UASB-BIOFOR滤池组合工艺处理柠檬酸废水的中试研究

采用UASB-BIOFOR滤池组合工艺处理柠檬酸废水,对其中的操作步骤及注意事项进行了详细介绍.实验结果表明,该组合工艺对柠檬酸废水处理效果良好,系统出水能够达到GB 8978-1996《污水综合排放标准》中的一级标准.     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

英语阅读方法和能力的研究与指导

本文试从英语阅读的心理与习惯，对阅读中所遇到的新、生词汇的处理及阅读方法与技巧几个方面来论述，加强学生英语阅读能力及提高学生的综合素质。     

我国中水回用现状及对策

我国水资源短缺问题日益严重，从长远发展来看，中水回用作为一项保护环境、节约资源的措施，将有力地促进城市的可持续发展和加速生态城市的建设。中水回用是解决我国水资源危机的有效途径之一。     

再论次生石英岩型非金属矿床

次生石英岩型非金属矿床明显受不同级别的火山构造控制,是中—酸性火山岩区一套很有特色的矿床组合;热源、水源、地层产状有机组合生成的环流热液是成矿的前提之一;成矿流体以重碳酸盐型、硫酸盐型为主,属中—低盐度热液;温度、pH值、fo_2等物理化学条件是矿床及矿种类刑的重要控制因素。本文在《次生石英岩容矿型非金属矿床系列的矿种、组合及其成矿作用特征》(1986)一文基础上,进一步总结这类矿床的成矿机理和地质地球化学模式。     

朝阳市环保产业现状与建议

对朝阳市环保产业现状和存在问题进行分析 ,结合朝阳市环保产业发展的优势条件 ,并提出环保产业发展的建议。     

高等院校教师有效激励机制的探讨

高等院校管理者必须思考如何更加有效的激励教师工作的积极性。高等院校教师的有效激励机制包括教师工作激励机制、教师成就激励机制和优秀教师的价值激励机制。三者有机结合，才能更好的促进教师的工作积极性、主动性、创造性，实现高等院校教师的自我价值。     

重庆近11年大气混合层厚度研究

根据新闻颁国家标准ＧＢ／Ｔ１３２０１－９１的规定，计算了重庆地区近１１年大气混合厚度，分析结果表明，重庆地区大气混合层厚度有明显日变化和季节变化，大气稳定度是混合层厚度的主要决定因子。     

Atmospheric particulate pollution of Lanzhou using magnetic measurements

１　ＩｎｔｒｏｄｕｃｔｉｏｎＡｔｍｏｓｐｈｅｒｉｃｐａｒｔｉｃｕｌａｔｅｉｓｏｎｅｏｆｔｈｅｍａｉｎａｔｍｏｓｐｈｅｒｉｃｐｏｌｌｕｔａｎｔｓｉｎＣｈｉｎａ．Ｉｔｍａｙｂｅｈａｒｍｆｕｌｉｔｓｅｌｆａｎｄｃａｎａｃｔａｓａｃａｒｒｉｅｒｏｆｔｏｘｉｃｍａｔｔｅｒｓｗｈｉｃｈｍａｙｈａｖｅｒｅｍａｒｋａｂｌｅｉｍｐａｃｔｓｏｎｈｕｍａｎｈｅａｌｔｈａｎｄａｔｍｏｓｐｈｅｒｉｃｅｎｖｉｒｏｎｍｅｎｔｑｕａｌｉｔｙ．Ｃｏｍｂｕｓｔｉｏｎｏｆｃｏａｌ，ｗｈｉｃｈｓｔｉｌｌｓｅｒｖｅｓａｓｐｒｉｍａｒｙｅ…     

大直径TA2卷焊坯制备工艺

此文介绍尺寸为φ1547×L900×δ30的大直径TA2卷焊坯的制备工艺。主要包括卷焊坯设计、展开下料的计算、卷圆工艺、焊接工艺等,可供同类材质圆筒件卷圆时参考。