德国分散式污水处理系统微生物群落结构及功能

以德国分散式污水处理系统为研究对象,通过16S rRNA测序,研究2个反应器中微生物群落结构,利用PICRUSt软件对其功能进行推演.结果表明,冬季,污水厌氧膜生物反应器（AnMBR）内温度20℃,进水COD 712mg/L时,出水可获得52%的COD平均去除率,产气率为122L/kgCOD;固体废物厌氧反应器（PSD）内温度37℃,反应器内COD 3007mg/L时,可获得374L/kgVSS的产气率.2个反应器具有相似的微生物组成,对细菌,Synerigistaceae科的相对丰度最高（AnMBR：24.0%±10.0%;PSD：11.0%±3.1%）;对古菌,Methanobacteriaceae科的相对丰度最高（AnMBR：0.6%±0.3%;PSD：13.8%±1.8%）;2个反应器的功能基因组成也相似,产甲烷都以H₂还原CO₂的通路为主.PSD反应器中H₂还原CO₂通路相关基因、F420合成相关基因、辅酶M合成相关基因的相对丰度都高于AnMBR反应器.     

Addressing the challenges of implementing safety instrumented systems in multi-product batch processes

Adapting the requirements of IEC 61511 to a batch system can be frustrating, particularly for multi-product units. While a Safety Instrumented System (SIS) for continuous operation is often a straightforward detect-decide-act loop, implementing a SIS for a batch system may involve multiple safety functions, time- or state-dependence, intricate calculations, or complex installations. Relationships between the SIS elements and the basic process control system (BPCS) must be tightly managed, providing both for the safety of the unit and its ability to operate without spurious trips or other hindrances. These issues are further complicated when multiple products requiring different functions or setpoints are produced in the same SIS-protected batch unit.This paper will discuss the challenges particular to the design, operation, and maintenance of a SIS in multi-product batch operations and present practical options for successfully resolving the concerns. A key insight into successful adaptation is treating the batch SIS as a “permission” system for the BPCS to operate. Although many items can be addressed through clever engineering practices, sustainable success relies on proactive, robust management of the safety lifecycle.     

基于城市规划的开封市地质环境风险评价

随着城市化进程的加快,城市地质环境风险评价作为缓解日益严峻的人地矛盾,科学合理地利用地质环境的有效措施,对城市的规划和可持续发展有着十分重要的指导意义。针对开封市的城市规划,将不同类型功能区作为评价对象,建立了地质环境危险性和社会经济易损性评价指标体系,并采用通用的风险评价模型对开封市地质环境风险进行了评价。评价结果显示:开封市高风险区面积占1.21%;次高风险区面积占11.89%;次低、低风险区面积占86.9%。根据评价分区结果,提出了功能优化和风险防控建议。     

Characteristics of particulate-bound polycyclic aromatic hydrocarbons emitted from industrial grade biomass boilers

Polycyclic aromatic hydrocarbons(PAHs) are carcinogenic or mutagenic and are important toxic pollutants in the flue gas of boilers. Two industrial grade biomass boilers were selected to investigate the characteristics of particulate-bound PAHs: one biomass boiler retro-fitted from an oil boiler(BB1) and one specially designed(BB2) biomass boiler. One coal-fired boiler was also selected for comparison. By using a dilution tunnel system, particulate samples from boilers were collected and 10 PAH species were analyzed by gas chromatography–mass spectrometry(GC–MS). The total emission factors(EFs) of PAHs ranged from 0.0064 to0.0380 mg/kg, with an average of 0.0225 mg/kg, for the biomass boiler emission samples. The total PAH EFs for the tested coal-fired boiler were 1.8 times lower than the average value of the biomass boilers. The PAH diagnostic ratios for wood pellets and straw pellets were similar.The ratio of indeno(1,2,3-cd)pyrene/[indeno(1,2,3-cd)pyrene + benzo(g,h,i)perylene] for the two biomass boilers was lower than those of the reference data for other burning devices, which can probably be used as an indicator to distinguish the emission of biomass boilers from that of industrial coal-fired boilers and residential stoves. The toxic potential of the emission from wood pellet burning was higher than that from straw pellet burning, however both of them were much lower than residential stove exhausts.     

