重金属污染土壤的植物修复技术研究进展探讨

大多数传统的重金属污染治理技术成本高,会引起土壤肥力下降,对各类生态系统造成负面影响。植物修复技术是一种成本低、环境友好的方法,不会对土壤性质和生态系统产生不利影响。文章综述了植物修复治理重金属污染土壤的研究进展,探讨如何通过采取物理、化学、生物技术及农艺措施等方法提高修复植物的生物量和重金属积累量并展望了今后的研究方向。     

基于《环境影响评价》的研究性系列实验设计与教学实践研究

为提高高校本科生实验及实践类课程教学水平,基于笔者十余年实践类课程教学实践,介绍了以课程形式新建的具有研究性特质的系列本科生教学实验,实验素材主要源于“理论课程中的经典研究方法、学科前沿的科学研究实验和成熟的社会应用技术方法和规范”,最后基于具体实践教学案例,详细阐述了上述系列研究性实验的教学细节和流程.希望本研究的探索工作能够为中国高校实验教学的深入改革,以及建立基于学科的国家级基础实验教学示范中心提供基础和借鉴.     

加氢裂化REAC系统双相不锈钢管道焊缝铁素体含量的讨论

本文介绍了专利商对应用于加氢裂化REAC系统的双相不锈钢S32205焊接接头的要求,简要说明了双相不锈钢的焊接工艺评定;分析了填充金属化学成分、焊接线能量、焊接冷却速度对双相不锈钢焊缝铁素体含量的影响;分析了双相不锈钢焊缝铁素体含量达到专利商要求的能力,以及手工电弧焊焊缝铁素体含量达不到专利商35%~60%要求的原因是焊条化学成分设计的结果;分析了焊缝铁素体含量要求的合理性,介绍了AWS、API、NACE及国家行业标准对于双相不锈钢焊接接头铁素体含量的要求;介绍了现场的焊接工艺,以及使实际焊缝达到使用要求的方法.     

基于农村生活污水生态处理工艺研究

伴随我国经济发展的进步,虽然农村的生活水平得到一定的改善,但是并没有根据实际情况将相关生态处理技术应用,导致农村污水处理的效率无法有效的提升,严重影响农村的发展。基于此,本文主要分析了农村生活污水处理的方式,以及污水处理不当对人们的危害与影响,并阐述了农村污水处理的主要对策与方案,笔者根据自身经验提出相应的建议与意见。     

Ecological risk and accessibility analysis to assess the impact of roads under Habitats Directive

We propose a method for the appropriate assessment of adverse effects of roads in compliance with the European Union Habitats Directive. The method incorporates an analysis of ecological risk of edge effects by the proposed roads with the related increase in accessibility. The method was tested on 30 km of planned forest roads inside an 8,000-ha reserve included in two Natura 2000 sites. As a result, the cumulative effect of 19 road segments was judged as not significantly affecting the integrity of the sites, although they made accessible an extra 314 ha. On the basis of the accessibility calculation, 20 ha of land were set aside from forest exploitation as a mandatory mitigation measure. The method objectively determined the cumulative adverse effects, enabled comparison of plan revisions and alternatives and proved to measure direct and indirect significant effects with a realistic effort in terms of field survey and geographic information system processing.     

The Effect of Masterbatch Addition on the Mechanical, Thermal, Optical and Surface Properties of Poly(lactic acid)

There has been considerable interest in the use of the biodegradable polymer poly(lactic acid) (PLA) as a replacement for petroleum derived polymers due to ease of processability and its high mechanical strength. Other material properties have however limited its wider application. These include its brittle properties, low impact strength and yellow tint. In an attempt to overcome these drawbacks, PLA was blended with four commercially available additives, commonly known as masterbatches. The effect of the addition of 1.5 wt% of the four masterbatches on the mechanical, thermal, optical and surface properties of the polymer was evaluated. All four masterbatches had a slight negative effect on the tensile strength of PLA (3–5% reduction). There was a four fold increase in impact resistance however with the addition of one of the masterbatches. Differential scanning calorimetry demonstrated that this increase corresponded to a decrease in the polymer crystallinity. However there was an associated increase in polymer haze with the addition of this masterbatch. The clarity of PLA was improved through the addition of an optical brightener masterbatch, but the impact resistance remained low. The glass transition and melting temperatures of PLA were not affected by the addition of the masterbatches, and no change was observed in surface energy. Some delay in PLA degradation, in a PBS degradation medium at 50 °C, was observed due to blending with these masterbatches.     

