Sustainable management of demolition waste—an integrated model for the evaluation of environmental, economic and social aspects

A model is presented for evaluating waste management systems for their contribution to a sustainable development, including environmental, economic and social aspects. The model was tested in a case-study, where groups of long-term unemployed people were offered both education on environmental issues and practical work with the recovery and recycling of building and demolition waste as a form of vocational development. Application of the suggested model revealed the overall effects on sustainability of different methods of waste management. In addition, negative aspects of the systems analysed were identified, which led to discussions about possible improved practices within the waste management systems. Two of the waste management systems investigated (the recycling of steel and re-use of sanitary porcelain) showed a potential contribution to sustainable development in all of the aspects studied. Preparing bricks for re-use showed the largest potential for eco-efficiency, but had negative effects on sustainability from the social perspective of health and the working environment. The possibility of further use of the model and the remaining obstacles to such analyses are discussed. One observation is that the data collection needed to perform this kind of sustainability analysis is resource-demanding, and that it would therefore be better to identify a smaller number of key indicators.     

Processing and Characterization of Short-Fiber Reinforced Jute/Poly Butylene Succinate Biodegradable Composites: The Effect of Weld-Line

Fabrication of complex injection molded parts often involves the use of multiple gates. In such situations, polymer melts from different gates meld to form the molded part (weld line). This paper reports on the fabrication and characterization of the mechanical and morphological properties of short fiber reinforced jute/poly butylene succinate (PBS) biodegradable composites. The effect of a dual gated mold in the fabrication of welded specimens was a key focus of the investigation. It was observed that incorporation of jute fiber (10 wt%) conferred drastic changes on the stress–strain properties of the matrix as the elongation at break (EB), dropped from 160% in the matrix to just 10% in the composite. The tensile strength of the composite was lower than that of the matrix. However, it is noteworthy that the tensile modulus of the composite increased. Bending test also revealed that both bending strength and modulus increased with the incorporation of jute. Morphological studies of the tensile fracture surface using SEM revealed two types of failure mode. Ductile failure was indicated by plastic deformation at the initiation of fracture followed by brittle failure. The good interfacial bonding indicated between jute and PBS was attributed to positive interaction between the two polar polymers. A comparison of the non-weld and weld-line samples revealed that the weld-line composites have better mechanical integrity than the corresponding polymer matrix with weld line. The results also revealed that elongation at break and toughness are most sensitive to the presence of the weld-line whereas flexural properties are least sensitive.     

恶臭假单胞菌Pseudomonas putida 5-x细胞壁膜系统的Cu2+吸附性能

对1株从电镀废水中分离出的革兰氏阴性菌恶臭假单胞菌P.putida 5-x的细胞表面组分对Cu²⁺的吸附性能进行了分析研究.结果表明,分离的P.putida 5-x细胞壁膜的Cu²⁺吸附容量是完整细胞的5倍之多.细胞表面组分如肽聚糖层、细胞外膜和细胞内膜在P.putida 5-x细胞壁膜的Cu²⁺吸附过程中都发挥了作用.肽聚糖层、细胞外膜和内膜在P.putida 5-x细胞壁膜中的含量依次为细胞内膜>外膜>肽聚糖层,而它们的Cu²⁺吸附容量的大小依次为肽聚糖层>外膜>内膜.在P.putida 5-x细胞壁膜对Cu²⁺的吸附过程中,肽聚糖层贡献了不到15%的吸附容量,而细胞外膜和内膜分别贡献了30%～35%和25%～30%.P.putida 5-x细胞外膜中的磷脂含量明显比其它报道的革兰氏阴性细菌的细胞外膜高,这可能是P.putida 5-x细胞外膜具有较高Cu²⁺吸附容量的主要原因,并由此导致P.putida 5-x细胞壁膜的高Cu2+吸附容量.     

潜流湿地处理生活污水时的强化策略

研究在潜流湿地处理生活污水时通过预处理强化、介质优化和工艺改进克服现有技术缺陷的可行性.改进方法包括化学强化预处理、预曝气、添加氮吸附介质、添加磷吸附介质、湿地高浸润线、中浸润线、低浸润线和动态浸润线运行.结果表明,化学强化预处理不仅可以除磷,而且削减湿地污染负荷可使后续湿地面积减小63%,但是不能有效脱氮.预曝气仅使氨氮去除率提高了1%.添加氮吸附介质的有效时间短,运行前3个月对NH₄⁺-N去除率为84%,5个月后下降到64%.添加磷吸附介质的有效时间较长,可维持数年.因此,脱氮过程只有通过基质微生物实现.稳态浸润线下对COD、NH₄⁺-N、TN、TP的去除率,高浸润线湿地为50%、21%、32%、-26%;中浸润线湿地为53%、48%、48%、-14%;低浸润线湿地为74%、96%、35%、22%.提出动态浸润线及序批式潜流人工湿地工艺(CBSW),其对COD、NH₄⁺-N、TN、TP去除率为67%、62%、53%、33%.CBSW实现了单级湿地内好氧/缺氧环境的交替出现,提高了脱氮能力,除污综合表现最佳.     

