母岩的风化剥蚀速率与土壤允许流失量的关系 --以长江三峡坝区风化花岗岩土壤为例

土壤允许流失量的确定是一个非常复杂而又必须解决的问题，它关系到水土保持措施的布设和土壤的可持续利用。然而，发育在不同母质上的土壤，其土壤的最大允许流失量差异很大，确定这一值的依据也各不相同。在岩成土壤地区，母岩风化剥蚀速率的大小直接影响土壤的发育。是确定土壤允许流失量、分析人类加速水土流失的重要依据之一。选长江三峡黄陵背斜段风化花岗岩土壤为研究对象，根据剥蚀沉积相关原理，通过恢复古地理环境及时代，计算出新生代以来本区花岗岩的平均风化剥蚀速率为16．97mm／ka．最大剥蚀速率为49．56。又根据区内太平溪流域的泥沙资料，算出了当地现代的剥蚀速率，多年平均为297．7mm／ka，最小值为31．5mm／ka，而水利部颁布的当地土壤允许流失量为200t／km^2,a，折合为76．9mm／ka，二者相差近1．5—4．5倍。基于此。提出了确定土壤允许流失量必须参考母岩风化剥蚀速率的新观点。     

北京市典型土著沉水植物对水体中硝酸盐和正磷酸盐的耐受性研究

以北京市3种典型土著沉水植物轮叶黑藻、狐尾藻和金鱼藻为研究对象,构建模拟水生生态系统,研究3种沉水植物对水体中NO₃^-和PO₄^3-的耐受性并确定其耐受范围.同时,对植物体内过氧化氢酶、丙二醛、叶绿素和蛋白质4种指标进行检测.结果表明,轮叶黑藻对NO₃^-具有较强的耐受性,耐受浓度可达8 mg·L^-1,金鱼藻和狐尾藻次之,耐受浓度为3~5 mg·L^-1;狐尾藻对PO₄^3-的耐受性最差,耐受浓度约为0.2 mg·L^-1,轮叶黑藻和金鱼藻的耐受性相当,当PO₄^3-浓度达到0.4 mg·L^-1时开始出现显著胁迫.因此,在本研究的实验条件下,当水体NO₃^-浓度<5 mg·L^-1、PO₄^3-浓度<0.2 mg·L^-1时,建议3种沉水植物同时种植;当NO₃^-浓度>5 mg·L^-1时,建议种植轮叶黑藻;当PO₄^3-浓度为0.2~0.4 mg·L^-1时,建议种植轮叶黑藻和金鱼藻.研究结果可为北京市再生水补给河湖水库的水生态修复及其沉水植物群落的构建提供一定的理论指导.     

Influence of aluminium on the restoration potential of a terrestrial vascular plant,Portulaca Oleracea L. as a biomonitoring tool of fresh water aquatic environments

In the present study, the influence of aluminium on the regeneration potential of leaf and stem-cuttings of Portulaca oleracea was studied in order to identify a terrestrial plant species as an alternate biomonitoring toolof fresh water environment. The leaves and stem cuttings of theterrestrial plant, P. oleracea grew well in the distilled water producing adventitious and lateral roots. The aluminium treated leaves and stem cuttings showed a reduction in the growthof the adventitious and lateral roots and increase in the decay of leaves and stem cuttings with increasing aluminium concentration. The tolerance index calculated for the leaves and the stem cuttings showed that the leaves were more sensitivethan stems to aluminium. Since all the parameters studied showedconcentration dependent changes, the terrestrial plant, P. oleracea can be considered a suitable biomonitoring tool of fresh water environment besides its usage in the Al toxicity testing.     

