Experimental Test of Postfire Management in Pine Forests: Impact of Salvage Logging versus Partial Cutting and Nonintervention on Bird–Species Assemblages

Abstract: There is an intense debate about the effects of postfire salvage logging versus nonintervention policies on regeneration of forest communities, but scant information from experimental studies is available. We manipulated a burned forest area on a Mediterranean mountain to experimentally analyze the effect of salvage logging on bird–species abundance, diversity, and assemblage composition. We used a randomized block design with three plots of approximately 25 ha each, established along an elevational gradient in a recently burned area in Sierra Nevada Natural and National Park (southeastern Spain). Three replicates of three treatments differing in postfire burned wood management were established per plot: salvage logging, nonintervention, and an intermediate degree of intervention (felling and lopping most of the trees but leaving all the biomass). Starting 1 year after the fire, we used point sampling to monitor bird abundance in each treatment for 2 consecutive years during the breeding and winter seasons (720 censuses total). Postfire burned‐wood management altered species assemblages. Salvage logged areas had species typical of open‐ and early‐successional habitats. Bird species that inhabit forests were still present in the unsalvaged treatments even though trees were burned, but were almost absent in salvage‐logged areas. Indeed, the main dispersers of mid‐ and late‐successional shrubs and trees, such as thrushes (Turdus spp.) and the European Jay (Garrulus glandarius) were almost restricted to unsalvaged treatments. Salvage logging might thus hamper the natural regeneration of the forest through its impact on assemblages of bird species. Moreover, salvage logging reduced species abundance by 50% and richness by 40%, approximately. The highest diversity at the landscape level (gamma diversity) resulted from a combination of all treatments. Salvage logging may be positive for bird conservation if combined in a mosaic with other, less‐aggressive postfire management, but stand‐wide management with harvest operations has undesirable conservation effects.     

Key factors that influence households’ tree planting behaviour

Despite a decrease in indigenous forests and a growing demand for tree products in developing countries, tree planting activities are not considerably expanding in Tanzania. In this paper, we analyse factors that influence households’ tree planting behaviour, as well as the number of trees planted. Coast and Morogoro regions in the east of Tanzania were selected as the case, and data was gathered from 202 households in 11 villages in these regions where tree planting programmes have been or still are active. A Heckman model is used to analyse the factors that drive tree planting behaviour. Results indicate that households get wood energy from forest reserves (57%), in addition to their own planted trees (9.1%). Emperical findings show that the most important factors have significantly positive effects on households’ tree planting behaviour, as well as the extent to which it was implemented. These factors include households’ land sizes, households’ awareness of tree planting programmes, tree planting for wood energy, and the age of the head of the household. The right/freedom to harvest and transport tree products, households’ attitudes towards tree planting, and family size have significantly negative effects on households’ tree planting behaviour. This paper is perhaps the first comprehensive study to analyse the factors that influence households’ tree planting behaviour in Tanzania, and it uncovers results that are useful, even for other developing countries with similar conditions.     

Improved source assessment of Si, Al and related mineral components to PM10 based on a daily sampling procedure

Samples obtained from an industrialized valley in the East Alpine region were collected daily for a half year and analyzed using X-ray fluorescence to examine the elements Si,Al,Fe,Ca,Mg,Na,K,Zn,P,S and Cl.Some factors affecting the changes of these elements were considered,including time,elemental correlations,weekday,weekend and seasonal changes.Diagnostic analysis provided an insight into a decoupling behavior that occursin siliceous and carbonates minerals.A decrease in Si and Al and an increase in carbonates,Na,K,Zn and P were observed during the cold season.However,a consistently high correlation of Si and Al was observed in all seasons.It was established that such high levels originated from street surface abrasion.The increase in variability and absolute levels of carbonates during the cold season was demonstrated by adding carbonates to the street surface as gritting material to increase the grip on snowy surfaces.A marked increase in Na and Cl was observed in winter which may have been caused by thaw salt that is widely used in winter in Austria.This was associated with a significant increase in K,Zn,and P in the cold season that was the result of domestic space heating with wood.PM10 levels in December were 12 μg/m3 and were higher than levels detected in July.It was established that such high levels originated from mineral oxides,wood smoke,and inorganic ionic material(s).     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

Indoor and outdoor air pollution and lung cancer in New Hampshire and Vermont

Indoor and outdoor air pollution is known to contribute to increased lung cancer incidence. This study is the first to address the contribution of home heating fuel and geographical course particulate matter (PM₁₀) concentrations to lung cancer rates in New Hampshire, USA. First, Pearson correlation analysis and geographically weighted regression were used to investigate spatial relationships between outdoor PM₁₀ and lung cancer rates. While the aforementioned analyses did not indicate a significant contribution of PM₁₀ to lung cancer in the state, there was a trend towards a significant association in the northern and southwestern regions of the state. Second, case-control data were used to estimate the contributions of indoor pollution and secondhand smoke to the risk of lung cancer with adjustment for confounders. Increased risk was found among those who used wood or coal to heat their homes for more than 10 winters before the age of 18, with a significant increase in risk per winter. Resulting data suggest that further investigation of the relationship between heating-related air pollution levels and lung cancer risk is needed.     