Evaluating the use of Social Impact Assessment in the context of agricultural development projects in Iran

The utilisation of Social Impact Assessment (SIA) in Iran is analysed in terms of its policy context and its application in practice. Five case studies where SIA was employed in conjunction with Environmental Impact Assessments (EIA) for agricultural development projects are evaluated. In addition, the performance of the policy context is assessed. This research revealed that there are legal and institutional constraints to the effective functioning of SIA in Iran, and that there are deficiencies in the operating guidelines. There were serious problems associated with the way SIA was undertaken in all five case studies. Recommendations to improve the policy framework for the conduct of SIA are made. The recommendations advocate for a higher profile of SIA within legislation, for social issues to have greater emphasis in official guidelines for the conduct of EIA and SIA, and for a range of measures to increase the professionalism of SIA practice.     

Twentieth century droughts and agriculture: Examples from impacts on soybean production in Kentucky,USA

Drought is a significant natural hazard that slowly evolves over time. Because of its character, drought is difficult to monitor and impacts are often poorly documented. Agriculture is one of the most sensitive sectors that are prone to drought. The objective of this research is to assess the impacts of drought on soybean production and revenue in Kentucky. Soybeans are one of Kentucky’s most important commodities. In this study, impacts of 1930–1931, 1940–1942, 1952–1955, 1987–1988, 1999–2000, and 2007 droughts were considered. It was found that over the recent years, up to 56 % of the revenue from soybeans was lost due to drought. During the first half of the twentieth century, revenue loss reached up to 77 %. This research is valuable to the general public as well as planners and policy makers. Proper documentation of impacts of past droughts will help identify drought vulnerabilities and results in better risk management and mitigation.     

Implications of geographic variability on Comparative Toxicity Potentials of Cu, Ni and Zn in freshwaters of Canadian ecoregions

Current methods of estimating potential environmental impacts of metals in hazard and Life Cycle Impact Assessment (LCIA) do not consider differences in chemistry and landscape properties between geographic sites. Here, we developed and applied a model for regional aquatic impact characterization of metals using an updated method for estimating environmental fate factor (FF), bioavailability factor (BF) and aquatic ecotoxicity factor (EF). We applied the model to analyze differences in Comparative Toxicity Potentials (CTPs) of Cu, Ni and Zn for 24 Canadian ecoregions. The combined impacts of regional variability in ambient chemistry (in particular DOC, pH and hardness) and landscape properties (water residence time) can change the CTPs of these metals for freshwater by up to three orders of magnitude and change the relative ranking of metal hazard between ecoregions. Variation among Canadian freshwater chemistries and landscape characteristics influence the FFs within two orders of magnitude, BFs within two orders of magnitude for Ni and Zn and four orders of magnitude for Cu, and EFs within one order of magnitude. Sensitivity of metal FFs to environmental parameters alone spans three orders of magnitude when a constant water chemistry was used for all ecoregions. These results indicate that application of regionalised metal CTPs can have a significant influence in the analysis of ecotoxicological impacts in the life cycle assessment of products and processes.     

Redistribution of free tropospheric chemical species over West Africa: radicals (OH and HO₂), peroxide (H₂O₂) and acids (HNO₃ and H₂SO₄)

The purpose of this paper is to study the redistribution of chemical species (OH, HO₂, H₂O₂, HNO₃ and H₂SO₄) over West Africa, where the cloud cover is ubiquitously present, and where deep convection often develops. In this area, because of these cloud systems, chemical species are redistributed by the ascending and descending flow, or leached if they are soluble. So, we carry out a mesoscale study using the Regional Atmospheric Modelling System (RAMS) coupled to a code of gas and aqueous chemistry (RAMS_Chemistry). It takes into account all processes under mesh. We examine several cases following the period (November and July), with inputs emissions (anthropogenic, biogenic and biomass burning). The radicals OH and HO₂ are an indicator of possibilities for chemical activity. They characterize the oxidizing power of the atmosphere and are very strong oxidants. The acids HNO₃ and H₂SO₄ are interesting in their transformation into nitrates and sulfates in precipitation. In November, when photochemistry is active during an event of biomass burning, concentrations of chemical species are higher than those of November in the absence of biomass burning. The concentrations of nitric acid double and sulfuric acid increases 70 times. In addition, the concentrations are even lower in July if there is a deep convection. Compared to measures of the African Monsoon Multidisciplinary Analysis (AMMA), the results and observations of radicals OH and HO₂ are the same order of magnitude. Emissions from biomass burning increase the concentrations of acid and peroxide, and a deep convection cloud allows the solubility and the washing out of species, reducing their concentration. Rainfalls play a major role in solubility and washing out acids, peroxides and radicals in this region.