深圳市大鹏新区生态保护红线划定技术方法研究

生态保护红线是环境保护管理方法的一种创新,目前的研究多是针对生态功能和敏感性划定空间红线,对环境质量和资源承载能力的考虑相对较少.本文以深圳市大鹏新区为研究对象,在保障区域生态红线的性质不变、功能不降和面积不减的基础上,分别从环境质量红线、生态功能保障红线和资源利用3个方面开展生态保护红线的划分.结果表明:生态功能保障红线与生态控制线基本吻合,环境质量红线包括水环境容量利用红线和大气环境容量红线,其中,水环境容量红线为CODCr、NH3-N、TN和TP可利用的环境容量,分别为720.5、36.4、67.5和6.67t·a-1;大气环境容量红线为轨道交通分担50%的运力时,机动车为20000辆·d-1.资源利用红线为大鹏新区的最适旅游承载力,为18555人次·d-1,即677.3万人次·a-1.划分结果较好地反映了大鹏新区经济发展的自然和环境制约,可以为大鹏当地经济发展和环境保护管理提供相应的技术支持.     

污泥厌氧发酵产酸关键影响因素的函数模型研究

本研究以城市剩余污泥预处理液作为底物,调节底物不同C/N比,测定了厌氧发酵过程中几种关键酶的酶活及发酵产物乙酸、丙酸及丁酸的浓度.同时,利用Matlab软件通过回归分析和函数拟合构建了C/N比-关键酶活-酸产量之间的多项式函数模型,发现所建立的二元三次多项式模型的拟合优度R2均大于0.9,且残差平方和较小,因此,判定二元三次多项式更适合描述C/N比-关键酶活-酸产量的数学关系.最后,建立了关键酶活、C/N比和产酸量三因素间的曲面模型,发现该模型能够很好地描述污泥厌氧发酵中C/N比条件对关键酶和产酸类型的影响,并能进一步预测C/N比所对应的酶活和产酸发酵类型,可为今后的实验研究及工程放大提供理论参考.     

Chronic inhalation effects of trichloroethylene on hepatic microsomal mixed function oxidase system in rats

Inhalation effects of trichloroethylene, at levels of 0, 200 and 600 ppm for a period of 4 and 12 weeks, on the contents of hepatic microsomal protein, cytochrome P₄₅₀, cytochrome b₅, and on the activities of NADPH cytochrome C reductase, aminopyrine N‐demethylase and aniline hydroxylase were investigated. Body weight remained unaltered at 200 ppm level, whereas at 600 ppm level a significant decrease in body weight was observed. Liver weight showed increases at an exposure level of 200 ppm by the end of 4 and 12 weeks. Relative liver weight (% body weight) showed an increase at 200 and 600 ppm level by the end of week 4, whereas, after 12 weeks increase was observed only in animals exposed to the 600 ppm level. Hepatic microsomal protein was decreased by the end of 4 weeks at both the exposure levels. Cytochrome P₄₅₀ and cytochrome b, contents were increased at the 200ppm level after 4 and 12 weeks. NADPH cytochrome C reductase activity showed a marked increase at both the 200 and 600 ppm levels after 4 and 12 weeks. Aminopyrine N‐demethylase activity was increased at the 200 ppm level and decreased at the 600 ppm level by the end of 4 weeks, whereas, at the end of 12 weeks the aminopyrine N‐demethylase activity was near control values. Aniline hydroxylase activity was increased at the 200 ppm level after 4 and 12 weeks. Similarly, at the 600 ppm level aniline hydroxylase activity was increased after 12 weeks.     

危险废物多目标规划模型研究

根据危险废物系统管理的原则,采用全过程管理理念,运用最优化理论和系统分析方法,充分考虑各种因素,建立了危险废物多目标规划模型,并提出模型的求解方法。考虑废物间的相容性和复合效用函数,将所建立的危险废物多目标规划模型应用于重庆市主城区危险废物系统管理规划。结果表明,在设计的案例和场景下,分别以环境影响、经济因素、综合考虑环境因素和经济因素为首要因素考虑时,得到不同的优化方案。该模型的应用为环境管理者对危险废物系统管理提供了决策支持。     

Optimization of co-digestion of various industrial sludges for biogas production and sludge treatment: Methane production potential experiments and modeling

Optimal biogas production and sludge treatment were studied by co-digestion experiments and modeling using five different wastewater sludges generated from paper, chemical, petrochemical, automobile, and food processing industries situated in Ulsan Industrial Complex, Ulsan, South Korea. The biomethane production potential test was conducted in simplex-centroid mixture design, fitted to regression equation, and some optimal co-digestion scenarios were given by combined desirability function based multi-objective optimization technique for both methane yield and the quantity of sludge digested. The co-digestion model incorporating main and interaction effects among sludges were utilized to predict the maximum possible methane yield. The optimization routine for methane production with different industrial sludges in batches were repeated with the left-over sludge of earlier cycle, till all sludges have been completely treated. Among the possible scenarios, a maximum methane yield of 1161.53 m³ is anticipated in three batches followed by 1130.33 m³ and 1045.65 m³ in five and two batches, respectively. This study shows a scientific approach to find a practical solution to utilize diverse industrial sludges in both treatment and biogas production perspectives.