Characterization of natural organic matter in water for optimizing water treatment and minimizing disinfection by-product formation

正Introduction Natural organic matter(NOM)present in source water has significant impact on water treatment processes and on the quality of drinking water.NOM is a complex mixture of diverse groups of organic compounds,humic and fulvic acids,proteins,peptides,carbohydrates,and heterogeneous materials     

Enhancing nitrogen removal from low carbon to nitrogen ratio wastewater by using a novel sequencing batch biofilm reactor

Removing nitrogen from wastewater with low chemical oxygen demand/total nitrogen (COD/TN) ratio is a difficult task due to the insufficient carbon source available for denitrification. Therefore, in the present work, a novel sequencing batch biofilm reactor (NSBBR) was developed to enhance the nitrogen removal from wastewater with low COD/TN ratio. The NSBBR was divided into two units separated by a vertical clapboard. Alternate feeding and aeration was performed in the two units, which created an anoxic unit with rich substrate content and an aeration unit deficient in substrate simultaneously. Therefore, the utilization of the influent carbon source for denitrification was increased, leading to higher TN removal compared to conventional SBBR (CSBBR) operation. The results show that the CSBBR removed up to 76.8%, 44.5% and 10.4% of TN, respectively, at three tested COD/TN ratios (9.0, 4.8 and 2.5). In contrast, the TN removal of the NSBBR could reach 81.9%, 60.5% and 26.6%, respectively, at the corresponding COD/TN ratios. Therefore, better TN removal performance could be achieved in the NSBBR, especially at low COD/TN ratios (4.8 and 2.5). Furthermore, it is easy to upgrade a CSBBR into an NSBBR in practice.     

污染河流的纯氧曝气复氧

纯氧曝气复氧是治理污染河流、消除黑臭的有效工程措施之一。由于纯氧的压力高于空气中的氧分压，纯氧曝气可显著提高氧的转移速率。该文介绍了德国梅塞尔（Ｍｅｓｓｅｒ）集团开发的ＢＩＯＸ工艺，应用微孔软管曝气垫，可使水深５ｍ时氧利用率高达８０％。通过上海苏州河新泾港下游的应用实例和中试，结果表明，该工艺具有设备简单、运行安全可靠、维修极少、不生产任何噪声、对河水流态不生产扰动等突出优点，尤其适用于航运繁忙的     

生化需氧量(BOD)测定方法综述

分析评述了现阶段生化需氧量的实验室和快速测定方法的特点,指出了各类方法的影响因素、注意事项及应用范围。     

连续紫外扫描光谱法快速测定废水的化学需氧量

探讨了紫外扫描光谱最佳吸收波段内的吸光度集合所组成的峰面积与被测定废水的COD含量的相关性,同时进行了精密度和标准方法的比对实验,取得较好效果.该方法适用于多成分有机混合物的快速测定.     

Mercury removal from flue gas using nitrate as an electron acceptor in a membrane biofilm reactor

Membrane bioreactor achieved mercury removal using nitrate as an electron acceptor. The biological mercury oxidation increased with the increase of oxygen concentration. Ferrous sulfide could make both Hg²⁺ and MeHg transform into HgS-like substances. Nitrate drives mercury oxidation through katE, katG, nar, nir, nor, and nos. Mercury (Hg⁰) is a hazardous air pollutant for its toxicity, and bioaccumulation. This study reported that membrane biofilm reactor achieved mercury removal from flue gas using nitrate as the electron acceptor. Hg⁰ removal efficiency was up to 88.7% in 280 days of operation. Oxygen content in flue gas affected mercury redox reactions, mercury biooxidation and microbial methylation. The biological mercury oxidation increased with the increase of oxygen concentration (2%‒17%), methylation of mercury reduced with the increase of oxygen concentration. The dominant bacteria at oxygen concentration of 2%, 6%, 17%, 21% were Halomonas, Anaerobacillus, Halomonas and Pseudomonas, respectively. The addition of ferrous sulfide could immobilize Hg²⁺ effectively, and make both Hg²⁺ and MeHg transform into HgS-like substances, which could achieve the inhibition effect of methylation, and promote conversion of mercury. The dominant bacteria changed from Halomonas to Planctopirus after FeS addition. Nitrate drives mercury oxidation through katE, katG, nar, nir, nor, and nos for Hg⁰ removal in flue gas.     

Initial carbon release characteristics, mechanisms and denitrification performance of a novel slow release carbon source

External carbon source addition is one of the effective methods for the treatment of wastewater with low carbon to nitrogen ratio (C/N). Compared with fast-release liquid carbon sources, slow-release solid carbon sources are more suitable for the denitrification process. A novel slow-release solid carbon source (corncob-polyvinyl alcohol sodium alginate- poly-caprolactone, i.e. CPSP) was prepared using corn cob (CC) and poly-caprolactone with polyvinyl alcohol sodium alginate as hybrid scaffold. The physical properties and carbon release characteristics of CPSP and three other carbon sources were compared. CPSP had stable framework and good carbon release performance, which followed the second order release equation. The formic acid, acetic acid, propionic acid and butyric acid released from CPSP accounted for 8.27% ± 1.66 %, 56.48% ± 3.71 %, 18.46% ± 2.69% and 16.79% ± 3.02% of the total released acids respectively. The start-up period of CPSP was shorter than that of the other carbon sources in denitrification experiment, and no COD pollution was observed in the start-up phase (25–72 h) and stable phase (73–240 hr). The composition and structure of the dissolved organic compounds released by CPSP and other carbon sources were analyzed by UV-Vis absorption spectroscopy and three-dimensional fluorescence spectroscopy, which indicated that CPSP was more suitable for denitrification than the other studied carbon sources.

1. Download : Download high-res image (143KB)
2. Download : Download full-size image