活性污泥的耐盐驯化培养

以某污水处理厂二沉池好氧污泥为接种污泥,采用逐步提高盐度和稳定盐度2种方法对活性污泥进行耐盐性驯化培养,考察驯化结果表明,前一种方法更有利于耐盐菌的培养。对比不同盐度情况下各项指标的去除效果得出:本实验污泥适宜盐度为1%。使用稳定进水盐度的方法,出水指标及各指标的去除率均低于逐步提高盐度法,且镜检结果表明大量微生物死亡。     

植物耐受和解除重金属毒性研究进展

总结了植物细胞及分子水平对重金属耐性和解除其毒性的途径.植物通过避免增加细胞内敏感位点毒物浓度来解除重金属毒性.其途径主要有:一方面通过菌根化、细胞壁吸收及根系分泌物的螯合作用减少根系吸收重金属进入细胞质;另一方面通过体内调节机制解除重金属毒性和提高耐性,主要通过一系列膜蛋白对进入细胞质内的重金属排出细胞质外、隔离于液泡中,或将重金属转变为无毒性形态挥发入大气,或通过细胞质内的植物螯合素、金属硫蛋白、有机酸、氨基酸、多胺等对重金属螯合,解除重金属毒性;同时植物还可以在重金属胁迫下产生热休克蛋白修复胁迫伤害的蛋白质.本文提供了涉及植物重金属解毒和耐性广泛的观点和证据.     

铜尾矿区9种优势植物体内重金属和氮磷含量研究

以杨山冲铜尾矿废弃地人工覆土上生长的9种优势植物为研究对象,探讨不同植物对尾矿基质中重金属和氮磷的吸收特性以及与基质理化性质之间的关联。土壤样品采集时沿基质垂直方向分为4层：A层（覆土层0~5 cm）、B层（覆土层5~20 cm）、C层（尾砂层20~25 cm）、D层（尾砂层25~40 cm）,植物样品采集时草本植物分地上和地下2部分、木本植物分根、茎和叶3部分采集。结果表明：随着9种植物生长,A层和B层基质理化性质得到明显的改善。主要表现在A层中w（总氮）、w（氨氮）、w（硝氮）、w（有效磷）和w（有机质）显著高于C、D层（P〈0.05）,B层中w（有效态Cu）、w（有效态Zn）显著低于A、C、D层（P〈0.05）。9种优势植物对Cu、Pb、Zn的吸收和积累能力具有明显差异性,其中草本植物以根系积累为主,木本植物以叶片积累为主。草本植物对尾矿基质表现出较强的适应性和耐性,其中毛叶荩草（Arthraxon prionodes）根系中Cu、Pb、Zn的富集量均最大,耐性表现最突出,是较为理想的铜尾矿基质的修复物种。另外,本研究还发现,9种植物体内氮磷质量分数也各不相同,其中木本植物叶中氮磷质量分数均大于根、茎。木本植物体内w（总氮）与w（总磷）、w（Cu）、w（Zn）相关性较好,草本植物体内w（Cu）、w（Pb）、w（Zn）之间相关性较好,表明彼此之间存在一定的促进作用。     

Influence of arsenic stress on synthesis and localization of low-molecular-weight thiols in Pteris vittata

The roles of low-molecular-weight thiols (LMWTs), such as glutathione and phytochelatins, in arsenic (As) tolerance and hyperaccumulation in Pteris vittata an As-hyperaccumulator fern remain to be better understood. This study aimed to thoroughly characterize LMWT synthesis in P. vittata to understand the roles played by LMWTs in As tolerance and hyperaccumulation. LMWT synthesis in P. vittata was induced directly by As, and not by As-mediated oxidative stress. Expression of PvECS2, one of the putative genes of γ-glutamylcysteine synthetase (γECS), increases in P. vittata shoots at 48 h after the onset of As exposure, almost corresponding to the increase in the concentrations of γ-glutamylcysteine and glutathione. Furthermore, localization of As showed similar trends to those of LMWTs in fronds at both whole-frond and cellular levels. This study thus indicates the specific contribution of LMWTs to As tolerance in P. vittata. γECS may be responsible for the As-induced enhancement of LMWT synthesis.     