Joint analysis of process and operator performance in chemical process operational safety

Independent studies of case histories by the Health and Safety Commission in the UK and by a Honeywell led industrial consortium world-wide showed that human errors represent the major cause of failure in process plant operation. In contrast to this discovery the majority of previous studies on computer aided systems for fault detection and diagnosis has focused on the process side. This paper presents a methodology, which can involve human factors into the development of systems for automatic identification and diagnosis of abnormal operations and develops methods and techniques that can be used to simultaneously capture, characterise and assess the performance of operators as well as of the process. A joint process–operator simulation platform is developed which is used as a test-bed for carrying out the study. The process part is a simulator, which simulates in high fidelity the dynamic behaviour of the process that is subject to the influence of various disturbances and operators’ interventions. The operator module is developed as a real-time expert system, which emulates operator’s behaviour in interpretation of received signals, and planning and execution of decisions. The interaction between the two modules is managed through an interaction module, which handles the real-time exchange of data using Dynamic Data Exchange. The interaction module also contains the toolkits for analysing the dynamic behaviour of the joint process–operator system. The method and system are illustrated using a simulated case study.     

脉动风速功率谱与随机Fourier幅值谱的关系研究

功率谱密度函数是随机过程在频域内的重要特征量,但由于其本质上是平稳过程的频域数值特征,致使其很难全面反映原始随机过程的概率信息,这就需要从更本源的意义上考察随机过程。本文试图从Fourier随机函数的角度反映随机过程,将经典的功率谱密度函数中具有物理意义的可测变量看作随机变量,利用功率谱与Fourier幅值谱的关系,定义了随机Fourier幅值谱;以Davenport谱为例,证实当地面粗糙度服从对数正态分布、10m高度基本风速服从极值Ⅰ型分布时,可通过功率谱构造具有物理意义的随机Fourier幅值谱。通过实测风速Fourier谱与随机Fourier幅值谱的比较,证明随机Fourier幅值谱的概念具有合理性。     

超声波探伤技术中的波高百分比法的认识

对波高百分比探伤方法的认识,本文将该方法的基本理论、标准规定波幅关系以及在超声探伤中该方法的技术做一概略介绍。     

超低空航拍技术在输变电环评工作中的应用研究

分析了环评工作中收集的影像资料存在的问题，提出了超低空航拍的解决方法。通过对比分析，选择了多旋翼无人机作为超低空航拍平台。该设备具有携带方便，飞行稳性的优点。从实际应用效果来看，基于该技术获得的影像信息含量全面、工作效率高、评价结果更客观可信，为提高环评工作质量提供了一个可靠的技术方案。     

冷空气在北上台风“利奇马”致灾暴雨中的作用分析

利用NCEP逐6 h再分析资料、地面加密观测、探空、雷达资料,分析得出“利奇马”致灾暴雨是在长时间稳定维持的天气尺度环流背景下形成的。冷空气在降水所起的作用表现在:(1)长时间维持的弱冷空气与偏南暖湿气流交汇形成了边界层辐合线,辐射升温和暖湿气流的输送加大了辐合线两侧的温度和露点梯度,在高温高湿的有利环境下,对流在辐合线附近强烈发展。(2)高空槽后冷空气由“利奇马”环流西北侧渗入,先后形成3个冷平流中心,分别对应3个阶段的降水。(3)冷暖空气在降水区的持续辐合抬升作用增强了降水,最强降水时段发生在锋区垂直方向坡度最大的时段。(4)水平锋生有利于水汽输送和辐合抬升,垂直锋生有利于对流不稳定能量的累积和触发。冷空气形成的水平辐合和抬升造成大范围上升运动,使得锋生和垂直锋消同时存在,最强降水时段发生在水平锋生最强的时段。     

Roads and Landscape Pattern in Northern Wisconsin Based on a Comparison of Four Road Data Sources

Abstract:  Roads are important components of landscapes; they fragment habitat, facilitate invasive species spread, alter hydrology, and influence patterns of land use. Previous research on the ecological impacts of roads may have underestimated their effect because currently available sources of road data do not include the full road network. We compared differences in road density and landscape pattern among U.S. Census Bureau TIGER line files, U.S. Geological Survey 1:100,000-scale digital line graphs, and U.S. Geological Survey 1:24,000-scale digital raster graphics in northern Wisconsin to road data derived from 1:40,000-scale digital orthophotos. Road density measured from digital orthophotos (2.82 km/km²) was significantly greater than that of digital raster graphics (1.62 km/km²) and more than double that of digital line graphs (1.21 km/km²) and TIGER (1.27 km/km²) data. The increased road densities in raster graphics and orthophoto data were mainly due to the addition of minor roads. When all roads were used to define patch boundaries, landscape metrics produced with orthophoto data showed significantly greater levels of fragmentation than those based on line or raster graphics. For example, maximum patch size was 1074 ha and total edge was 109 km for line graphs, compared with 686 ha and 211 km for orthophoto data. Roads are missing in commonly used data, primarily because mapping standards systematically exclude minor roads. These standards are not ecologically based and may result in false assumptions about the ecological effects of roads. We recommend that future studies take special consideration of the completeness of road data and consider whether all ecologically relevant roads are included.