Environmental and economic aspects of production and utilization of RDF as alternative fuel in cement plants: A case study of Metro Vancouver Waste Management

Municipal solid waste (MSW) disposal and management is one of the most significant challenges faced by urban communities around the world. Municipal solid waste management (MSWM) over the years has utilized many sophisticated technologies and smart strategies. Municipalities worldwide have pursued numerous initiatives to reduce the environmental burden of the MSW treatment strategies. One of the most beneficial MSWM strategies is the thermal treatment or energy recovery to obtain cleaner renewable energy from waste. Among many waste-to-energy strategies, refuse-derived fuel (RDF) is a solid recovered fuel that can be used as a substitute for conventional fossil fuel. The scope of this study is to investigate the feasibility of RDF production with MSW generated in Metro Vancouver, for co-processing in two cement kilns in the region. This study investigates environmental impacts and benefits and economic costs and profits of RDF production. In addition, RDF utilization as an alternative fuel in cement kilns has been assessed. Cement manufacturing has been selected as one of the most environmentally challenged industries and as a potential destination for RDF to replace a portion of conventional fossil fuels with less energy-intensive fuel. A comprehensive environmental assessment is conducted using a life cycle assessment (LCA) approach. In addition, cost–benefit analysis (CBA) has been carried out to study the economic factors. This research confirmed that RDF production and use in cement kilns can be environmentally and economically viable solution for Metro Vancouver.     

The use of state workers' compensation administrative data to identify injury scenarios and quantify costs of work-related traumatic brain injuries

PROBLEM: Traumatic brain injury (TBI) is a public health problem but little is known about the nature of that problem in the working population. METHOD: The author used a national definition to identify cases in Washington State from workers' compensation (WC) hospital billing data, quantified the cost of WC insurance benefits using actuarial cost estimates, and identified high risk industries using ANSI Z16.2 typology. RESULTS: There were 928 cases of TBI with a lifetime claim cost of $159 million from the Washington State Fund (1994-2001). Sixty percent of injuries resulted in death or disability. The highest risks of TBI are concentrated in 16 industrial insurance risk classes and the highest costs in 19 North American Industry Classification codes. Injury scenarios were identified for nine industrial insurance risk classes. CONCLUSIONS: TBI is a disabling and costly workplace injury in the state of Washington, affecting even teenagers and seniors who are not generally considered to be part of the workforce. Injury typology codes provide useful information for improving workplace safety. IMPACT ON INDUSTRY: This research provides industry with quantitative information regarding the cost of work-related traumatic brain injury and the usefulness of using workers' compensation claims data to reduce the burden of workplace injury.     

A Decision-Aid Framework to Provide Guidance for the Enhanced Use of Best Available Techniques in Industry

Best Available Techniques (BATs) contribute significantly to the reduction of industrial environmental burdens with respect to air pollution, wastewater, and solid wastes. In Europe, the application of BATs is prescribed by Directive 96/61/EC, which, however, leaves the selection of specific BATs to plant operators. In making their choices, installations have to consider not only the environmental benefits of BATs, but also all relevant cost components. In assessing the economic attractiveness of potential BATs and their combinations, as well as incentives and disincentives to be instituted, the cost of environmental externalities, usually not reflected in market prices, should be taken into account. In this paper, a decision-aid framework combining an assessment of environmental externalities and the utilization of multicriteria methods and, more specifically, Multiobjective Mathematical Programming, capable of addressing all these issues in a comprehensive and coherent manner, is presented. This is illustrated by its application for the region of Attica in Greece, where over 50% of the industrial basis and Athens, with its 4 million inhabitants, are located. The implementation of the framework and its associated tools to 800 installations led to the identification of the specific BATs, alone or in combination, that provide the most cost-effective reductions of four air pollutants (PM10, SO₂, NO_x, VOC) and CO₂. The results also clearly demonstrate the increased pollution reductions that would result from the adoption of BATs made economically attractive by the inclusion of externalities. Estimates of investments and net present values with and without incentives/disincentives are also provided.     

The use of cost–benefit analysis in environmental policies: Some issues raised by the Water Framework Directive implementation in France

This paper aims to practically contribute to the literature on the use of cost–benefit analysis (CBA) and economic evaluation in environmental decision-making through a practical case study: the implementation of the Water Framework Directive (WFD) in France, for the first cycle (2010–2015). The WFD requires that Member States achieve “good status” for all water bodies in 2015. However, exemptions can apply, if justified, on natural, technical or economic reasons. For the latter, EU guidance documents recommend to use CBA. In France, the water agencies carried out 710 CBAs on proposed restoration projects for water bodies. This article reports on this experience. Issues concerning these analyses are discussed, especially the assessment of non-market benefits. Finally, this article questions the use of economic analysis in the implementation of environmental policy.     

Projections of hospitalised fall-related injury in NSW, Australia: impacts on the hospital and aged care sectors

Projections of the number, rate and cost of fall-related hospitalised injuries for individuals aged 65 years and older in New South Wales (NSW), Australia were estimated to 2051 for two scenarios: (1) demographic change only using 2008 admission rates; and (2) modelled change using negative binominal regression taking into account current trends in admission rates. Based on demographic change alone, the number and cost of fall injury hospitalisations among older people is expected to increase almost three-fold by 2051. Transfers to permanent residential aged care will also increase 3.2 fold. However, if the fall-related hospitalisation rate sustains its current trend, these increases are projected to be more than ten-fold by 2051. Even with demographic change alone, there will be a significant impact on the resources required to care for older people suffering a fall injury hospitalisation over the next forty years in NSW. The impact on the hospital and aged care sectors will be considerable unless significant improvements occur in the prevention and treatment of fall-related injury in older people.     

