中原城市群区域碳储量的时空变化和预测研究

为了有效评估中原城市群碳储量,运用灰色预测模型获取动态碳密度数据,结合Dyna-CLUE模型和InVEST模型,动态评估2005~2030年土地利用变化下不同情景的碳储量演变特征,以及城市发展对碳储量的影响.结果表明,2005~2020年中原城市群碳储量分别为1689.59×10⁶t、2035.36×10⁶t、2066.34×10⁶t和2093.05×10⁶t,呈现持续增加趋势;2030年经济发展情景、生态保护情景和经济生态协调发展情景下碳储量分别为2162.45×10⁶t、2179.39×10⁶t和2174.28×10⁶t,经济发展情景下碳储量最低,生态保护情景下碳储量最高.碳储量变化与土地利用面积变化密切相关,主要表现为耕地面积的下降导致其碳储量减少约250×10⁶t,林地面积的扩张导致其碳储量增加约103.4×10⁶t,建设用地的扩张导致其碳储量增加约87.77×10⁶t;耕地和草地面积与总碳储量呈较弱的负相关关系,林地、水域、建设用地和未利用地面积与总碳储量呈较强的正相关关系.2005~2030年中原城市群30个城市的碳储量分别为11.38×10⁶t~214.24×10⁶t,碳储量的变化反映出城市土地碳排放在2030年之前已经达到峰值,且经济生态协调发展情景可能更适合未来城市发展的目标.     

油田聚合物驱采出污水絮凝过程研究

针对油田聚合物驱（简称聚驱）采出污水,通过对油滴粒度分布、絮凝指数、油水分离特性和Zeta电位等指标的测定,研究了聚合物、温度、药剂以及搅拌强度对絮凝过程的影响,并探讨了影响聚驱采出污水油水分离效果的主要原因.结果表明,静电排斥并不是聚驱采出污水异常稳定的主要原因. 聚驱采出污水的油水分离特性与水驱采出污水相比存在显著差别,主要因为聚合物阻碍了小油滴的碰撞絮凝. 投加250mg/L由改性聚醚类破乳剂和弱阳离子絮凝剂复合而成的CHP-03药剂,可以有效克服聚合物的阻碍作用,获得92%的含油去除率. 该药剂在絮凝过程中并不依靠电中和机理来实现油滴的脱稳. 在现场条件下,温度的提高不能明显地促进油滴絮凝的有效性. 适当的高速搅拌可以加快絮体生长. 油滴之间的聚结破乳滞后于絮凝,絮凝的后期应避免剧烈搅拌,防止尚未聚结破乳的油滴重新分散.     

聚丙烯酰胺对聚合物驱含油污水中油珠沉降分离的影响

研究发现阴离子聚丙烯酰胺(HPAM)对聚合物驱含油污水处理有正反2方面影响.聚合物能增加污水粘度,降低油珠上浮速度,而且聚合物能增加油水界面水膜强度,延缓油珠聚并时间,这是聚合物对油珠沉降分离的不利影响;同时,聚丙烯酰胺具有絮凝性,能将水中油珠连接到一起,有利于油珠聚并.当聚丙烯酰胺相对分子质量为2.72×10⁶,浓度小于800mg/L时,絮凝作用大于粘度作用,有利于油珠的沉降分离.初始油珠粒径小是聚合物驱含油污水难处理的主要原因.横向流除油器可以加速油珠聚并,缩短沉降时间,适合处理聚合物驱含油污水.     

Quantifying the characteristics of particulate matters captured by urban plants using an automatic approach

It is widely accepted that urban plant leaves can capture airborne particles. Previous studies on the particle capture capacity of plant leaves have mostly focused on particle mass and/or size distribution. Fewer studies, however, have examined the particle density, and the size and shape characteristics of particles, which may have important implications for evaluating the particle capture efficiency of plants, and identifying the particle sources. In addition, the role of different vegetation types is as yet unclear. Here, we chose three species of different vegetation types, and firstly applied an object-based classification approach to automatically identify the particles from scanning electron microscope(SEM)micrographs. We then quantified the particle capture efficiency, and the major sources of particles were identified. We found(1) Rosa xanthina Lindl(shrub species) had greater retention efficiency than Broussonetia papyrifera(broadleaf species) and Pinus bungeana Zucc.(coniferous species), in terms of particle number and particle area cover.(2) 97.9% of the identified particles had diameter ≤10 μm, and 67.1% of them had diameter ≤2.5 μm. 89.8% of the particles had smooth boundaries, with 23.4% of them being nearly spherical.(3) 32.4%–74.1% of the particles were generated from bare soil and construction activities, and 15.5%–23.0% were mainly from vehicle exhaust and cooking fumes.     

Assessment of lead pollution in topsoils of a southern Italy area: Analysis of urban and peri-urban environment

Exposure to lead (Pb) may affect adversely human health. Mapping soil Pb contents is essential to obtain a quantitative estimate of potential risk of Pb contamination. The main aim of this paper was to determine the soil Pb concentrations in the urban and peri-urban area of Cosenza–Rende to map their spatial distribution and assess the probability that soil Pb concentration exceeds a critical threshold that might cause concern for human health. Samples were collected at 149 locations from residual and non-residual topsoil in gardens, parks, flower-beds, and agricultural fields. Fine earth fraction of soil samples was analyzed by X-ray Fluorescence spectrometry. Stochastic images generated by the sequential Gaussian simulation were jointly combined to calculate the probability of exceeding the critical threshold that could be used to delineate the potentially risky areas. Results showed areas in which Pb concentration values were higher to the Italian regulatory values. These polluted areas were quite large and likely, they could create a significant health risk for human beings and vegetation in the near future. The results demonstrated that the proposed approach can be used to study soil contamination to produce geochemical maps, and identify hot-spot areas for soil Pb concentration.     

