海洋环境腐蚀模拟试验装置的优化设计与研制

本文介绍了基于GB/T 19746—2005/ISO 11130:1999等材料腐蚀性能试验标准的试验装置设计要求以及试验装置的主要组成。重点是添加了温度控制系统,优化了潮差控制系统,模拟了海洋波浪。本试验装置是一种结构简单、能够较真实模拟海洋环境腐蚀的试验装置。该试验装置研制成功,为研究海洋用材料的腐蚀行为与机理提供重要的技术设备支持。     

浅析MDCB电磁波仪器在临震预测中的应用

本文简要分析电磁波的接收及仪器原理,介绍MDCB电磁波法进行地震短临预报的方法,统计了多次预报地震的结果,对这种预报方法进行了研究讨论,并与传统电磁波仪器预报地震的方法进行对比,指出这种预报方法的优点和存在的问题.     

环境样品中汞的最佳消解方法选择

本文通过选取（COD〈5ug／L、5-10ug／L、10-50ug／L、〉50ug／L4个范围内的水样，分别用4种消解方法：直接加硝酸法、溴酸钾、澳化钾法、高锰酸钾-过硫酸钾法（近沸保温法和煮沸法）进行汞的测定。通过测定结果对比，确定了在不同COD值的情况下，选择冷原子吸收光谱法测汞的最佳条件。     

基于超压值地铁上覆管道爆炸对隧道及人员安全影响研究

为分析地铁上覆管道爆炸对乘客安全影响,采用基于超压冲击波阀值数值模拟,通过将泄漏气体能量等效为TNT当量,分析不同泄漏模式爆炸冲击波对地铁隧道及人员安全影响.结果表明:爆炸产生的超压冲击波对隧道及人员影响小于限值,不会造成人员伤亡,研究结果可为地下工程下穿油气管线安全影响分析提供理论支撑.     

输气管道泄漏压力波的频谱特性模拟

为了研究输气管道泄漏压力波的频谱特性,基于大涡模拟对管道泄漏进行了非稳态分析。模拟了不同管道压力、不同泄漏孔径以及不同管道气体流速下的泄漏压力波频谱分布,探讨了不同条件对压力波频谱特性的影响。所得结论对各类管道泄漏压力波的频谱分析具有一定的借鉴作用。     

Influence of the elastic behaviour of liquids on transient flow from pressurised containments

Release of liquids from vessels and pipelines is a very important scenario in consequence assessment. When the operating pressure is significant, its evolution and the corresponding discharge rate are affected by the elastic behaviour of the liquid. Bulk modulus is the key-driver of the related fluid-dynamics and is expected to govern the elastic-to-atmospheric pressure transition. Despite the well known physical background, the availability of release models relevant to the elastic phase is rather poor, compared to those relevant to vapours, gases and atmospheric liquids. On the other hand, if the operating pressure is high, release times and dynamics are expected to be strongly affected by the elastic behaviour and prediction of release time and flow rate is fundamental. This article carries outs a general analysis of the elastic behaviour of liquids, including water and hydrocarbons. Lumped (vessel-type) and distributed (pipeline) parameters systems have been modelled with the aim to characterize the pressure evolution during the elastic phase and to evaluate the significance of the associated duration. The findings have shown that, depending on pressure and geometric features, the importance of the elastic phase is high and that the availability of reliable and relatively simple models could be beneficial in consequence assessment. The approach is strictly valid for non-boiling liquid, but accounting for vaporisation of flashing or boiling liquids such as LPG and LNG would not imply significant complications.     

Numerical simulations on the attenuation effect of a barrier material on a blast wave

This paper numerically modeled previous experimental results and quantitatively revealed the attenuation effect of a barrier material on a blast wave. Four fluids were considered in the present study: the detonation products, water, foamed polystyrene, and air. These fluids were modeled by Jones-Wilkins-Lee (JWL), stiffened gas, and ideal gas equations of state. A mixture of water and foamed polystyrene was used as a barrier to encircle a 0.1 kg mass of spherical pentolite, and the interface problem between the barrier and the blast wave was investigated. The simulation parameters were the radius and the water volume fraction of the barrier. To elucidate the effect of the barrier, we conducted two series of numerical simulations; one without a barrier, and another with a barrier of 50 or 100 mm in outer radius and 0–1 in the water volume fraction. Peak overpressure, positive impulse, and pressure history all agreed well with the previous experimental results. We focused on the energy transfer from high-pressure detonation products to other fluids. The sum of the kinetic energies of the detonation products and the barrier induced by the blast wave could quantitatively estimate the attenuation effect of the blast wave and was minimized when the water volume fraction was 0.5, as was the case in the previous experiment.     

兰姆波飞机结冰传感器的最佳工作模态研究

首先建立了兰姆波在覆盖冰层的无限大各向同性板中传播的波速方程。通过数值计算获得了在覆盖不同冰层厚度下薄板中兰姆波的色散曲线。接着绘制了在给定检测频率下兰姆波波速随厚度变化的关系曲线图,进一步提出了兰姆波飞机结冰检测过程中最佳模态的选取方法。研究结果表明冰层厚度与兰姆波波速之间存在对应关系,可以通过判断各阶模态的耦合情况来选取最佳检测模态。     

寒冷地区滨岸缓冲带植物筛选

为在寒冷地区建立高效的滨岸缓冲带水体工程,选择早熟禾、高羊茅、3种本地耐寒性植物,研究剪股颖构建河流滨岸缓冲带植物的经济性、生长特性、光合作用及其对悬浮物、氮、磷的净化能力。结果表明,3种植物在经济性方面高羊茅与早熟禾差别不大,远低于剪股颖;在生长特性方面,早熟禾与高羊茅的表现相近,高羊茅略好,但比剪股颖表现优秀,早熟禾在净光合作用速率、蒸腾速率以及水分利用效率方面比高羊茅及剪股颖出色;在面源污染物去除率方面,地表径流悬浮物的去除中,早熟禾表现突出;在溶解性磷与总氮的净化中,3种植物表现差异不大,早熟禾略有优势。综合比较各项指标,早熟禾可作为寒冷地区构建滨岸缓冲带较为理想的备选植物。     

内凹型蜂窝结构在冲击载荷作用下的力学行为及响应特性研究

为减少危险化学品爆炸事故造成的大量应急救援人员伤亡,提升应急救援人员防爆服的防爆能力,有效抵御由爆炸产生的冲击波、破片及高温对人体造成的伤害。研究了具有负泊松比效应的内凹蜂窝结构,通过准静态及激波管冲击实验,对比分析了传统蜂窝结构与内凹蜂窝结构在力学特性、吸能效果与冲击波衰减效率等方面的差异;通过改变内凹蜂窝中结构单元的凹角、尺寸以及构成蜂窝结构的原材料实现对蜂窝结构的优化设计,并对优化后的蜂窝结构吸能特性以及冲击波在结构中的衰减规律进行研究和综合分析。结果表明:内凹蜂窝结构单元的最佳尺寸为3.4 mm,最佳凹角为30°,最佳材料为钛合金。研究成果为寻求同时满足轻质高强、抗冲击和吸能效果要求的结构设计方案提供了理论基础。