入太湖污水中三态氮水质模型的研究

本文通过多次现场调查与室内实验的数据分析,对流入太湖污水中三态氮水质模型的建立进行了初步探讨。研究表明,模型的计算数值与现场实测数值基本一致。     

几种典型除尘器收集效率的扩散模型研究

在气流速度均匀假设下用扩散理论建立了在重力沉降室、离心式除尘器和静电除尘器中粉尘粒子的浓度分布，由此浓度分布模型和除尘效率定义得出这3种典型除尘器的分级除尘效率具有相同的表达式：η=1—exp(-Dλ^2L/u)．为了使这一由扩散理论导出的分级效率公式能够用于实际计算，给出了扩散系数D的确定方法和常数λ的计算式．     

Kinetics and mechanism of nitrite oxidation by hypochlorous acid in the aqueous phase

The rate coefficient for the reaction of nitrite with hypochlorite and hypochlorous acid has been studied using spectrophotometric measurements. The reaction rate has been determined in a wide range of H(+) concentration (5< or =-log[H(+)]< or =11). The kinetics were carried out as a function of NO(2)(-), H(+) and total hypochlorite ([HOCl](total)=[HOCl]+[ClO(-)]+[ClNO(2)]) concentrations. The observed overall rate law is described by: -d[HClO](T)dt=[a[NO(2)(-)](2)+b[NO(2)(-)]][H(+)](2)c+d[H(+)]+e[NO(2)(-)][H(+)](2)[HOCl](total)At T=298 K and in Na(2)SO(4) at an ionic strength (I=1.00 M), we obtained using a nonlinear fitting procedure: a=(1.83+/-0.36)x10(7) s(-1), b=(1.14+/-0.23)x10(5) Ms(-1), c=(1.12+/-0.17)x10(-13) M, d=(1.43+/-0.29)x10(-6) M(2) and e=(1.41+/-0.28)x10(3) M where the errors represent 2sigma. According to the overall rate law, a/b=k(1)/k(3), b/e=k(3), c=K(w), d/c=K(a), d=K(a)K(w) and e=K(1)K(a). In Na(2)SO(4) at an ionic strength (I=1.00 M), the values of K(1) and K(a) are (1.1+/-0.1)x10(-4) and 1.28x10(7) M(-1), respectively. A mechanism is proposed for the NO(2)(-) oxidation which involves the reversible initial step: NO(2)(-)+HOCl left harpoon over right harpoon ClNO(2)+OH(-) (K(1)), while ClNO(2) undergoes the two parallel reactions: attack by NO(2)(-) (k(1)) and hydrolysis (k(3)). ClNO(2) and N(2)O(4) are proposed as important intermediates as they control the mechanism. The rate coefficients k(1) and k(3) have been determined at different ionic strengths in NaCl and Na(2)SO(4). The influence of the ionic strength and ionic environment has been studied in this work.     

Experimental verification for real-time environmental emergency response system: WSPEEDI by European tracer experiment

Japan Atomic Energy Research Institute has developed an emergency response system WSPEEDI to forecast long-range atmospheric dispersions of radionuclides discharged into the atmosphere. The latest version of WSPEEDI consists of an atmospheric dynamic model MM5 for calculating meteorological fields and a particle random-walk model for atmospheric dispersion. The performance of WSPEEDI was evaluated by data obtained from a field tracer experiment over Europe (ETEX) in this paper. The model validation was done with respect to the following points: (1) the dependence of model accuracy on the temporal and spatial resolutions of the meteorological fields and (2) the superiority of an atmospheric dynamic model over a mass-consistent wind model. Regarding (1), it was shown that the calculation accuracy of the new version with high temporal resolution was improved, especially at the edge of the plume. Moreover, although the increase in horizontal spatial resolution of the old version had no substantial effect on the model performance, increase in horizontal resolution of the new version contributed to the significant improvement of the calculation accuracy. These results showed that the dynamically calculated meteorological field with the spatial resolution of the meso-β–γ scale greatly improved calculation accuracy.     

Characterizing the source/sink behavior of double-layer building materials

A model is developed to predict the rate of mass transfer between a double-layer material and indoor air. The model allows non-uniform initial material-phase concentrations in each of the two layers and a transient influent gas-phase concentration to be considered. This model builds on a recently validated single-layer model and should prove useful in predicting the behavior of double-layer material assemblies. Many indoor furnishings and building structures are comprised of layers of different material. The approach taken here represents a first step in the development of a more generally applicable multi-layer model. An analytical solution to the double-layer model is obtained and a parametric analysis is performed illustrating the behavior of the model as a function of the primary model parameters. The paper concludes by examining the potential use of thin diffusion barriers to reduce material emission rates and a hypothetical example of emissions from an adhesive that is part of an adhesive/material assembly.     

污水源热泵机组性能的研究

利用热泵系统回收城市污水中的热能，既开发了一种清洁能源，同时又降低了城市废热的排放，保护了环境。通过对以水源热泵为中心设备的污水热能回收与利用实验装置冬季供暖工况的实验研究，考察了热泵机组在以污水（模拟）为热源时的工作性能，测得热泵机组性能系数为2．61。     

热带人工林生物物理参数及生物量对RADARSAT SAR信号响应研究

合成孔径侧视雷达穿透冠层而获得树干信息的特点使得其具有在南方NDVI易饱和地区的生物量估测方面优于光学遥感。文章利用地面实测调查数据,首次系统地研究了热带人工林生物物理参数及生物量对RADARSAT-SAR信号响应。结果表明:RADARSAT-SAR后向散射系数与森林生物量、树高、胸径可以用对数模型模拟。对于本实验区人工速生林来说,在森林生物量小于40 t.hm-2时RADARSAT-SAR后向散射系数与森林生物量具有较强相关性。桉树树高与后向散射系数的相关系数大于桉树胸径与后向散射系数关系。松树胸径与后向散射系数相关系数高于树高与后向散射系数的相关系数。研究结果为SAR在热带森林研究中的应用提供了一定的理论基础。     

取代苯乙酮类有机物溶解度和分配系数的测定

本文采用产生柱法测定取代苯乙酮类有机物的水溶解度和正辛醇-水分配系数,与静态法和振荡法测定的水溶解度、摇瓶法测定的正辛醇-水分配系数相比较,证明此方法是可行的,并和分子连接性指数呈良好的相关性。     

室内废气污染的计算与分析

通过对吸油烟机抽吸风场有效强度矢量图的测量 ,给出了吸油烟机质量技术检验方法和油烟废气、燃气废气污染泄漏量的计算方法 ;对油烟、燃气废气在厨房的扩散与循环作了详细分析 ,并对国标提出几点建议。     

圆孔翻边极限翻边系数的计算

根据板料屈服极限与断面收缩率的关系,推导出圆孔翻边时极限翻边系数的近似计算公式.