基于UD-PLS对牛粪堆制Cu和Zn钝化预测模型的研究

选取钝化材料木醋液和影响堆肥质量的关键因素:含水量和C/N,每个因素安排6个水平,利用均匀设计进行多因素多水平试验,对试验结果进行偏最小二乘回归分析,建立对重金属的钝化预测模型.结果表明:木醋液添加比例为0.50%、含水量为40%和C/N为40时,Cu和Zn的钝化效果均达到最大值,分别为13.5%和30.2%;其中重金属Cu的钝化预测模型为 ,其中交叉有效性为 ,模型达到精度要求;重金属Zn的钝化预测模型为 ,其中交叉有效性为 ,模型达到精度要求.针对多因素多水平的复杂堆肥系统中,将均匀设计与偏最小二乘法有机耦合,有效地解决了试验次数多、因素间多重相关性的问题,从而使模型精度和实用性都得到提高.     

常用木质家具材料在不同氧浓度下的热分析

利用热重差热分析仪对几种常用木质家具材料在不同氧气浓度下的热分解和燃烧行为进行了研究。通过对TGA曲线,DTG曲线以及DTA曲线的分析,得出了氧气浓度对各种样品热分析结果的影响。求出了各样品的动力学参数,提出了相应的燃烧动力学反应模型。     

Biomolecules preserved in ca. 168 million year old fossil conifer wood

Biomarkers are widely known to occur in the fossil record, but the unaltered biomolecules are rarely reported from sediments older than Paleogene. Polar terpenoids, the natural products most resistant to degradation processes, were reported mainly from the Tertiary conifers, and the oldest known are Cretaceous in age. In this paper, we report the occurrence of relatively high concentrations of ferruginol derivatives and other polar diterpenoids, as well as their diagenetic products, in a conifer wood Protopodocarpoxylon from the Middle Jurassic of Poland. Thus, the natural product terpenoids reported in this paper are definitely the oldest polar biomolecules detected in geological samples. The extracted phenolic abietanes like ferruginol and its derivatives (6,7-dehydroferruginol, sugiol, 11,14-dioxopisiferic acid) are produced only by distinct conifer families (Cupressaceae s. l., Podocarpaceae and Araucariaceae), to which Protopodocarpoxylon could belong based on anatomical characteristics. Therefore, the natural product terpenoids are of great advantage in systematics of fossil plant remains older than Paleogene and lacking suitable anatomical preservation.     

汞的树木年轮化学研究进展

由于可以有效揭示重金属污染的时间变化序列,近年来,树木年轮被广泛应用于环境重金属污染的历史追溯。年轮化学技术也被应用于示踪某地区的汞污染历史,本文系统介绍了利用树木年轮化学对汞污染积累历史进行追溯研究的相关研究成果,包括样品采集与处理、含量测定及数据分析,并对木质汞来源进行了讨论,最后对汞年轮化学研究的未来发展进行了展望。     

木材在线性增长热流下着火的复合判据研究

为探索木材在热流变化时的着火特点并提出着火判据,通过试验研究了木材在线性增长热流条件下的自发着火性能,测定了泡桐、椿木、榆木和刺槐4种木材的点燃时间、木材表面的入射热流以及试样内部的温度.结果表明.当热流增长率大于等于0.199kw/(m~2·s)时,试验的所有木材均可以被点燃,点燃这些木材的临界热流增长率介于0.065～0.103 kw/(m~2·s).建立了木材着火的计算模型,计算得出木材自发着火时的表面温度约为500℃.根据试验和计算的结果提出了-结合表面温度和临界热流增长率的木材自发着火复合判据.     

Ecological Linkages Between Headwaters and Downstream Ecosystems: Transport of Organic Matter,Invertebrates, and Wood Down Headwater Channels1

Abstract: Headwater streams make up a large proportion of the total length and watershed area of fluvial networks, and are partially characterized by the large volume of organic matter (large wood, detritus, and dissolved organic matter) and invertebrate inputs from the riparian forest, relative to stream size. Much of those inputs are exported to downstream reaches through time where they potentially subsidize river communities. The relative rates, timing, and conversion processes that carry inputs from small streams to downstream reaches are reasonably well quantified. For example, larger particles are converted to smaller particles, which are more easily exported. Also, dissolved organic matter and surface biofilms are converted to larger particles which can be more easily intercepted by consumers. However, the quality of these materials as it affects biological activity downstream is not well known, nor is the extent to which timing permits biological use of those particles. These ecological unknowns need to be resolved. Further, land uses may disrupt and diminish material transport to downstream reaches by removing sources (e.g., forest harvest), by affecting transport and decomposition processes (e.g., flow regulation, irrigation, changes in biotic communities), and by altering mechanisms of storage within headwaters (e.g., channelization). We present conceptual models of energy and nutrient fluxes that outline small stream processes and pathways important to downstream communities, and we identify informational gaps that, if filled, could significantly advance the understanding of linkages between headwater streams and larger rivers. The models, based on empirical evidence and best professional judgment, suggest that navigable waters are significantly influenced by headwater streams through hydrological and ecological connectivities, and land use can dramatically influence these natural connectivities, impacting downstream riverine ecosystems.     

