煤矿巷道瓦斯爆炸传播规律及破坏效应分析

井下瓦斯爆炸的影响因素众多,随机性强,分析和研究瓦斯爆炸的传播规律只有通过巷道模拟实验的方法。通过对爆炸过程中爆炸压力、温度、速度等相关参数随时间、空间的变化规律的分析,进一步研究瓦斯爆炸的机理和破坏效应,在煤矿生产过程中采取合适的阻隔防爆技术措施,减少瓦斯爆炸带来的损失。     

PBXN-5传爆药安全可靠性试验方法研究

为满足引信传爆序列对高可靠性、高安全性火工药剂的需求,通过小隔板试验及升降法试验对PBXN-5传爆药的输出能力和冲击波感度作了分析和研究,小样本试验发现:当施主药柱装药相同,随施主与受主间隔板厚度增加,可靠起爆概率明显降低;但随受主药柱的装药尺寸的减小,传爆概率却增大。总之,受主药柱直径越小,隔板越薄,使用可靠性越高,结合安全使用性,计算得到合适的可靠度数据,为微型火工品装药提供参数依据。     

电视、中波发射塔对电磁辐射环境的影响

通过对包头市城区历年的电磁环境监测,以及电视和中波发射塔周围电磁辐射情况,了解其环境质量状况和主要污染源。历年环境监测综合场强为0.30~0.47 V/m,年平均值为0.41 V/m。而广播和电视发射塔因距离而异,它们综合场强均值分别为1.26~3.43 V/m、1.44~5.34 V/m。虽然这些监测值都在标准限值之内,但可以看出广播和电视发射塔对电磁辐射综合场强的影响极大。     

油池火作用下钢管混凝土柱温度分布研究

在开敞空间条件下利用油池火模拟不同的火灾场景,对火源燃烧阶段和燃烧结束后钢管混凝土柱的温度变化进行研究。测量了燃料质量变化和钢管混凝土柱的温度分布等参数,分析不同火灾场景下钢管混凝土柱轴向、横截面的温度变化,并以实验工况HS3为例进行深入分析,同时分析了火源的燃烧时间、热释放速率对钢管混凝土柱温度场分布的影响。研究结果表明,钢管混凝土柱纵向温度分布与横向温度分布一样都存在明显的温度梯度,其表面钢管温度变化受火场热释放速率影响较大,而内部混凝土的温度变化则主要受火场持续时间的影响。     

受限空间瓦斯爆炸冲击波压力信号小波包去噪研究

由于受限空间瓦斯爆炸冲击波压力信号具有突变性和瞬态非平稳性特点,采用小波包分析进行去噪处理。选取典型的Daubechies小波包系和Symlets小波包系各小波包基对信号的重构均方根误差,并计算了原始信号与重构信号的相关系数,确定Sym8为处理瓦斯爆炸冲击波压力信号的最佳小波包基。去噪结果显示:小波包分析在降低噪声的同时,仍然保留信号突变部分的信息,能尽可能不失真得重现有效信号,受限空间瓦斯爆炸冲击波压力信号小波包去噪能够得到更可靠地结果。     

爆炸冲击荷载对动物杀伤作用距离的试验研究

采用3 kg、5 kg和10 kg装药在自由场中爆炸,观察分析距炸点不同距离的家兔在爆炸冲击波下的伤亡情况.试验同时使用冲击波超压测量仪记录不同位置的冲击波超压.试验结果表明,在超压小于0.08×105 Pa时家兔基本安全,3 kg、5 kg、10 kg炸药爆炸时的安全距离分别为20 m、25 m、30 m.     

