供水管网系统地震易损性风险评估

供水管网易损性风险评估就是通过识别和分析系统的易损性,找出管网中相对比较薄弱的部分,为确定安全策略和采取控制措施提供理论依据。借鉴网络脆弱性评估理论和方法,基于震后供水管网的连通性分析和水力分析结果,采用分层的分析方法,以管网的拓扑位置和节点服务特性作为影响管网易损性的因素,分配给各节点一定的权值,计算其易损性指标,采用定性与定量相结合的方法评判其易损性程度。对一实际管网进行地震易损性风险评估,说明了该方法的有效性与合理性。     

带板钢筋混凝土简支梁的耐火极限增大系数

利用SAFIR程序,对带板钢筋混凝土简支梁的耐火极限增大系数进行了分析。考察了梁的荷载比、配筋率、保护层厚度、跨高比,以及板的厚度、宽度、保护层厚度和配筋率等参数,对ISO834标准升温过程作用下带板简支梁的耐火极限增大系数的影响规律。通过1296种工况的计算分析,建立了该增大系数的实用计算公式。研究结果表明:①板的保护层厚度对该增大系数的影响较大,随着保护层厚度增加,该增大系数迅速增大;②板的厚度和纵筋配筋率对该增大系数的影响较小;③适当增加板的宽度可以提高该增大系数。     

基于弹性系数的大兴区环境-经济预警研究

在环境-经济系统中,选择弹性系数对区域节能减排做预警研究,构建基于弹性系数的区域环境-经济预警系统。将该预警系统应用于实际案例中,计算了符合北京市大兴区节能减排目标要求的弹性系数区间,对区域未来的环境-经济状况进行预测和预警。在惯性发展情景下,大兴区2010年和2020年环境-经济系统处于临界状态,节能减排达标尚存在一定困难,其中SO2、COD排放是区域环境-经济安全的最大影响因素。     

基于模糊数学的大气环境质量综合评价

鉴于大气环境质量评价中客观存在的不确定性和模糊性,运用模糊数学方法,选用SO2、NO2、PM10作为评价因子,参照大气环境质量标准,通过计算污染因子权重分配系数和隶属度对乌鲁木齐市2004年至2010年大气环境质量给出客观的评价,综合评价结果表明乌鲁木齐市总体大气环境质量为轻度污染(三级),但空气质量在逐年好转,SO2和PM10依然是乌鲁木齐市空气质量的制约因子,且NO2的权重在逐年上升。模糊综合评判考虑环境空气质量评价的模糊性,根据污染物浓度对各级别的贴近度考察污染物的级别,评价结果比较直观,可以细致准确的评价环境质量等级,评价结果基本可以反映环境空气污染的情况。     

规模化畜禽养殖产污系数研究

随着畜禽养殖逐渐走向规模化,畜禽养殖污染已成为农村污染的重要来源。以规模化畜禽养殖产生的废水和固体废弃物为监测对象,对规模化畜禽养殖产污系数进行研究,给出单位畜禽从出生到出栏的产污系数计算方法。以四川省内江市为实例,计算了不同季节、不同规模的规模化养猪场产污系数,并与第一次污染源普查数据进行比较。     

VFA generation from waste activated sludge: effect of temperature and mixing

The success of enhanced biological phosphorus removal (EBPR) depends on the constant availability of volatile fatty acids (VFAs). To reduce costs, waste streams would be a preferred source. Since VFAs were shown to vary in the incoming sewage and fermentate from primary sludge the next available source is waste activated sludge (WAS). The opportunity is particularly good in plants where WAS is stored before shipment. Little information is however available on the rate of VFA release from such sludge, especially at the lower temperatures and under the storage conditions typically found in colder climates. Bench-scale batch tests were performed to investigate the effect of temperature and requirement for mixing on VFA generation from WAS generated in full scale non-EBPR wastewater treatment plant. WAS fermentation was found highly temperature-dependent. Hydrolysis rate constant (k_h) values of 0.17, 0.08 and 0.04 d⁻¹ at 24.6, 14 and 4 °C were obtained, respectively. Arrhenius temperature coefficient was calculated to be 1.07. It took 5 d to complete hydrolysis at 24.6 °C, 7 d at 14 °C, and 9 d at 4 °C. The fermentation lasted for 20 d. At 24.6 °C the mixed reactor reached 84% of the overall VFA production only in 5 d. When temperature dropped to 14 and 4 °C, the ratio of VFA production at day 10 to overall VFA production in the mixed reactor were 62% and 48%, respectively. The overall VFA-COD concentration in the non-mixed reactors was much lower than the mixed reactors. The information is important for the designer as there was uncertainty with the effect of temperature and mixing on sludge fermentation.     

