Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Sediment and Suspended Matter Lead Contamination in the Gulf of Kavala, Greece

Sediment and suspended particulate matter samples from 24 stations in the Gulf of Kavala have been examined for lead contamination. Grain size analysis and organic matter content were also performed. Total – anthropogenic sediment lead concentrations and enrichment factors at stations close to harbors and chemical industries were found higher (up to 209–135μg/g and 4.12 respectively), in relation to concentrations from the rest of the coastal zone. In the above areas, increased suspended particulate lead in the bottom of the water column was also recorded (up to 109μg/g). Total sediment lead concentrations composed of high natural Pb background increased with decreasing grain size, suggesting their association with the fine fractions of the sediments (31.1–66.0% mud presence) and the organic matter content (6–9% higher values). Overall, higher total lead concentrations in the sediments, determined by this work, appear to be significantly different from those reported for the Gulf of Kavala in previous studies and similar to those detected in other highly contaminated eastern Mediterranean coastal areas.     

Water Quality during Development and Apportionment of Pollution from Rivers in Tapeng Lagoon, Taiwan

This work investigated water samples collected from Tapeng Lagoon, Taiwan. Factor analysis was conducted to explain the characteristics and the variation in the quality of water during the disassembly of oyster frames and fishery boxes. The result shows that the most important latent factors in Tapeng Lagoon are the ocean factor, primary productivity factor, and the fishery pollution factor. Canonical discriminant analysis is applied to identify the source of pollution in neighboring rivers outside Tapeng Lagoon. The two constructed discriminant functions (CDFs) showed markedly contribution to all discriminant variables, and that total nitrogen, algae, dissolved oxygen and total phosphate, combined in the nutrient effect factor. The recognition capacities in these two CDFs were 95.6%, 4.4%, respectively. The water quality in the Kaoping river most strongly determined that in the Tapeng Lagoon the best is. And disassembling the oyster frames and fishery boxes improves the water quality markedly. However, environmental topographic conditions indicate that strengthening stream pollution prevention and to constructing another entrance to the ocean are the best approaches for improving the quality of water in Tapeng Lagoon, especially by reducing eutrophication. These approaches and results yield useful information concerning habitat recovery and water resource management.     

Cancer and Non-Cancer Health Risk from Eating Cassava Grown in Some Mining Communities in Ghana

Food crops such as cassava, cocoyam and other tuber crops grown in mining communities uptake toxic or hazardous chemicals such as arsenic, and cadmium, from the soil. Cassava is a stable food for Ghanaians. This study evaluated human health risk from eating cassava grown in some mining communities in Ghana such as Bogoso, Prestea, Tarkwa and Tamso, which are important mining towns in the Western Region of Ghana. The study evaluated cancer and non-cancer health effects from eating cassava grown in the study areas in accordance with US Environmental Protection Agency’s Risk Assessment guidelines. The results of the study revealed the following: cancer health risk for Tamso, 0.098 (RME – Reasonable Maximum Exposure) and 0.082 (CTE – Central Tendency Exposure). This means that approximately 10 and 8 out of 100 resident adults are likely to suffer from cancer related cases by RME and CTE parameters respectively. For Prestea, we have 0.010 and 0.12, which also means that approximately 1 out of 100 and 10 resident adults out of 100 are also likely to suffer from cancer related diseases by RME and CTE parameters. The results of the study obtained were found to be above the acceptable cancer risk range of 1× 10⁻⁶ to 1× 10⁻⁴, i.e., 1 case of cancer out of 1 million or 100,000 people respectively.     

The Metallic Composition of Aerosols at Three Monitoring Sites in Korea During Winter 2002

In the present study, the distribution patterns of various metals were analyzed and compared using PM samples collected concurrently from three monitoring sites located in Korea (Seoul, Busan, and Jeju island) in December 2002. As these sites can represent metal pollution with different degrees of anthropogenic activities, their concentration levels were distinguished in a systematic manner in the order of Jeju, Busan, and Seoul. By comparing the present data sets with those measured previously from other locations in Korea and around the world, we attempted to diagnose the general status of elemental pollution on the Korean peninsula. Through an application of different statistical approaches, the major processes controlling elemental levels were assessed for each of the three study sites. The results indicated the importance of both crustal and anthropogenic sources in all sites with their relative roles varying significantly from each other. The results of the metal analysis data, when examined in relation to back trajectory analysis, confirmed that their concentration changes are affected quite sensitively with air mass movement patterns. The overall results of this study consistently indicated the contribution of a strong anthropogenic source area (e.g., China) to the observed metal concentration levels in the study area, but the strengths of such signals vary considerably across the Korean peninsula.     

矿工心理因素、工作压力反应和不安全行为关系研究

为研究在巨大工作压力下,矿工的心理因素与工作压力反应和不安全行为的关系,以问卷的形式调查陕西省2家具代表性煤矿的工人,分别以矿工的心理因素、工作压力反应和作业过程中的不安全行为作为外生变量、中介变量和内生变量,构建心理因素、压力反应和不安全行为的结构方程模型。通过对调研数据处理与分析,得出如下结论:本研究中的4项心理因素,性格因素、心理素质、注意力和工作态度显著影响不安全行为的发生;性格因素、心理素质和注意力对压力反应有显著影响;工作态度与煤矿工人的压力反应的关系不显著;性格因素、心理素质、注意力和工作态度通过影响矿工的压力反应,间接影响矿工的不安全行为。     

阿什河底栖动物群落特征及影响因子

阿什河作为松花江的一级支流,全境包含了从Ⅰ类到劣Ⅴ类的各种类型水质。通过对阿什河沿线底栖动物群落构成进行调查,结合典范对应性分析(CCA)对底栖动物群落与环境因子进行相关性分析得出结论,溶解氧和高锰酸盐指数为研究区域内底栖动物群落构成的主要限制因子。为分析不同水质条件下底栖动物种群变化成因和从生物学角度提出阿什河治理方法提供技术依据。     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

基于因子分析法优选河流水体中氮浓度预测方法的研究

定量的河流水体中氮浓度预测方法有很多种,如何优选出预测精度较高的方法一直是学术界多年来致力于研究的重点。本研究采用因子分析法对预测方法的精度评价指标进行分析,并建立了预测方法精度的评价模型,对回归分析法、神经网络法、灰色系统法和增长率统计法4种水体氮浓度预测方法进行综合评估,优选出精度较高的河流水体氮浓度预测模型——BP神经网络预测模型。结果表明,此评估模型对类似研究具有一定的参考价值,能为选择出合适的河流水体氮浓度预测方法提供依据。