Cost analysis in laccase production

In this paper the cost of producing the enzyme laccase by the white-rot fungus Trametes pubescens under both submerged (SmF) and solid-state fermentation (SSF) conditions was studied. The fungus was cultured using more than 45 culture medium compositions. The cost of production was estimated by analyzing the cost of the culture medium, the cost of equipment and the operating costs. The cost of the culture medium represented, in all cases, the highest contribution to the total cost, while, the cost of equipment was significantly low, representing less than 2% of the total costs. The cultivation under SSF conditions presented a final cost 50-fold lower than the one obtained when culturing under SmF conditions at flask scale. In addition, the laccase production under SSF conditions in tray bioreactors reduced the final cost 4-fold compared to the one obtained under SSF conditions at flask scale, obtaining a final price of 0.04 cent €/U.     

旅行费用法在旅游资源价值评估中的若干问题述评

旅行费用法(TCM)是一种基于观测资料评估旅游资源价值的显示偏好法。论文在文献梳理的基础上,对TCM研究过程中的偏差进行了述评,并指出了可能的解决方案;然后,讨论了TCM的有效性、适用性以及合法性,并提出进一步研究的重点和方向。文献综述表明:常见的TCM模型可以分为ZTCM、TCIA、GTCM、ITCM、HTCM和RUM六种类型,在研究中应根据实际情况选择合适的模型;旅行费用测度中的内生分层、抽样误差、时间的机会成本计算、多目的地之间的费用分成等问题,需求函数估算中的多重共线性、内生性、函数形式的选择等问题,均会导致评估结果出现偏差;TCM在发展中国家的有效性、适用性和合法性遭到了质疑,但仍不失为一种评估旅游资源价值的有效手段;今后的研究要加强TCM中的偏差分析及有效性检验,并着力于模型的修正和改进,加强TCM与CVM的结合,提高研究方法的有效性。     

Integrated Wastewater Management Reporting at Tourist Areas for Recycling Purposes, Including the Case Study of Hersonissos, Greece

Wastewater treatment facilities in tourist areas, in comparison to other municipal facilities, require specific configurations and additional management actions in order to achieve a reliable and cost-effective treatment. For example, the same facility operates during winter with minimum flows and in summer with peak flows. Moreover, careful effluent management is required to minimize environmental impact and health effects on tourists. In this study, effluent management data, including quantitative and qualitative effluent characteristics, reuse, and economic aspects of the Hersonissos Wastewater Treatment Plant (WTP) in Greece, are discussed. It has been designed to treat both municipal wastewater from the Hersonissos Municipality and septage from the wider area. Analysis of effluent quantitative data showed two flow peaks in the summer period and only one in winter. The WTP was found to provide a reliable level of treatment in terms of biochemical oxygen demand (95.9%), total suspended solids (97.2%), and total nitrogen (87.7%) removal, but increased numbers of fecal coliforms were measured at some peak flow periods, suggesting the need for additional management strategies. Effluent is reused mainly for agricultural irrigation; secondary uses include fire protection and landscape irrigation. Economic analysis showed that for each cubic meter treated, the total annual economic cost for treatment, filtration, and reuse infrastructure was 1.07 €, 0.05 €, and 0.08 €, respectively.     

关于“质量”问题的几点思考

关于“质量”的内涵 ,在物理学、哲学和经济学等方面有其不同解释。而生产的产品“质量”不仅包括其特殊功能指标 ,还包括其安全性、可靠性、使用寿命。它涉及生产者、使用者或消费者的生命安全与健康 ,甚至影响市场竞争与繁荣、社会稳定与文明、国民经济建设与可持续发展。因此 ,质量的安全问题在安全科学领域 ,在安全科技界 ,在市场流通和消费领域 ,一直为人们所关注。优质的物质产品必然是以人为本的、安全的、无害的 ,也必然是安全科技、环保科技含量很高的产品。笔者对以上领域关于“质量”的问题进行了研究 ,对经济学方面的质量与效益的内涵 ;质量与经济效益的关系、提高质量的途径和方法等问题进行探讨 ,阐述了自己的观点和看法。     

Lake management techniques in Florida,USA: Costs and water quality effects

Economic evaluations of restored or enhanced lakes in Florida indicated gravity drawdown was the least expensive action, whereas effluent diversion was 10,000 times more costly on a per hectare basis, with the other lake treatment costs occurring in the following order: gravity drawdown < grass carp introduction < mechanical drawdown < aeration < stormwater control = drawdown-dredging < effluent diversion. Within a particular treatment category, the costs spanned approximately one and one half orders of magnitude. Contrary to the abundant cost data, which permitted an economic analysis, inappropriate statistical design and lack of commitment toward sampling Florida's restored lakes undermines attempts to understand long-term water quality responses to various enhancement techniques. Using Lake Tohopekaliga as a case study, ordinary statistical tests produced contradictory and unreliable interpretations on the effectiveness of drawdown and phosphorus removal at sewage treatment plants in improving the trophic state index. This emphasizes the need for more robust statistical approaches and more detailed data collection in evaluating lake restoration activities It is unfortunate for Florida's lake restoration program that quantitative conclusions based on inferential statistics, replete with tests of assumptions, is limited to very few lakes