Seasonal Fluctuation in Heavy Metal Pollution in Iran´s Siahroud River - A Preliminary Study (7 pp)

Background The management of its available water resources has become a key issue for Iran. During the last few decades, the water quality of Siahroud River in the coastal plain of the Caspian Sea in Gilan Province in Northern Iran has significantly degraded. The scarcity of water has been compounded by rapid population growth and increasing pollution from fertilizers, pesticides, and municipal and industrial wastes. One of the sources of this degradation is the movement of heavy metals from the river's watershed into the various water systems supported by the river, including the water system for Rasht City. Methods To study the magnitude of heavy metal pollution in the Siahroud River, seven heavy metals including Zn, Cu, Pb, Cd, Mn, Fe, and Ni were measured in duplicate from replicated water samples collected over five consecutive seasons and analyzed by Atomic Absorption Spectrometry. In situ measurements of pH were taken with the samples and total organic carbon (TOC) was analyzed by IR gas measurement. Results The results demonstrated that four of the seven heavy metals including Pb, Fe, Cd, and Mn exceeded permissible safe levels as established by the United States Environmental Protection Agency. Multivariate factor analysis suggested that industrial land-use was the main contributing factor for the high levels of Fe and Mn in the Siahroud River, whereas, Cd was principly from agricultural activities in the watershed. The data also suggested that pH and TOC had an important role in the behaviour of Pb and Mn, and that the elevated levels of these two heavy metals in Siahroud River was the consequence of other anthropogenic sources. Only negligible levels of Zn, Cu and Ni were detected. Finally, all the sampling stations were subjected to cluster analysis. The results indicated that three different zones could be distinguished according to the levels of pollution. In addition, it was shown that the urban areas did not have a significant impact on the heavy metal pollution in the river. This observation stems from the fact that the data from the sampling stations before and after Rasht City were not significantly different. Recommendation . Preventive measures need to be undertaken in the land-use systems and watersheds of the Siahroud River to reduce the pollution levels of Pb, Cd, Mn and Fe.     

活性炭吸附室内空气中挥发性有机化合物

活性炭吸附室内空气中挥发性有机化合物的１０％穿透时间与气相浓度及挥发性有机化合物的种类有关,通过对苯、甲苯和丙酮的实验研究,得出了由高浓度估算室内低浓度时炭床１０％穿透时间的经验公式ｔｂ,１＝ｔｂ,ｈ（Ｃ０,１／Ｃ０,ｈ）＾ａ,其中ａ值是与炭床性能及挥发性有机化合物种类有关的参数,可通过实验确定。     

Trends of air pollution in the Fichtelgebirge Mountains, Bavaria

We analyzed 13 years of hourly measurements of SO₂, NO_x, and O₃, at forest ecosystem research sites in SE Germany. A quasi-continuous data record was obtained by combining data sets from two locations. Before interpreting trends in the combined data set, we analyzed if the change of location introduced a systematic bias. We employed autocorrelation functions, Hurst statistics, complexity analysis, and recurrence quantification and found that the partial data sets exhibited no indication of the presence of any bias. For SO₂, we also compared the data from the forest sites with data obtained in nearby cities and also found no indications for any systematic effects. Applying nonparametric trend statistics we found a significant decrease of the SO₂. Most of the observed decrease is due to the reductions of SO₂ emissions in eastern Germany, but reductions in western Germany and the Czech Republic also played important roles. For O₃, we observed a significant increase, the causes of which are unclear from our data alone. No trend was identified for NO_x.     

