Residues of persistent organic pollutants in frequently-consumed vegetables and assessment of human health risk based on consumption of vegetables in Huizhou,South China

Concentrations of 16 polycyclic aromatic hydrocarbons (PAHs), 16 phthalate esters (PAEs), eight organochlorine pesticides (OCPs) and seven polychlorinated biphenyls (PCBs) in 17 frequently-consumed varieties of vegetables collected from 48 sites in Huizhou were measured. Concentrations of PAHs and PAEs of leafy vegetables were higher than those of gourd and fruit vegetables but it was the opposite for OCPs and PCBs. A questionnaire of 450 local residents on vegetable consumption showed that the total vegetable ingested rates of females and males were 278.80 g person⁻¹ d⁻¹ and 282.92 g person⁻¹ d⁻¹, respectively. The weight-specific daily intakes of pollutants by females were higher than those by males because of differences in body weight. Twenty-seven pollutants were used to assess the potential risk to human health by calculating target hazard quotient (THQ) values. Results showed that the risk to females was higher than for males. OCPs were the major contributors to the risk for both females and males. The main risks were from consumption of eggplant, Chinese lettuce and luffa and were significantly related to the contents of di-nonyl phthalate, β-hexachlorocyclohexane, γ-hexachlorocyclohexane, p,p-dichlorodiphenyltrichloroethane and p,p-dichlorodiphenyl dichloroethane in vegetables. Although the THQ values induced by individual pollutants were relatively low, the total THQ values induced by 27 pollutants were above 1 in some administrative regions of Huizhou, which might give cause for concern.     

Development and application of LC–APCI–MS method for biomonitoring of animal and human exposure to imidacloprid

Imidacloprid (IMI) is a relatively new neuro-active neonicotinoid insecticide and nowadays one of the largest selling insecticides worldwide. In the present study a LC–APCI–MS based method was developed and validated for the quantification of imidacloprid and its main metabolite 6-chloronicotinic acid (6-CINA) in urine and hair specimens. The method was tested in biomonitoring of intentionally exposed animals and subsequently applied for biomonitoring of Cretan urban and rural population.     

Linking Water Science to Policy: Results from a Series of National Workshops on Water

To ensure science better informs the decision-making process, researchers and policy/program managers need to understand and respect each other's way of working, culture and operational timelines. However, there is little practical guidance on how this should be done and even less documented experience with specific mechanisms that better link these two groups. The published literature on information transfer has largely emphasized the dissemination of standard packages of information to ill-defined constituencies whose needs for scientific information are not well understood. Environment Canada's National Water Research Institute, on behalf of the Canadian Council of Ministers of the Environment, led a series of “Linking Water Science to Policy Workshops” as one such mechanism by which recent science could be delivered to practitioners, and practitioners could identify their research needs to scientists and research managers. There is a pressing need to explore and share experiences using creative mechanisms for sustained dialogue and networking between scientists and policy and program managers. The lessons learned from the workshop series and the need for science to continually inform the decision-making process has particular relevance for Canada's Ecosystem Initiatives given their integrated, place-based focus on long-term restoration and protection, and the challenge of continually changing ecosystems.The Canadian Crown reserves the right to retain a non-exclusive, royalty free licence in and to any copyright.     

再生资源产业发展的战略思考与对策建议

再生资源产业对于破解我国资源环境约束、推动新型城镇化建设和促进产业结构调整具有重要的支撑作用.但是我国再生资源产业处于发展初期,面临管理体系不善、技宋鬟备落后、产业规 缺位和产业政策不清等突出问题.对此,提出六点具体建议,包括：加强立法和产业发展的顶层设计,构建再生资源高效回收体系,推动技术装备升级和推广,完善配套财税政策,强化产业规划统筹和部门政策衔接,加强与新型城镇化建设的融合等.     

Spatial & temporal variations of PM10 and particle number concentrations in urban air

The size of particles in urban air varies over four orders of magnitude (from 0.001 μm to 10 μm in diameter). In many cities only particle mass concentrations (PM10, i.e. particles <10 μm diameter) is measured. In this paper we analyze how differences in emissions, background concentrations and meteorology affect the temporal and spatial distribution of PM10 and total particle number concentrations (PNC) based on measurements and dispersion modeling in Stockholm, Sweden. PNC at densely trafficked kerbside locations are dominated by ultrafine particles (<0.1 μm diameter) due to vehicle exhaust emissions as verified by high correlation with NOx. But PNC contribute only marginally to PM10, due to the small size of exhaust particles. Instead wear of the road surface is an important factor for the highest PM10 concentrations observed. In Stockholm, road wear increases drastically due to the use of studded tires and traction sand on streets during winter; up to 90% of the locally emitted PM10 may be due to road abrasion. PM10 emissions and concentrations, but not PNC, at kerbside are controlled by road moisture. Annual mean urban background PM10 levels are relatively uniformly distributed over the city, due to the importance of long range transport. For PNC local sources often dominate the concentrations resulting in large temporal and spatial gradients in the concentrations. Despite these differences in the origin of PM10 and PNC, the spatial gradients of annual mean concentrations due to local sources are of equal magnitude due to the common source, namely traffic. Thus, people in different areas experiencing a factor of 2 different annual PM10 exposure due to local sources will also experience a factor of 2 different exposure in terms of PNC. This implies that health impact studies based solely on spatial differences in annual exposure to PM10 may not separate differences in health effects due to ultrafine and coarse particles. On the other hand, health effect assessments based on time series exposure analysis of PM10 and PNC, should be able to observe differences in health effects of ultrafine particles versus coarse particles.     