烟气脱硫系统的吸收塔及停留时间

介绍了烟气脱硫系统中三种主要的吸收塔类型,及烟气在吸收塔中停留时间和喷淋吸收区高度的计算方法。简述了液气比与气速、烟气中SO2含量的关系,并列举了喷淋塔、动力波塔和平流塔等工程实例。     

南疆近60a来寒潮气候特征及其对农业生产的影响

寒潮是我区主要灾害性天气之一,南疆植被稀少,温差大,强冷空气南下,容易形成寒潮。论文利用南疆5地(州)1949-2008年间的寒潮发生频次、 持续时间及其造成的受灾农田面积、 死亡牲畜、 经济损失数据资料,对南疆寒潮空间分布、 年际变化、 季节变化、 形成原因及其对农业生产影响进行深入分析。分析得出:①近60 a来,南疆寒潮发生频次山区多于平原、 北部多于南部,而寒潮过程降温幅度天山南麓绿洲带大于北部山区;对地(州)而言,巴州发生频次最多,受灾最严重,阿克苏次于巴州,克州与和田寒潮频次与受灾最少,喀什居中。②近60 a来,寒潮发生频次年际变化幅度较大,总体上呈现略有减少趋势,特别是1999年来频次明显减少;每年9月至翌年5月是寒潮活动期,以5月和4月发生频次最高,极端最大降温以4-5月和9-10月居多。③在气候变暖背景下,虽寒潮频次总体上呈略有减少趋势,但由于4-5月寒潮较多,而且小麦返青拔节,棉花出苗蕾铃,果树生芽开花,其抗寒能力下降,遇到明显降温,就会发生冻害,加上绿洲种植面积扩大,社会经济发展,承载体单位面积的受灾成本提高,使南疆寒潮低温冻害灾害呈显著增多趋势。     

The interaction of heat shock proteins and some components of plant viruses北大核心CSCD

Considerable research has indicated that heat shock proteins (Hsp), as molecular chaperones, carry out many biological activities of plant viruses by folding, transporting, translocating, assembling, or degrading client proteins. It is fundamental to develop resistant plant varieties and novel anti-viral agents by determining the interaction mechanisms between plant viruses and hosts. In this study, we first reviewed the classification, gene and protein structure, and biological significances. We then analyzed the assembling mechanism of Hsp70 or Hsp90, plant host cofactors, and RNA-dependent RNA polymerases in a viral replicase complex, and the mechanism of interaction and subcellular localization between Hsp70 and some plant virus components. We highlighted the mechanism of interaction and movement between Hsp70 and some plant virus components and the effect of Hsp expression of plant hosts or viruses. The results indicated where the mechanism occurred, the participating factors, energy supply, and material conversion between Hsps and the plant virus components for the course of the intracellular movement, local movement between cells, and long-distance movement, and showed the Hsp type specificity and the law of dynamic Hsp expression in plant hosts infected by viruses. The studies mainly focused on the two Hsp factors and the plant viral components, indicating limited coordination mechanisms among many nucleic acids, proteins, and polysaccharides in macromolecular protein complexes (MRC). Future research should analyze the translocation mechanism between client proteins and Hsps, the coordination mechanism between Hsps and MRC components, and the relation between MRC and the plant tissue structure. © 2018 Science Press. All rights reserved.     

Theoretical and Experimental Investigation of a Novel Hybrid Heat-Pipe Solar Collector

Abstract

This article describes a novel flat plate heat-pipe solar collector, namely, the hybrid heat-pipe solar collector. An analytical model has been developed to calculate the collector efficiency as well as simulate the heat transfer processes occurring in the collector. The effects of heat pipes/absorber, top cover, flue gas channel geometry, and flue gas temperature and flow rate, on the collector efficiency were investigated based on three modes of operation, i.e., solar only operation, solar/exhaust gas combined, and solar, exhaust gas and boiler combined. Experimental testing of the collector was also carried out for each of these modes of operation under real climatic conditions. The results were used to estimate the efficiency of the collector and determine the relation between the efficiency and general external parameter. The modeling and experimental results were compared and a correlation factor was used to modify the theoretical predictions. It was found that the efficiency of the collector was increased by about 20–30% compared to a conventional flat-plate heat pipe solar collector.