太湖梅梁湾富营养化相关问题探讨

太湖水体富营养化问题已严重威胁着太湖流域社会经济发展,特别是梅梁湾湖区尤为严重。以实测资料为基础,分析了太湖富营养化的环境影响因子,得出以下结论：磷为梅梁湾湖区主要的限制性因子;光照、水温为该区富营养化重要影响因素,但不是主要的限制性因子。CODMa与富营养化关系密切,但需进一步探讨其影响实质。     

爆炸荷载作用下钢筋混凝土防爆墙动力响应研究

为了研究钢筋混凝土防爆墙的抗爆能力,采用有限元分析方法对不同纵向配筋率、不同高跨比、不同厚度的墙体在爆炸动态荷载作用下的动力响应进行研究,对各种不同设置的钢筋混凝土防爆墙的抗爆性能进行评估。结果表明:减小高跨比对提高钢筋混凝土防爆墙的抗爆能力最为重要,提高纵向配筋率,增加厚度都能增加防爆墙的抗爆能力。     

Risk assessment method of polyethylene dust explosion based on explosion parameters

The explosion characteristic parameters of polyethylene dust were systematically investigated. The variations in the maximum explosion pressure (P_max), explosion index (K_st), minimum ignition energy (MIE), minimum ignition temperature (MIT), and minimum explosion concentration (MEC) of dust samples with different particle sizes were obtained. Using experimental data, a two-dimensional matrix analysis method was applied to classify the dust explosion severity based on P_max and K_st. Then, a three-dimensional matrix was used to categorize the dust explosion sensitivity based on three factors: MIE, MIT, and MEC. Finally, a two-dimensional matrix model of dust explosion risk assessment was established considering the severity and sensitivity. The model was used to evaluate the explosion risk of polyethylene dust samples with different particle sizes. It was found that the risk level of dust explosion increased with decreasing particle size, which was consistent with the actual results. The risk assessment method can provide a scientific basis for dust explosion prevention in the production of polyethylene.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

The effect of barriers on reducing thermal heat fluxes from a hydrocarbon pool fire

The radiant heat flux from a pool fire is frequently calculated using the solid flame model, where the flame envelope is approximated as a stationary cylinder whose surface emits thermal radiation at a constant rate. Radiant heat flux calculations using the solid flame model assume the target to be at a given elevation, typically at ground level, and to have an unobstructed view of the fire. The presence of obstacles (e.g., walls, buildings, etc.) or terrain features that would create shaded areas and provide shielding of a target from the fire is typically neglected in these calculations: this is a conservative approach, but it is not accurate. This paper presents a methodology to utilize the solid flame model to calculate the heat flux to a target while taking into account the presence of an obstruction between the target and the fire. The shielded solid flame method can quantitatively account for the presence of obstacles as a passive mitigation measure and allows project developers or designers to optimize their facility layout to meet safety requirements. The methodology presented in this paper uses the same correlations found in currently used solid flame models (e.g., LNGFIRE3), therefore, it remains consistent with current regulatory requirements for LNG facilities in the U.S.     

基于熵权的隧道塌方风险非线性模糊评判方法

隧道塌方风险分析是隧道设计和安全施工的重要环节。首先选取隧道塌方风险评价指标并建立评价指标风险分级标准,在深入分析新奥法隧道施工风险影响因素的基础上,根据隧道塌方风险影响因素具有模糊不确定性和层次性的特点建立隧道塌方风险的模糊综合评判模型。其次,通过研究各因素评价指标取值方法及隶属度函数选取原则,建立评价指标隶属度确定方法。然后针对不同专家工程经验及认知的不同,引入群组决策的思想,基于信息熵理论建立评价指标的权重计算方法。考虑到影响因素对隧道塌方风险影响具有非线性特征,引入非线性模糊运算方法,从而最终建立基于熵权的隧道塌方风险非线性模糊评判方法。最后通过工程实例分析表明了方法的可行性与合理性。     

User involvement in the ergonomic development of a medical instrument: a longitudinal case study

In this study the focus is on the continuous ergonomic-focused development of a medical instrument that is capable of performing blood group serological tests. Primarily, a medical device must be clinically effective and safe. At the same time it must also meet the needs of its users. This calls for consideration of numerous ergonomic aspects. The development process of the product line in question was supported by a longitudinal series of carefully designed focus groups. Altogether, the 23 focus groups conducted included 245 participants from 72 laboratories. The aim of the empirical research was to collect users’ experiences, ideas and needs as inputs for the following phase of the product development process. During the mentioned focus group analyses, around 100 development proposals were conceived. Besides presenting more of the mentioned development proposals, the focus group analysis was shown as a proper methodology to involve end-users in the development and implementation of new technology or devices.