Seasonal variation in dissolved gaseous mercury and total mercury concentrations in Juam Reservoir, Korea

Dissolved gaseous mercury (DGM) and total mercury (TM) concentrations were measured in Juam Reservoir, Korea. DGM concentrations were higher in spring (64+/-13pgL(-1)) and summer (109+/-15pgL(-1)), and lower in fall (20+/-2pgL(-1)) and winter (23+/-6pgL(-1)). In contrast, TM concentrations were higher in fall (3.2+/-0.1ngL(-1)) and winter (3.3+/-0.1ngL(-1)) than in spring (2.3+/-0.1ngL(-1)) and summer (2.2+/-0.4ngL(-1)). DGM concentrations were correlated with water temperature (p<0.0001), ORP (p<0.0001), UV intensity (UV-A: p=0.008; UV-B: p=0.003), and DOC concentration (p=0.0107). DGM concentrations varied diurnally with UV intensity. The average summer DGM (109+/-15pgL(-1)) and TM (2.2+/-0.4ngL(-1)) concentrations in Juam Reservoir were higher than the averages for North American lakes (DGM=38+/-16pgL(-1); TM=1.0+/-1.2ngL(-1)), but lower than levels reported for Baihua Reservoir in China.     

Effects of chemical modification on physicochemical properties and adsorption behavior of sludge-based activated carbon

This study aimed to explore the adsorption performance of sludge-based activated carbon (SBC) towards dissolved organic matters (DOMs) removal from sewage, and investigated the modification effect of different types of chemicals on the structure of synthesized SBC. Waste activated sludge (WAS) was used as a carbon source, and HCl, HNO₃, and NaOH were used as different types of chemicals to modify the SBC. With the aid of chemical activation, the modified SBC showed higher adsorption performances on DOMs removal with maximum adsorption of 29.05 mg/g and second-order constant (k) of 0.1367 (L/mol/sec) due to the surface elution of ash and minerals by chemicals. The surface elemental composition of MSBC suggested that the content of C-C and C-O functional groups on the surface of modified sludge-based activated carbon (MSBC) played an important role on the adsorption capacities of MSBC towards DOMs removal in sewage. Additionally, the residual molecular weight of DOMs in sewage was investigated using a 3-dimension fluorescence excitation-emission matrix (3D-EEM) and high-performance size exclusion chromatography (HP-SEC). Results showed that the chemical modification significantly improved the adsorption capacity of MSBC on humic acids (HA) and aromatic proteins (APN), and both of NaOH-MSBC and HCl-MSBC were effective for a wide range of different AMW DOMs removal from sewage, while the HNO₃-MSBC exhibited poorly on AMW organics of 2,617 Da and 409 Da due to the reducing content of macropore. In brief, this study provides reference values for the impact of the chemicals of the activation stage before the SBCs application.     

Comparison of inclined plate sedimentation and dissolved air flotation for the minimisation of subsequent nitrogenous disinfection by-product formation

The formation of disinfection by-products (DBPs), including both nitrogenous disinfection by-products (N-DBPs) and carbonaceous disinfection by-products (C-DBPs), was investigated upon chlorination of water samples following two treatment processes: (i) coagulation-inclined plate sedimentation (IPS)-filtration and (ii) coagulation-dissolved air flotation (DAF)-filtration. The removal of algae, dissolved organic nitrogen (DON), dissolved organic carbon (DOC) and UV₂₅₄ by coagulation-DAF-filtration was superior to coagulation-IPS-filtration. On average, 53%, 53% and 31% of DOC, DON and UV₂₅₄ were removed by coagulation-DAF-filtration process, which were higher than 47%, 31% and 27% of that by coagulation-IPS-filtration process. Additionally, coagulation-IPS-filtration performed less well at removing the low molecular weight organics than coagulation-DAF-filtration process. The concentrations of chloroform, dichloroacetamide (DCAcAm) and dichloroacetonitrile (DCAN) formed during chlorination after coagulation-DAF-filtration reached their maximum values of 13, 1.5 and 4.7 μg L⁻¹, respectively, and were lower than those after coagulation-IPS-filtration with the maximum detected levels of 17, 2.9 and 6.3 μg L⁻¹. However, the trichloronitromethane (TCNM) concentration after the two processes was similar, suggesting that DON may have less of a contribution to TCNM formation than DCAcAm and DCAN.     

Degradation of Pyrimethanil in Soil: Influence of Light,Oxygen, and Microbial Activity

The research was carried out in order to verify the influence that light, oxygen, and microbial activity have on the degradability of pyrimethanil (PYR) in soil. The products of degradation were also identified and their evolution in time evaluated. The results indicate that the molecule is more persistent in the absence of light, oxygen, and microbial activity. The order of importance of these three factors is as follows: light < microbial activity < oxygen. The following products of degradation were identified: (1) benzoic acid, (2) cis,cis-muconic acid, (3) hydroxyl-4,6-dimethyl-2-pirimidinamine, (4) N′-ethyl-N-hydroxyformamidine, and (5) 4,6-dimethyl-2-piridinamine, which appeared different from those reported in literature for the degradation of PYR in abiotic conditions. This result suggests that the degradation in soil is mainly biotic.     