Cotinine concentrations in follicular fluid as a measure of secondhand tobacco smoke exposure in women undergoing in vitro fertilization: inter-matrix comparisons with urine and temporal variability

We examined the relationship between cotinine measures in follicular fluid (FF) and urine to inform our exposure assessment strategy for an ongoing epidemiological study of secondhand tobacco smoke (STS) exposure and early pregnancy loss. Among subjects undergoing in vitro fertilization (IVF), we compared cotinine levels in paired urine and FF samples from the same women and examined FF cotinine levels over time. We found a weak rank-order relationship (Spearman r < 0.2) and poor agreement for classifying nonsmoking individuals as exposed to STS (sensitivity = 0.29-0.71; specificity = 0.35-0.72) between cotinine concentrations in FF and urine. We observed fair reliability (ICC = 0.42-0.52) in FF cotinine concentrations from women undergoing multiple IVF cycles. If available, FF cotinine concentrations may be desired as a biomarker of low-level tobacco smoke exposure over urinary cotinine in studies of early reproduction. Collection of multiple FF samples for cotinine analysis may be needed to accurately represent long-term STS exposure.     

Effects of black carbon on bioturbation-induced benthic fluxes of polychlorinated biphenyls

It is unknown whether carbonaceous geosorbents, such as black carbon (BC) affect bioturbation by benthic invertebrates, thereby possibly affecting sediment-water exchange of sediment-bound contaminants. Here, we assess the effects of oil soot on polychlorinated biphenyl (PCB) mass transfer from sediment to overlying water, for sediments with and without tubificid oligochaeta as bioturbators. PCB levels were so low that toxicity to the oligochaeta played no role, whereas soot levels and binding affinity of PCBs to soot were so low that pore water PCB concentrations were not significantly affected by binding of PCBs to soot. This setup left direct effects of BC on bioturbation activity as the only explanation for any observed effects on mass transfer. Mass transfer coefficients (K_L) for benthic boundary layer transport were measured by a novel flux method using Empore™ disks as a sink for PCBs in the overlying water. For the PCBs studied (logK_ow 5.2-8.2), K_L values ranged from 0.2 to 2 cm × d⁻¹ in systems without tubificids. Systems with tubificids showed K_L values that were a factor of 10-25 higher. However, in the presence of oil soot, tubificids did not cause an increase in mass transfer coefficients. This suggests that at BC levels as encountered under field conditions, the mechanism for reduction of sediment-water transfer of contaminants may be twofold: (a) reduced mass transfer due to strong binding of the contaminants to BC, and (b) reduced mass transfer of contaminants due to a decrease in bioturbation activity.     

潞城市大气PM_（10）中化学元素分布特征

利用ICP-AES分析了潞城市采暖期和非采暖期4个不同功能区PM10样品中16种化学元素,对不同元素的时空分布特征进行了研究,并采用富集因子和主成分分析初步研究了潞城市PM10中元素的主要来源。结果表明,潞城市PM10中重金属污染较为严重,且各元素在采暖期的平均浓度均明显高于非采暖期。PM10中Ca、V、Cr、As、Ni、Mn、Cu、Zn、Al和Pb的富集因子EF〉10,主要来源于人为污染;而Na、Mg、Si、Fe和K的EF〈10,除部分来自人为活动外,主要来自土壤风沙等自然来源。主成分分析结果显示,潞城市PM10中元素的主要来源按贡献率大小依次为：煤烟尘和工业粉尘50.39%,自然源34.37%和机动车尾气15.24%。     

分散填料曝气塔多相流态分析与传氧性能表征

针对分散填料曝气塔中多相流的流态与传氧过程,实验了布气方式以及海绵和陶粒2种填料对于体系的气含率εg、流态以及气-液传质性能的影响。在表观气速U范围(0.01～0.18 m/s)内观察到81孔布气板(Φ1 mm)体系出现3个明显相区,孔数过少(25孔),或者孔间距较小(225孔)均没有明显过渡区,在湍流区(U>0.118 m/s)3种布气板的气含率没有明显差别。海绵填料体积分数εs<25%时体系的气含率没有明显变化,35%时气含率下降且过渡区提前出现。在非均相区,海绵填料明显提高了体系的传质系数KLa。陶粒填料降低了气含率,固含率对εg的影响差别不明显,同时降低了多相流体系的KLa,且随着固含率的增加KLa降低。对比多种操作条件,单位体积空气传氧能力KLa/εg无明显差别,但在81孔布气板的过渡区KLa/εg出现一个明显的极小区间,说明过渡区传氧效率较低。在特定的实验操作条件下,KLa/εg较为稳定,这为深入理解两种气泡群体的共存体系在传氧性能方面各自的权重,提供了重要的量化参考。