Soil pollution in day-care centers and playgrounds in Norway: national action plan for mapping and remediation

Systematic geochemical mapping based on sampling and analysis of surface soils (0–2 cm) has been carried out in several Norwegian cities. The soils in the oldest parts of the cities are contaminated with metals (especially Pb) and polycyclic aromatic hydrocarbons (PAH). Due to the fact that children are often in contact with surface soil, it was realized that special focus had to be directed towards soils in day-care centers and playgrounds. The first mapping and remedy program was initiated in Trondheim in 1996. Here, the importance of copper–chromium–arsenic (CCA)-pressure-impregnated wood in playing equipment as a pollution source for soils was documented, and a process was started with the aim to ban this product. Soils from day-care centers in the inner city of Bergen were polluted to a degree that required remediation in 45% out of 87 centers, mainly due to high concentrations of Pb and benzo(a)pyrene. In Oslo, 38% of 700 day-care centers needed remediation due to soil pollution by Pb, BaP, Cd, Hg, Ni and PCB. Removal of CCA-impregnated wood was necessary in more than half of the day-care centers The Norwegian parliament has decided to investigate all outdoor playing areas in day-care centers, playgrounds and schoolyards in Norway, starting in 2007 with day-care centers in the ten largest cities and five most important industrial areas. The Norwegian Institute of Public Health has developed quality criteria for soils in day-care centers and playgrounds for As, Cd, Cr⁶⁺, Hg, Ni, Pb, zinc, PAH_sum16, benzo(a)pyrene, and PCB_sum7. The Geological Survey of Norway has developed guidance for mapping of soil pollution (sampling, chemical analysis and reporting) in day-care centers. Especially the sampling strategy has been developed in the period 1996–2007, and the preferred sampling strategy is to collect at least 10 samples of surface soil (0–2 cm) from (1) “original soil” on the site, (2) artificial man-made “hills”, and (3) soils used for growing vegetables. A total number of 2,000 day-care-centres are to be investigated, and necessary remediation should be completed before the end of 2010.     

Phenogenetic Analysis of Pygmy Wood Mouse (Apodemus uralensis Pall.) Populations in the Zone of the Eastern Ural Radioactive Trace (EURT)

Monitoring of A. uralensis populations in Kamenskii raion, Sverdlovsk oblast, in 1992–2002 and in Kaslinskii raion, Chelyabinsk oblast, in 2000–2001 revealed an increase in the proportion and diversity of minor morphogenetic aberrations and abnormalities in the structure of the cranium along the axis of the Eastern Ural Radioactive Trace (EURT). The samples from the southern and northern parts of the EURT (contaminated with ⁹⁰Sr to 500 and 4 Ci/km², respectively) were characterized by directed deviations from the control with respect to the frequencies of phenes of nonmetric cranial traits and an increase in the level of their fluctuating asymmetry in young females, which is indicative of epigenetic rearrangements in populations living in a radioactive environment.     

改性木屑吸附剂对印染废水的脱色性能研究

本文介绍了以廉价易得的杨树木屑为原料，经环氧氯丙烷交联，制备的一种新的生物吸附剂，研究各种反应因素（氢氧化钠浓度、环氧氯丙烷用量、反应温度、木屑粒径等）对反应过程和吸附剂性能的影响，检验了其对品红及孔雀石绿在不同条件下的吸附性能，并探讨了它的吸附动力学曲线和再生性能。     

Manufacture of strand board made from construction scrap wood

The objective of this research was to evaluate the physical and mechanical properties of strand board made from construction scrap wood. The strand board was manufactured using Sugi (Cryptomeria japonica D. Don) and Douglas-fir (Pseudotsuga japonica) strands selected from construction scrap wood. The strands were oriented, and three-layer (face/core/face) strand board of three types was produced: one in which the strands of the face layer were oriented at a right angle to those of the core layer (R board), another in which the strands of the face layer were oriented parallel to those of the core layer (P board), and a third in which the strands of both layers were oriented at random (Ra board). The physical and mechanical properties of the boards were evaluated based on Japanese Industrial Standard (JIS). The main results obtained are as follows: the bending strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard of JIS A 5908. The bending strength of the strand board was affected by board density, strand orientation and resin content, and became larger with increased density as well as resin content. That of the parallel specimen of P board was the largest among the specimen-orientations and types. The internal bond strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard and type 24-10 particleboard of JIS A 5908. The internal bond strength was markedly affected by the resin content of the core layer, and became larger with increased density. The thickness swelling of the strand board decreased with increased resin content, and become larger with increased density.     

Performance,combustion and emission characteristics of a single-cylinder,four-stroke,direct injection diesel engine operated on a dual-fuel mode using Honge oil methyl ester and producer gas derived from biomass feedstock of different origin

Renewable and alternative fuels have numerous advantages compared with fossil fuels, as they are renewable and biodegradable, and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues. In this context, present work was carried out to investigate the feasibility of alternative and renewable fuels derived from biomass feedstock of different origin for engine applications. The present study was also extended to study the effect of producer gas composition derived from different biomass feedstock on the performance, combustion and emission characteristics of a single-cylinder, four-stroke, direct injection stationary diesel engine operated on a dual-fuel mode using Honge oil methyl ester (HOME) and producer gas induction. The performance of the engine was evaluated with a constant injection timing of 27° before top dead centre, an injection pressure of 205 bar for the diesel–producer gas combination and 230 bar for the HOME–producer gas combination and a compression ratio of 17.5. The results showed that the performance of the dual-fuel engine varies with the composition of the producer gas and depends on the type of biomass feedstock used in the gasifier. Experimental investigations on the dual-fuel engine showed that brake thermal efficiency values for the engine operated using HOME–producer gas derived from babul, neem and honge woods were found to be 17.2, 14.3 and 11.56% respectively, compared to 23.8% for diesel–producer gas operation at 80% load. However, the results showed better engine performance with lower exhaust emission levels for the operation of HOME–producer gas derived from the ordinary or babul wood compared with the operation of that derived from the neem and Honge woods. In view of this, present study reveals that use of alternative and renewable fuels for dual fuel engine can be considered as an immediate solution for the development of rural areas and emergency use in the event of severe diesel fuel shortage.