The relationship between oxygen consumption rate and temperature during coal spontaneous combustion

Spontaneous combustion is a major natural disaster in coal production. In the process of exploring coal self-ignition, a series of hypotheses have been put forward, most scholars agree that the current coal-oxygen compound theory. Oxygen consumption rate reflects the status of coal spontaneous combustion, and it is also one of the parameters necessary for numerical simulation of coal spontaneous combustion. In this paper, a coal heating and oxidation experiment was designed, Experimental device consists of heating and oxidation furnace, gas chromatograph, temperature control and data acquisition systems and other equipment components. Three coal samples whose weight each is 5 g were selected for the study. By experiment, oxygen concentration at the inlet and outlet of temperature oxidation furnace was measured. Oxygen consumption rate is calculated in the heating process of coal according to air flow. In the Cartesian coordinate system, the temperature as abscissa and the oxygen consumption rate for the longitudinal coordinates, drawing the relationship between oxygen consumption rate and temperature plot. And then regression analysis was used to analyze the relationship between oxygen consumption rate and coal temperature during the heating and oxidation process of coal. The results show that the oxygen consumption rate and temperature of coal were linear relationships both before and after the critical temperature when the coal temperature is less than 180 °C. Before the critical temperature oxygen consumption rate is low, however it increases rapidly when coal temperature reaches a critical temperature. The result is important for the prevention and treatment of spontaneous combustion of coal.     

活性污泥数学模型中异养菌产率系数的测定研究

利用活性污泥数学模型预测污水生物处理系统,首先必须确定其参数和水质组分。采用间歇活性污泥法和呼吸计量法对活性污泥数学模型中异养菌产率系数γ_H进行测定研究。结果表明,间歇活性污泥法测定结果重现性较差,试验控制条件比较严格;呼吸计量法测定结果准确性较高,重现性良好,因而,呼吸计量法是比较可行的γ_H测定方法。     

膜电极法与碘量法测定长江水溶解氧的对比试验

本文对溶解氧的测定，用膜电极法和碘量法两种方法同时进行了对比测定，结果表明，两种方法的精密度基本一致．     

全程自养脱氨氮悬浮填料床反应器性能的研究

以NH+4-N溶液为基质建立和启运了全程自养脱氨氮悬浮填料床反应器,反应器连续运行的实验结果表明在pH为8.0～8.5、溶解氧为0.7～1.0mg/L和温度为28℃的条件下.当氨氮表面负荷为2～2.5g/(m2@d)时,其表面去除速率为1.1～1.3/(m2@d),全程自养脱氮率基本稳定在55%左右;全程自养脱氮的最适pH范围为7.5～8,5,其中最佳pH为8.0左右;最适溶解氧范围为0.5～1.5mg/L,其中尤以0.8～1.0ms/L左右为最佳.     

Influence of thermal environment on metallographic structure characteristics of the electric arc bead pattern

Electrical apparatuses are prone to arc, which generally causes a fire, even an explosion hazard, when a flammable gas mixture is present, especially during industrial processes. Terrible fire scenes are challenging for fire investigations. In this work, by performing a simultaneous thermal analysis test we simulated a fire environment and found that as the oxygen concentration decreased, the oxidation/exothermic peak temperature of ‘cause’ bead became higher, but the melting temperature was unaffected. Results indicated that the bead pattern underwent oxidation at approximately 831 °C, melting initiated at approximately 1060 °C, and the pattern then disappeared. The melted pattern grain changes were divided into three critical temperature stages: Approximately 600 °C, the onset temperature at which the melted pattern grains began to be equiaxed; approximately 831 °C, at which the grains were interspersed with oxygen-containing material; and 831–1060 °C, when the grains disappeared, which is a criterion for identifying electrical fires. However, the boundaries remained throughout the thermal environment process. Moreover, the bead pattern demonstrated three metallographic regions: Deep layer (Region I), the intermediate layer (Region Ⅱ), and surface layer (Region Ⅲ). Region I was the most thermally sensitive, in which equiaxed crystals first appeared. Region Ⅲ was the thermal reaction lag zone, in which the typical branching crystals finally disappeared, and Region Ⅱ was intermediate between Regions I and Ⅲ. The results may help fire investigators determine the fire scene temperature stages and provide support for fire evidence extraction.     

膜与活性炭组合工艺处理天然水的研究进展

活性炭吸附作为膜分离技术处理天然水的预处理,可以有效去除水中膜本身难以去除的低分子溶解性有机物,减少三卤甲烷等物的生成,同时减轻膜的污染。阐述了活性炭和膜技术组合工艺处理天然水的研究进展。