Molecular characterization of conjugative plasmids in pesticide tolerant and multi-resistant bacterial isolates from contaminated alluvial soil

A total of 35 bacteria from contaminated soil (cultivated fields) near pesticide industry from Chinhat, Lucknow, (India) were isolated and tested for their tolerance/resistance to pesticides, heavy metals and antibiotics. Bacterial isolates were identified by 16S rDNA sequencing. Gas Chromatography analysis of the soil samples revealed the presence of lindane at a concentration of 547 ng g⁻¹ and α-endosulfan and β-endosulfan of 422 ng g⁻¹ and 421 ng g⁻¹ respectively. Atomic Absorption Spectrophotometry analysis of the test sample was done and Cr, Zn, Ni, Fe, Cu and Cd were detected at concentrations of 36.2, 42.5, 43.2, 241, 13.3 and 11.20 mg kg⁻¹ respectively. Minimum inhibitory concentrations of all the isolates were determined for pesticides and heavy metals. All the multi-resistant/tolerant bacterial isolates were also tested for the presence of incompatibility (Inc) group IncP, IncN, IncW, IncQ plasmids and for rolling circle plasmids of the pMV158-family by PCR. Total community DNA was extracted from pesticide contaminated soil. PCR amplification of the bacterial isolates and soil DNA revealed the presence of IncP-specific sequences (trfA2 and oriT) which was confirmed by dot blot hybridization with RP4-derived DIG-labelled probes. Plasmids belonging to IncN, IncW and IncQ group were neither detected in the bacterial isolates nor in total soil DNA. The presence of conjugative or mobilizable IncP plasmids in the isolates indicate that these bacteria have gene transfer capacity with implications for dissemination of heavy metal and antibiotic resistance genes. We propose that IncP plasmids are mainly responsible for the spread of multi-resistant bacteria in the contaminated soils.     

植物镉耐性/富集基因的筛选方法

植物耐受/富集镉（Cd）是一个复杂的过程,涉及转运蛋白家族、螯合蛋白家族、抗氧化系统等多个方面的参与。文章综述了植物Cd耐性/富集基因的筛选方法,包括抗性表达文库、Cd抗性突变体的图位克隆、基因差异表达、电子克隆。筛选Cd抗性植物cDNA酵母表达文库可鉴定与金属束缚、隔离及外排相关的膜转运蛋白;筛选重金属敏感拟南芥突变体和图位克隆突变基因可鉴定与谷胱甘肽和植物螯合肽合成相关的酶;第二代测序技术、基因差异表达分析则是鉴定Cd响应基因以及揭示金属型植物与非耐性植物表型差异分子基础的有效方法;电子克隆也被应用在模式植物中鉴定重金属转运蛋白家族的编码基因。在此基础上,简述了Cd耐性/富集基因在改良植物Cd耐性或富集上的应用。     

电厂低负荷下V-W/TiO2基NH3-SCR催化剂的低温改性

在不改变工业催化剂制备工艺的基础上,通过改性提高工业V-W/TiO2催化剂的低温活性。实验采用浸渍法,通过添加磷酸以及氧化铈来改性工业V-W/TiO2催化剂,探讨了新型低温SCR催化剂的脱硝活性。并通过比表面积测试（BET）,X射线衍射实验（XRD）,吡啶红外实验,程序升温还原（H2-TPR）等技术对催化剂理化性能进行表征。研究结果表明,1%磷酸添加量使催化剂表面的B酸以及弱酸含量大量增加,使催化剂向低温端降低了30 ℃;同时,在添加1%磷酸的基础上,添加不同含量氧化铈,提高催化剂的氧化还原性,发现添加8%氧化铈,使催化剂氧化还原性能显著增强,转化温度向低温再次降低了40 ℃。通过添加磷酸和氧化铈,使V-W/TiO2催化剂80%转化温度从280 ℃降至220 ℃,同时具备了高抗硫抗水性。