生物—物理化学法处理制浆黑液的试验研究

采用酸中和—厌氧—好氧—生物活性炭或化学混凝综合法处理制浆黑液,探讨了酸中和处理的影响因素及厌氧处理对后段好氧处理的影响.结果表明:两种综合处理工艺对黑液中木质素及COD_(Cr)的去除有显著效果;厌氧处理比好氧处理对木质素的降解更为有利.     

Total recycling of CCA treated wood waste by low-temperature pyrolysis

A system to turn a potentially harmful stream of solid waste into a set of substreams with either commercial value or highly concentrated residual streams is presented. The waste which is considered is metal impregnated (in particular Chromated Copper Arsenate (CCA) treated) wood waste and timber, such as telephone poles, railway sleepers, timber from landscape and cooling towers, wooden silos, hop-poles, cable drums and wooden playground equipment. These waste streams sum up to several 100,000 tons of material per year currently to be dumped in every major country of the European Community (EC). Technologies need to be developed to reduce this CCA treated wood waste, such that all of the metals are contained in a marketable product stream, and the pyrolysis gases and/or pyrolysis liquid are used to their maximum potential with respect to energy recuperation. Pyrolysing the CCA treated wood waste may be a good solution to the growing disposal problem since low temperatures and no oxidising agents are used, which result in lower loss of metals compared to combustion. An experimental labscale pyrolysis system has been developed to study the influence of the pyrolysis temperature and the duration of the pyrolysis process on the release of metals and the mass reduction. The macrodistribution and microdistribution of the metals in the solid pyrolysis residue is studied using Inductively Coupled Plasma Mass Spectrometry (ICP–MS) and Scanning Electron Microscopy coupled with Energy Dispersive X-ray Analysis (SEM–EDXA). Furthermore, a complete mass balance is calculated over the pyrolysis system. Based on these results a semi-industrial pyrolysis system (pilot plant scale) has been developed consisting of three stages: grinding, packed bed pyrolysis and metal separation. Special types of equipment have been developed to carry out the three stages. A new grinding system has been developed, based on a crushing mechanism rather than a cutting mechanism. The crushed wood is introduced by means of a screw feeding system into a reaction column. In this pyrolysis reactor the wood is heated by subjecting it to a flow of hot gases. This causes an adiabatic pyrolysis, which results in volatilisation of the volatile compounds whereas the mineral compounds (containing the metals) remain entrapped in a coal-type residue which is very rich in carbon. The condensable compounds in the pyrolysis gas condense while leaving the reaction zone due to the inverse temperature gradient. The pyrolysis gas leaving the reactor is used as fuel for the hot gas generator. The charcoal which is extracted at the bottom of the reactor, is cooled, compressed, removed and stored, ready to feed the subsequent stage. A specially developed grinder is used to remove the metal particles from the charcoal and the separation between metal and charcoal particles is accomplished in a pneumatic centrifuge as a result of the difference in density. Using this system the ultimate waste is less than 3% of the initial wood mass. Results obtained with a semi-industrial scale prototype confirm the effectiveness of the process.     

A lidar-based assessment of riparian shade and large wood potential in the Skagit River watershed,WA

Wild salmon stocks in the Pacific Northwest are imperiled by a variety of declining habitat factors, including riparian shade and in-channel large wood. In this paper, a relatively simple lidar model of the riparian canopy was used along anadromous streams in the Skagit River watershed in western Washington State, United States, to delineate where riparian trees were most lacking, and where restoration efforts would have the greatest benefit in terms of shade and large wood recruitment potential. Within a 45-m riparian buffer, 61% of riparian zones were currently incapable of delivering large wood to the stream. Current potential for large wood recruitment is greatest adjacent to stream edges and falls off rapidly with distance from the channel. Approximately 99% of large wood recruitment potential lies within 45 m of the channel edge, and 50% of the wood potential is within 9 m. A hypothetical canopy model in which all trees mature to a 100-year height would provide 18% more shade distributed over the entire watershed, and 90% more shade in the tributaries. Most of the potential gains in improved shade and large wood contributions are in agricultural areas, as opposed to forestry or urban land uses. The shade and large wood models were constructed from widely available geographic information system tools and are readily transferable to other watersheds with similar characteristics. Model outputs are intended for use in planning restoration projects, as an input to stream temperature models, and to inform policy on restoration priorities and regulatory buffer widths.     

木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂对二元重金属离子溶液中Pb^2＋的吸附

采用自制木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂R1、R2、R3对二元金属离子Cu2＋/Pb2＋和Zn2＋/Pb2＋溶液中的吸附性能进行了较系统考察。Pb2＋离子溶液中存在竞争离子Cu2＋、Zn2＋时,随竞争离子浓度增加,3种吸附树脂R1、R2、R3对Pb2＋的吸附量明显下降,而竞争离子吸附量显著增加。二元溶液中各金属离子浓度相同时,3种树脂对竞争离子Cu2＋、Zn2＋的吸附量大于对Pb2＋的吸附量;各溶液中分别加入NaCl及NaNO3、尿素后,对Pb2＋离子的吸附量下降迅速。随吸附树脂用量增加,竞争离子Cu2＋、Zn2＋的吸附量逐渐减小,Pb2＋的吸附量在吸附树脂用量0.10 g/L（Zn2＋/Pb2＋溶液）或0.15 g/L（Cu2＋/Pb2＋溶液）时出现最大值。溶液pH值对树脂吸附性能有显著影响。3.0