金属含量,根据相平衡分配法的基本理论,考虑参与沉积物-水相平衡分配的重金属组成,实测法计算重金属的沉积物-水相平衡分配系数(Kp),分别引用美国EPA制定保护水生生物不受重金属慢性毒性影响的基本连续浓度(CCC)和我国地表水环境质量标准(GB 3838-2002)Ⅰ类水质标准,建立两种湘江衡阳段沉积物重金属质量基准(SQC)进行对比分析,其中基于美国CCC建立的湘江衡阳段沉积物重金属质量基准与国内外研究成果相比可比性较好,4种重金属(Cu、Pb、Zn和Cd)的SQC值分别为64.62、55.57、1 360.40和2.34μg.g-1,此SQC具有保护长期生活于沉积物中的底栖生物不受重金属慢性毒性影响的意义.通过单因子评价法将湘江衡阳段沉积物中重金属总量与沉积物质量基准值(SQC)进行比较,结果表明,湘江衡阳段沉积物中Cd和Pb含量水平对底栖生物具有较大的慢性毒性影响,Cd污染不容忽视.     

福建省重点城市路面尘负荷及化学组成研究

采集并分析了福建省重点城市厦门、漳州、泉州和莆田城区具有代表性的57个地面扬尘和16个土壤样品的26种无机元素、8种水溶性离子和碳成分等组成.不同城市粒径≤100μm的路面尘负荷平均值在6.99 g.m-2与10.11 g.m-2之间,而粒径≤2.5μm的路面尘(PM2.5)负荷平均值在4.0 mg.m-2和12.5 mg.m-2之间.不同城市土壤尘和路面尘PM2.5中浓度最高的元素都是Si、Ca、Al、Fe和K,路面尘中Ca元素明显富集,而主要人为来源的重金属元素如Cu、Pb、Zn、Cr在路面尘PM2.5中的浓度显著高于土壤尘.漳州城区路面尘PM2.5中二次离子NH4+、NO3-和SO24-的含量明显高于其它地区,厦门、漳州和泉州城区路面尘PM2.5中Mg2+和Ca2+之间都存在显著的正相关关系.四城市路面尘中有机碳(OC)的含量均高于济南、石家庄以及北京地面扬尘OC的含量,元素碳(EC)的含量均低于北京地区路面扬尘EC的含量.泉州和莆田两地OC和EC的相关性较好,说明路面尘中OC和EC有相同或相似的来源.质量平衡结果显示泉州和莆田路面尘PM2.5中含量最高的是土壤尘,其次为有机物.按化学组成特征对路面尘PM2.5进行聚类解析,得到受大气沉降影响、受土壤尘影响、受大气沉降和土壤尘共同作用以及受土壤尘和建筑尘共同作用4类样品.     

制革废水和印染废水的综合毒性评估及鉴别

研究采用成组生物毒性试验(发光菌急性毒性、斑马鱼幼鱼急性毒性,斑马鱼胚胎发育毒性和小球藻急性毒性),结合理化指标,通过毒性单位、平均毒性(average toxicity,Av Tx)、毒性指数(toxic print,Tx Pr)、最敏感的测试(most sensitive test,MST)和潜在毒性效应指数(potential ecotoxic effects probe,PEEP)对不同工艺阶段印染及制革废水进行毒性削减评估.结果表明PEEP能兼顾废水排放量与毒性效应,更为客观地表征了废水综合毒性,PEEP评价结果显示制革废水和印染废水的毒性削减率分别达到36.8%和23.2%.最后,以发光菌作为受试生物,采用毒性鉴别评估(toxicity identification evaluation,TIE)技术,对印染废水进行毒性鉴别.结果表明,印染废水中主要的致毒物质为非极性有机污染,其次为可滤性化合物,然后是重金属、氧化性物质以及挥发性物质.     

宁波三江口水域原核生物群落结构分析

首次应用16S rRNA基因-Illumina Miseq高通量测序技术对甬江流域宁波三江口区域的表层水体原核生物群落进行了分析,共获得215 504条高质量序列.多样性指数分析表明,该流域的水体原核生物群落具有较高的遗传多样性和丰富度.菌群分类分析发现,β-变形菌纲(β-Proteobacterium)、放线菌门(Actinobacteria)和拟杆菌门(Bacteroidetes)是主要的优势菌群,其相对丰度占总群落的78.88%.对比不同站位的原核生物群落,发现水文环境可能是影响三江口水域原核生物群落组成和结构的重要因素之一.与以往报道对比分析表明,甬江流域分布有多种污水和粪便污染指示菌,其中余姚江污染指示菌的丰度最高,说明其受污染的风险可能较高.病原菌BLASTN分析表明,在种和亚种水平上,分别检出76和18种潜在病原菌,占序列总量的2.19%和0.40%.本研究为系统认识甬江流域原核生物群落结构及生态功能提供了重要基础数据.     

采用颜色空间表征ANAMMOX启动与冲击过程

厌氧氨氧化(ANAMMOX)是一种高效、节能的脱氮技术,但是其启动过程和稳定状态的表征目前仍缺乏一个简单易行的方法.针对这一问题,在水质分析的基础上,采用颜色空间重点监测ANAMMOX启动过程中污泥的颜色变化,并借助高通量测序技术对微生物菌群的种类和数量等进行分析.结果表明:(1)根据水质特征,整个启动过程可分为活性迟滞期、活性增强期、负荷提高期、稳定运行期.与此同时,HSV、CIELAB颜色空间的指标,整体上呈现先降低后升高的趋势,然后保持稳定.污泥颜色的变化与水质的变化以及分子生物学特征中优势菌群的变迁一致,因此,三者之间具有相关性,进而表明,采用颜色空间可对ANAMMOX启动过程进行准确表征;(2)当遇到高负荷引起的冲击时,H、S、a~*、b~*、C_(ab)~*等指标与总无机氮(TIN)容积去除速率均呈现降低的趋势,而H_(ab)出现了突升,但均能准确反映出系统的冲击特性.提出了基于颜色空间表征ANAMMOX启动各阶段的方法并建立了一套冲击过程指标体系,为颜色空间在ANAMMOX系统中的应用提供了理论基础.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

夏季太湖CDOM光学特性空间差异及其来源解析

为进一步探究夏季太湖CDOM（有色溶解性有机质）光学特性在空间分布上的差异性与其来源的关系,对其紫外-可见吸收及三维荧光光谱特性进行了分析研究,在此基础上进一步分析了CDOM吸尘系数及其荧光组分（C1、C2、C3、C4）强度和各水质参数间的相关性.结合主成分分析法探讨了CDOM的来源以及与各参数指标[ρ（DOC）除外]之间的来源关系.结果表明:CDOM吸收系数α（355）、S值（光谱斜率）变化范围分别为3.27~8.27 m-1和0.011~0.021 nm-1;太湖西部、北部及南部湖区CDOM丰度较大,S值较低,受陆源输入的影响较为明显.CDOM的三维荧光光谱揭示其中含有两种类蛋白质组分C1和C2以及类腐殖质组分C3和C4,并且以类蛋白质组分为主.此外,大部分采样点的荧光指数（FI）为1.70~2.01,自生源指数（BIX）大于1,腐殖化指数（HIX）小于0.6,r_（T/C）（荧光峰T与荧光峰C荧光强度比值）小于2,表明夏季太湖CDOM内源特性相对强烈.研究显示,除ρ（DOC）外,CDOM与其他水质参数在第一主成分上（贡献率为90.8%）均存在显著相关关系,说明各水质参数的来源存在相似性,并且受生物自生源影响更为显著.