Long Term Trends in Concentration of Major Pollutants (SO<Subscript>2</Subscript>, CO,NO, NO<Subscript>2</Subscript>, O<Subscript>3</Subscript> and PM<Subscript>10</Subscript>) in Prague – Czech Republic (Analysis of Data Between 1992 and 2005)

To assess the effect of changes in traffic density and fuels used for heating at the beginning of the 1990s, 1992–2005 monthly averages of PM₁₀, SO₂, NO₂, NO, CO and O₃ from Prague, the Czech capital, were analyzed together with long term trends in emissions of major pollutants, fuel consumption and number of vehicles registered in Prague. The data from all monitoring stations were retrieved from the database of the state automated monitoring system. Correlation coefficients between ambient monthly averaged temperature and all pollutants of concern showed distinct seasonal trends. The results showed that while SO₂ and to some extent also CO concentrations dropped namely in the first half of the analyzed period (1992–1997) as a result decreased fossil fuel consumption for local heating, the behaviour of other pollutant concentrations followed a different pattern. PM₁₀ concentrations decreased during the beginning of the 1990s but showed a sign of increase after 2000. Concentrations of ozone and NO₂ did not reveal any significant change throughout the whole studied period. It can be concluded that during the studied period traditional urban sources of pollution, such as coal and oil combustion, lost their importance but were simultaneously substituted by pollutants from automotive transport (namely PM and NO₂) making the problem of air quality even worse.     

Evaluating Infiltration Requirements for New Development Using Extreme Storm Transposition: A Case Study from Dane County,WI

Changes in land use and extreme rainfall trends can lead to increased flood vulnerability in many parts of the world, especially for urbanized watersheds. This study investigates the performance of existing stormwater management strategies for the Upper Yahara watershed in Dane County, WI to determine whether they are adequate to protect urban and suburban development from an extreme rainfall. Using extreme storm transposition, we model the performance of the stormwater infiltration practices required for new development under current county ordinances. We find during extreme rainfall the volume of post‐development runoff from impervious surfaces from a typical site would increase by over 55% over pre‐development conditions. We recommend the ordinance be strengthened to reduce vulnerability to flooding from future urban expansion and the likely increase in the magnitude and frequency of extreme storms.     

城市水环境建设中的资本运作探讨

城市水环境的治理和改善需要高额资金，建设中的资本运作尤为重要。本文在论述了传统水环境建设投资模式及其缺陷的基础上提出了城市水环境建设中资本运作的基本思路，从成立专业投资公司、拓宽融资渠道和确立收益回报形式等几个主要环节详细阐述了资本运作基本模式的组成和功能，介绍了新的融资渠道和收益形式，并对新的资本运作模式应注意的问题进行了深入的分析。     

非离子型聚丙烯酰胺絮凝剂的制备及其絮凝性能

以丙烯酰胺（AM）和烷基酚聚醚（APAP）为单体,采用反相乳液聚合法制备了流动性好的非离子型聚丙烯酰胺絮凝剂（PAM-APAP）。考察了乳化剂和引发剂的种类、单体总质量分数、单体配比和反应温度等因素对聚合反应的影响。实验结果表明,制备PAM-APAP的最佳工艺条件为：单体总质量分数35%、m（AM）∶m（APAP）=9.0∶1.0、Span80+Tween80复配乳化剂加入量为油水总质量的7%、m（Span80）∶m（Tween80）=7.0∶1.5、V50加入量为单体总质量的1.5‰、反应温度50℃。PAM-APAP具有较好的絮凝效果,与其他絮凝剂相比用量较少,在加入量为100mg/L时,对聚合物驱油中产生的含聚合物污水的浊度去除率为87.9%,去油率为89.5%,且絮体不黏壁。     

淹水对酸性红壤磷吸附解吸特性的影响——以江西省旱地红壤和水稻土为例

采用室内培养法研究了淹水对2种酸性红壤（旱地红壤、水稻土）磷吸附解吸特性及草酸可提取态P的影响。淹水培养实验中,2种土壤分别淹水0（对照）,1、2、3、4、8周,淹水培养结束后进行P吸附解吸实验,解吸实验结束后测定土样中草酸可提取态P。结果表明：与氧化状态相比,淹水后旱地红壤P吸附量减少,水稻土淹水1、2、3周P吸附量高于氧化状态,继续淹水4和8周后P吸附量减少。淹水前后旱地红壤P吸附量均大于水稻土。用简单Langmuir方程拟合P等温吸附曲线,除淹水4周外,P最大缓冲容量（MBC）随淹水时间延长而降低。结合能常数（K）淹水前后的变化规律性差。2种土壤P解吸量随加入P量增加而增加。氧化、还原状态下,2种土壤酸性草酸铵可提取P均远远大于CaCl2解吸P,虽然水稻土吸附P量低于旱地红壤,但P解吸量无论是CaCl2解吸P还是酸性草酸铵可提取P均大于旱地红壤,主要原因在于水稻土全P及速效P含量大于旱地红壤。淹水后草酸可提取态P增加,吸附P的释放和被新近形成的铁氧化物再吸附是淹水后草酸可提取态P增加的主要原因。