Metals in vineyard soils of the Penedès area (NE Spain) after compost application

The application of organic wastes to improve soil physical characteristics in mechanized vineyards planted after land levelling is becoming a common practice in Mediterranean areas. It may be useful as an additional source of organic matter and nutrients, but these wastes could also have negative effects due to their metal content. The aim of the study was to evaluate the influence of compost application on soil metal contents in mechanized vineyard soils of the Spanish Mediterranean area, where this practice is repeated every three years. The study was carried out in a ten-year-old vineyard where the main soil type is Typic Calcixerept. Composted cattle manure was applied in alternate rows, at a rate of 40 Mgha(-1) dry-weight. Nine sampling points were located along the slopes of two plots: a levelled plot prepared for mechanization with large soil disturbance movements within the plot, and a plot of undisturbed soil. At each location, soil samples were taken in both treated and untreated soils. Total concentrations (digestion with aqua regia) and the extractable DTPA (Diethylene-triaminepentacetic)-CaCl2-TEA (Triethanolamine) fractions of Cu, Zn and Mn were analyzed in each sample. For Cu and Zn, the initial concentration was higher in the undisturbed plot. In both cases, total Cu and total Zn were positively affected by manure input and the concentration in treated soils was significantly higher than in untreated soil. For Mn, the initial concentration was higher in disturbed soils than in undisturbed ones, and although in both scenarios the concentrations increased with manure, no significant differences were found between treated and untreated soils. The extractable fraction also increased in treated versus untreated soils, although for Cu and Mn the extractable/total metal ratio was similar in treated and untreated soils. After one compost application, total metal contents increased significantly, particularly for Zn. Most of those metals are accumulated in the soil, due to the soil characteristics.     

EDTA滴定法测定高锰水体总硬度的干扰和消除

测定水质总硬度最常用的是EDTA 滴定法,该法易受到多种因素的影响,而锰是重要影响因素之一。分析了锰对EDTA滴定法的影响,对比了两种掩蔽剂对不同浓度锰的掩蔽效果和对检测结果的影响。对实验结果进行了总结分析,为EDTA滴定法测定高锰水体总硬度过程中不同掩蔽剂的选择提供一定的依据。     

国内外总量管理制度发展历程对南京市的启示

本文介绍了国内外总量管理制度的发展历程,特别是"十三五"以来我国总量管理工作新的规定,并由此产生的针对南京市主要污染物总量管理工作的几点启示。     

Optimization of capture–recapture monitoring of elusive species illustrated with a threatened grasshopper

Information on population sizes and trends of threatened species is essential for their conservation, but obtaining reliable estimates can be challenging. We devised a method to improve the precision of estimates of population size obtained from capture–recapture studies for species with low capture and recapture probabilities and short seasonal activity, illustrated with population data of an elusive grasshopper (Prionotropis rhodanica). We used data from 5 capture–recapture studies to identify methodological and environmental factors affecting capture and recapture probabilities and estimates of population size. In a simulation, we used the population size and capture and recapture probability estimates obtained from the field studies to identify the minimum number of sampling occasions needed to obtain unbiased and robust estimates of population size. Based on these results we optimized the capture–recapture design, implemented it in 2 additional studies, and compared their precision with those of the nonoptimized studies. Additionally, we simulated scenarios based on thresholds of population size in criteria C and D of the International Union for Conservation of Nature (IUCN) Red List to investigate whether estimates of population size for elusive species can reliably inform red-list assessments. Identifying parameters that affect capture and recapture probabilities (for the grasshopper time since emergence of first adults) and optimizing field protocols based on this information reduced study effort (−6% to −27% sampling occasions) and provided more precise estimates of population size (reduced coefficient of variation) compared with nonoptimized studies. Estimates of population size from the scenarios based on the IUCN thresholds were mostly unbiased and robust (only the combination of very small populations and little study effort produced unreliable estimates), suggesting capture–recapture can be considered reliable for informing red-list assessments. Although capture–recapture remains difficult and costly for elusive species, our optimization procedure can help determine efficient protocols to increase data quality and minimize monitoring effort.     

基于改进的SPAR-H化工实验室人因可靠性分析

近年来化工实验室事故屡禁不止,其中人的不安全行为是导致事故发生的主要原因.为评估实验人员可靠性,进一步管控化工实验室人的不安全行为,基于标准化工厂人因可靠性分析(SPAR-H)方法,结合化工实验室人因失误的特点,确定了更加适用于化工实验室的人因可靠性分析方法.首先依据"S-O-P"认知模型对人因失误类型进行划分;然后基...     

Can we gain precision by sampling with probabilities proportional to size in surveying recent landscape changes in the Netherlands?

