强冲击荷载作用下加无粘结预应力筋格栅坝动力响应分析

泥石流拦挡坝主要以增加自身刚度来提高其拦挡能力,但对于巨石块的碰撞,坝体刚度越大,其受冲击力也越大,相应的坝体结构破坏也越大。创新性地将无粘结预应力筋设置在普通格栅坝中,利用ABAQUS软件对普通格栅坝和加无粘结预应力筋格栅坝在相同冲击条件下(以10m/s的冲击速度)坝体被撞后动能的变化、加速度响应值、位移值和Von-mises应力进行了有限元数值模拟计算与对比分析。结果表明:加无粘结预应力筋格栅坝比普通格栅坝能吸收更多的冲击能量,冲击方向的加速度响应值更小,具有更好的抗冲击性能。     

酸雨对混凝土建筑物和文物损坏机理的研究

介绍了酸雨对混凝土建筑物和文物损坏机理的宏观分析,水泥中加入少量石膏,可延缓凝结时间,但当加入量大,将引起水泥膨胀,以致溃裂,探讨了酸雨对混凝土建筑物与文物损坏的微观分析,特别是酸雨等生成各种硫酸盐,通过从化学反应原理上分析了酸雨中二氧化硫与混凝土中钙离子反应生成石膏机理,从石膏特性上探讨了酸雨对混凝土建筑物和文物侵蚀机制,并由此提出了酸雨条件下保护混凝土建筑物和文物应对措施。     

MODELING A CONCRETE BLOCK IRRIGATION DIVERSION SYSTEM1

ABSTRACT: Concrete block irrigation diversion systems have been proposed as alternatives to permanent dams of concrete or rock or temporary gravel berms. Permanent dams can cause stream channel instability, bank erosion, sediment pollution, ice flow blockage, and safety problems for recreational floating craft. Temporary berms can require substantial streambed disturbance and can promote sediment pollution, stream bank instability, and bank erosion. A design procedure was developed based on a model of the hydraulic performance of concrete block diversion systems. The procedure was used to model a site on the Gallatin River in Montana. The method relies on HEC-RAS (Hydrologic Engineering Center -River Analysis System) software combined with analytical techniques in an iterative scheme. The hydraulic performance of different diversion configurations (the existing heavy-rock diversion system, concrete blocks oriented parallel to flow, and concrete blocks oriented diagonally) was assessed using the model under a range of flow rates. The minimum diversion dimensions (length, number, and size of blocks) that maintained block stability while diverting the requisite flow were determined for each model run. At the Gallatin River site, the block system oriented parallel to flow required less diversion material than the diagonal orientation. The recommended diversion length was 51.8 m (170 ft). Trapezoidal blocks with a top width of 20.3 cm (8 in), a height of 45.7 cm (18 in), and side slopes of 2 vertical to 1 horizontal were specified. This configuration minimizes the total block mass, diverts the required flow, and has a factor of safety of 2.0 against block displacement.     

Identification of non-value adding (NVA) activities in precast concrete installation sites to achieve low-carbon installation

The lean production philosophy has been applied in the construction industry to reduce waste and increase efficiency. It is until recently that the lean philosophy has proven to be effective to meet the challenges of sustainable development. Many studies have shown that lean philosophy can be applied in precast concrete factories to lower inventory, reduce waste and increase efficiency. However, the precast concrete installation cycle should not be overlooked following a life cycle perspective. This study adopts a weighted factor model comprising 30 contractors in the Singapore construction industry and a case study. Construction site layout management practices are investigated using the weighted factor model. Strategies to improve the construction site layout are presented in a case study. The results indicated that there are many non-value adding activities in the site layout management practices that contribute to an increase in the carbon emissions level. Little consideration of green building materials, improper specifications of the precast concrete products, lack of an uninterrupted workflow, and inaccurate estimation of seem to be the most important ones. The results provide good practice guidance and can be used as a checklist for contractors to identify the NVA activities in the installation sites to achieve low-carbon installation. The results will also be useful for regulatory agencies to provide recommendations for contractors to improve the installation procedure and reduce carbon emissions.     

Non-point source analysis of a railway bridge area using statistical method：Case study of a concrete road-bed

In an effort to protect the quality of the water system, interest in non-point source pollution is increasing. Recently, studies of non-point sources pollution are continuing in relation to various land- use areas, but such studies have not been fully conducted in railway facility sites. Using monitoring data of railway bridge area with concrete road-bed, the runoff characteristics, pollutant unit loads, and first flush criteria were assessed. Railway bridge area with concrete road-bed typically show the first flush effect, and the pollutant unit load was determined to be higher than other public facilities areas. Further, the first flush criteria show an effective rainfall amount of 7 mm. In other words, from the runoff of railway facilities, considerable amounts of non-point source pollutants are occurred, indicating the need to create best management practices which are adequate for railway facility sites.     

海洋混凝土结构表面防护涂料环境适应性评价研究进展

综述了岛礁混凝土结构表面防护涂料海洋环境适应性评价（老化）研究进展,对表面防护涂料海洋环境适应性评价中试验设计、控制因子设定、试验方法选择、评价指标确定等环节中存在的问题进行了讨论,认为只有在认真梳理单环境因子对涂料作用机理的基础上,对它们进行合理设定,才能有效提高加速试验结果和自然暴晒老化试验结果的相关性。     

极端降雨条件下透水水泥混凝土路面削流除污试验研究

通过试验,对极端降雨条件下透水水泥混凝土路面在削减洪峰流量、径流总量以及去除污染物的效果进行研究。试验表明,在降雨历时60 min,降雨量为110,135,163 mm的情况下,透水水泥混凝土路面削减径流总量为55%~69%,削减洪峰流量为55%~63%;对SS、COD、TN、TP的去除率分别为82%~95%、58%~78%、31%~74%、59%~80%。结果表明,在极端降雨情况下,透水水泥混凝土路面在削流除污方面的效果较好,且与一般降雨条件下的除污效果相近,因此在暴雨情况下,也可产生较好的环境效益,表明其具有气候普适性,是一种良好的海绵城市建设技术。     

某桥墩承台病害分析与处理

桥墩病害的正确分析处理,事关桥梁的安危。介绍了某桥墩承台病害,分析了产生病害的主要原因是混凝土碱骨料反应。据碱骨料反应产生的条件,提出了桥墩承台病害采用优料加大截面隔绝法的处理方案,经由实施,使桥梁重获新生。所提桥墩承台病害处理方案正确,处理效果良好,对类似桥墩的分析处理具借鉴意义。     

爆炸荷载作用下方钢管混凝土柱的动力响应及破坏机理

方钢管混凝土柱是被广泛采用的组合构件之一.爆炸发生时产生的爆炸冲击波可能会对框架结构内部的方钢管混凝土拄造成严重破坏,然而目前对其动力响应及破坏机理的研究成果相对较少.本文采用有限元分析软件ANSYS/LS-DYNA对爆炸荷载作用下方钢管混凝土柱的动力响应和破坏机理进行了研究分析.建立了方钢管混凝土拄实体有限元模型,其...     

建筑垃圾再生骨料生产工艺及应用研究

采用进口移动式破碎-磁选-筛分设备,将混凝土类建筑垃圾加工成再生骨料,并掺入制备混凝土、干混砂浆、道路无机混合料。检测结果表明,再生制品性能可满足使用要求,再生骨料替代天然骨料比例可达到50%以上。