吸烟室内污染对家庭成员呼吸系统健康的影响

应用“家庭健康问卷调查”的方法,对中国兰州,重庆,武汉,广州４城市８所小学中的儿童家庭进行“吸烟室内污染对家庭成员呼吸系统健康的影响”调查,结果表明,吸烟的家庭比不吸烟的家庭室内污染严重,对人体健康有明显影响,其儿童患感冒咳嗽咳痰,支气管等病症的发生率,父亲吸烟的家庭比不吸烟的家庭要高出２倍６倍。     

Environmental and resource sustainability of Chinese cities: A review of issues,policies, practices and effects

This paper synthesizes the English literature on current issues, policies and practices, and their effects on environmental and resource sustainability in China's ongoing urbanization. Aspects of urban sustainability reviewed include air, water, solid waste, energy efficiency, transportation and land use. It shows that Chinese cities have been and probably will continue to be struggling with issues such as air pollution, scarcity of clean water, solid waste and greenhouse gas emissions. But there are many opportunities for improvement. It suggests shortages of existing policies and major gaps in knowledge and practice, which can be helpful to policy makers, planners and researchers in China and other developing countries.     

Priority screening of toxic chemicals and industry sectors in the U.S. toxics release inventory: a comparison of the life cycle impact-based and risk-based assessment tools developed by U.S. EPA

Life Cycle Impact Assessment (LCIA) and Risk Assessment (RA) employ different approaches to evaluate toxic impact potential for their own general applications. LCIA is often used to evaluate toxicity potentials for corporate environmental management and RA is often used to evaluate a risk score for environmental policy in government. This study evaluates the cancer, non-cancer, and ecotoxicity potentials and risk scores of chemicals and industry sectors in the United States on the basis of the LCIA- and RA-based tools developed by U.S. EPA, and compares the priority screening of toxic chemicals and industry sectors identified with each method to examine whether the LCIA- and RA-based results lead to the same prioritization schemes. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) is applied as an LCIA-based screening approach with a focus on air and water emissions, and the Risk-Screening Environmental Indicator (RSEI) is applied in equivalent fashion as an RA-based screening approach. The U.S. Toxic Release Inventory is used as the dataset for this analysis, because of its general applicability to a comprehensive list of chemical substances and industry sectors. Overall, the TRACI and RSEI results do not agree with each other in part due to the unavailability of characterization factors and toxic scores for select substances, but primarily because of their different evaluation approaches. Therefore, TRACI and RSEI should be used together both to support a more comprehensive and robust approach to screening of chemicals for environmental management and policy and to highlight substances that are found to be of concern from both perspectives.     

Controlling urban air pollution caused by households: uncertainty, prices, and income

We examine the control of air pollution caused by households burning wood for heating and cooking in the developing world. Since the problem is one of controlling emissions from nonpoint sources, regulations are likely to be directed at household choices of wood consumption and combustion technologies. Moreover, these choices are subtractions from, or contributions to, the pure public good of air quality. Consequently, the efficient policy design is not independent of the distribution of household income. Since it is unrealistic to assume that environmental authorities can make lump sum income transfers part of control policies, efficient control of air pollution caused by wood consumption entails a higher tax on wood consumption and a higher subsidy for more efficient combustion technologies for higher income households. Among other difficulties, implementing a policy to promote the adoption of cleaner combustion technologies must overcome the seemingly paradoxical result that efficient control calls for higher technology subsidies for higher income households.     

Minimizing external indirect health costs due to aerosol population exposure: a case study from Northern Italy

Environmental Agencies require Decision Support Systems, in order to plan Air Quality Policies considering the cost of emission reduction measures and the human health effects (with related social costs). The use of Decision Support Systems is also useful to spread information to general public, explaining the effectiveness of proposed air quality plans. In this paper, a multi-objective approach to control PM10 concentration at a regional level is presented. The problem considers both the internal costs (due to the implementation of emission reduction measures) and the external costs (due to population exposure to high PM10 concentrations). To model PM10 concentrations, a single surrogate model is used for the entire domain, allowing the implementation of a very efficient optimization procedure. The surrogate model is derived through a set of 10 simulations, performed using a Chemistry Transport Model fed with different emission reduction scenarios. The methodology is applied to Northern Italy, a region affected by very high PM10 concentrations that exceed the limit values specified by the EU legislation.