Seventy-two squares of 100 ha were selected by stratified random sampling with probabilities proportional to size (pps) to survey landscape changes in the period 1996–2003. The area of the plots times the urbanization pressure was used as a size measure. The central question of this study is whether the sampling with probabilities proportional to size leads to gain in precision compared to equal probability sampling. On average 1.03 isolated buildings per 100 ha have been built, while 0.90 buildings per 100 ha have been removed, leading to a net change of 0.13 building per 100 ha. The area with unspoiled natural relief has been reduced by 2.3 ha per 100 ha, and the length of linear relicts by 137 m per 100 ha. On average 74 m of linear green elements have been planted per 100 ha, while 106 m have been removed, leading to a net change of −31 m per 100 ha. For the state variables ‘unspoiled natural relief', ‘ linear relicts', ‘removed linear green elements', and ‘new – removed linear green elements' there is a gain in precision due to the pps-sampling. For the remaining state variables there is no gain or even a loss of precision (`new buildings', ‘removed buildings', ‘new – removed buildings', ‘new linear green elements'). Therefore, if many state variables must be monitored or when interest is not only in the change but also in the current totals, we recommend to keep things simple, and to select plots with equal probability.     

基于TVR的腐蚀油气管道失效概率及安全寿命研究

为避免因腐蚀导致油气管道失效,针对因管道特性和腐蚀尺寸的不确定性使得管道剩余强度成为概率模型的特点,建立了腐蚀管道强度损失随机模型;借助可靠性理论,通过分析管道腐蚀进程的时变性特点,将管道系统由损伤积累和抗力衰减导致的剩余强度随机化;提出基于穿越率的腐蚀油气管道失效评定及安全寿命预测方法。研究结果表明:腐蚀速率和运行压力对管道失效概率及安全寿命影响显著,管道尺寸影响适中,而相关系数和拉伸强度影响较小;若腐蚀速率Va=0.2 mm/a,VL=10 mm/a或局部腐蚀缺陷半径达到管道壁厚的0.5倍时,建议作为重点风险段监测并检修。所建方法是对腐蚀油气管道运营监控和风险评估的有益补充。     

Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery1

Claggett, Peter R., Judy A. Okay, and Stephen V. Stehman, 2010. Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery. Journal of the American Water Resources Association (JAWRA) 46(2):334-343. DOI: 10.1111/j.1752-1688.2010.00424.x Abstract: The Chesapeake Bay watershed encompasses 165,760 km² of land area with 464,098 km of rivers and streams. As part of the Chesapeake Bay restoration effort, state and federal partners have committed to restoring 26,000 miles (41,843 km) of riparian forest buffers. Monitoring trends in riparian forest buffers over large areas is necessary to evaluate the efficacy of these restoration efforts. A sampling approach for estimating change in riparian forest cover from 1993/1994 to 2005 was developed and implemented in Anne Arundel County, Maryland, to exemplify a method that could be applied throughout the Bay watershed. All stream reaches in the county were stratified using forest cover change derived from Landsat imagery. A stratified random sample of 219 reaches was selected and forest cover change within the riparian buffer of each sampled reach was interpreted from high-resolution aerial photography. The estimated footprint of gross change in riparian forest cover (i.e., the sum of gross gain and gross loss) for the county was 1.83% (SE = 0.22%). Stratified sampling taking advantage of a priori knowledge of locations of change proved to be a practical and efficient protocol for estimating riparian forest buffer change at the county scale and the protocol would readily extend to much broader scale monitoring.     

Integrated biological responses of zebrafish (Danio rerio) to analyze water quality in regions under anthropogenic influence

This study analyzed water quality in regions around Patos lagoon (Southern Brazil) that are under anthropogenic pressure. Water samples were collected from five different sites, including one used as a source for human consumption (COR) and others known to be influenced by human activities (IP). Danio rerio (Teleostei, Cyprinidae) organisms were exposed for 24 h to these water samples, plus a control group. It was observed that: (1) reactive oxygen species levels were lower in COR and IP than in the control group; (2) glutamate-cysteine ligase (catalytic subunit) expression was higher in COR than in other sites; (3) exposure to all water samples affected long-term memory (LTM) when compared to control group. Thus, some water samples possess the ability to modulate the antioxidant system and to induce a decline in cognitive functions, as measured by LTM. The obtained results indicate that a combination of variables of different organization level (molecular, biochemical and behavioral) can be employed to analyze water quality in impacted regions.     

Methodology of industry scale analysis under the constraint of regional resource capacity using HSY algorithm

This paper develops a methodology of proper scale analysis for regional industry development, which can be used in industry planning with the consideration of regional resource capacities. In the face of different data sources and even data scarcity, alternative methods based on linear programming and quadratic programming algorithms for calculating the resource intensity factors are designed. Based on the empirical study of industrialization, initial scenarios of industry development were set. Using HSY algorithm, sensitive industries that may cause exceeding regional resource capacity can be identified, and the risk of exceeding can be predicted and expressed in probability. Furthermore, a proper scale range can be designed for these sensitive industries according to resource capacity. Taking the case of Dalian city in China, this paper estimated the regional urban development plan, various resources capacities were studied, and land resources were estimated to be the most critical resource for the city. The land resource depletion intensities of different industries are calculated by quadratic programming algorithm. Under the constraint of 427.56 km² available industrial land resources, the electronic and power industries have the most significant impact on total land use, if the scale of power industry exceeds 1.27 billion USD, the probability of land resource capacity breakthrough will be 50%.