燃煤锅炉低温烟气余热利用探讨

针对燃煤锅炉燃烧产生的低温烟气仍具有一定温度的现象,提出通过增设超导热管空气预热器对这部分低温烟气余热加以回收的设想,对锅炉送风进行预热,探讨烟气余热利用可达到的送风温度、节能效果及可能产生的经济效益。     

Determination of turbulent burning velocities of dust air mixtures with the open tube method

Correlating turbulent burning velocity to turbulence intensity and basic flame parameters-like laminar burning velocity for dust air mixtures is not only a scientific challenge but also of practical importance for the modelling of dust flame propagation in industrial facilities and choice of adequate safety strategy. The open tube method has been implemented to measure laminar and turbulent burning velocities at laboratory scale for turbulence intensities in the range of a few m/s. Special care has been given to the experimental technique so that a direct access to the desired parameters was possible minimising interpretation difficulties. In particular, the flame is propagating freely, the flame velocity is directly accessible by visualisation and the turbulence intensity is measured at the flame front during flame propagation with special aerodynamic probes. In the present paper, those achievements are briefly recalled. In addition, a complete set of experiments for diametrically opposed dusts, starch and aluminium, has been performed and is presented hereafter. The experimental data, measured for potato dust air mixtures seem to be in accordance with the Bray Gülder model in the range of 1.5 m/s<u′<3.5 m/s. For a further confirmation, the measurement range has been extended to lower levels of turbulence of u′<1.5 m/s. This could be achieved by changing the mode of preparation of the dust air mixture. In former tests, the particles have been injected into the tube from a pressurised dust reservoir; for the lower turbulence range, the particles have been inserted into the tube from above by means of a sieve–riddler system, and the turbulence generated from the pressurised gas reservoir as before. For higher levels of turbulence, aluminium air mixtures have been investigated using the particle injection mode with pressurised dust reservoir. Due to high burning rates much higher flame speeds than for potato dusts of up to 23 m/s have been obtained.     

Health risks of residential wood heat

The resurgence in the use of wood in the United States for residential heating has been accompanied by a dramatic increase in deaths and injuries from residential fires. Toxic materials present in woodsmoke also appear to present a significant public health hazard. As a result of these factors, production of residential wood heat can be up to two orders of magnitude more hazardous than generation of an equivalent amount of electric energy at a coal-fired power plant. Proper care in installation and operation of wood stoves, as well as technological innovations that control wood-stove emissions, can greatly reduce the health and safety hazards of residential heating with wood.     

高效喷淋泡沫脱硫技术及装置的应用

SO2是产生酸雨的主要气体,其主要来源于工业燃煤锅炉.以沈阳一家电厂为例,该厂选用新型高效的喷淋泡沫脱硫除尘器对锅炉排放的SO2进行治理.进入喷淋泡沫塔前的SO2平均浓度为2780 mg/m3,经脱硫后出塔平均浓度为289.3 mg/m3,去除率为89.6%.结果表明,这种有别于传统湿法的新型高效的喷淋泡沫脱硫技术及装置具有脱硫效率高、装置占地少、运行稳定、沉淀物易于回收利用等特点,对锅炉排放的SO2进行治理是非常有效的.     

插板对正庚烷油池火燃烧行为的影响研究

海上石油泄漏常规的处理方法是原位燃烧,加速其燃烧并使其燃尽是降低其对生态环境影响的重要措施之一。以正庚烷为燃料,在油池内插入竖直铝板,研究不同高度铝板对池火燃烧行为的影响。结果表明,插板对池火燃烧速率以及火焰高度具有明显的增强作用,随着板的高度的增加,增强作用先增大后减小,当H_p/D(板高与油池直径之比)为3.5时,增强作用最大。火焰高度、板的温度、热通量以及燃烧速率的变化趋势一致,它们的临界点均在H_p/D=3.5附近。插板后燃烧速率增大主要是因为插板自身的热传导导致了燃料的核态沸腾,使燃料接受的热反馈增大,从而加快了燃料的蒸发,增大了燃烧速率。     

基于神经网络的东北地区秸秆焚烧预测

选取农作物秸秆露天燃烧严重的东北地区,采用人工神经网络的方法,结合卫星火点和气象数据,开展秸秆露天燃烧预测研究.结果表明：人工神经网络预测模型成功验证了松嫩平原地区2015年10月25日~11月15日的秸秆露天燃烧情况,其准确度为67.1%,经过多次试验,在神经网络建模与验证数据配比为80：20时,预测准确度最高,可达69.7%,同时该模型的稳定性较好.而对不同区域,不同时间段的预测研究表明,人工神经网络较适用于长时间序列的预测.就影响因素而言,相对湿度是影响秸秆露天燃烧的最重要因素.本研究结果可为空气质量模式提供火点预测数据,提高其预报预警能力,为区域联防联控政策的制定提供科技支持.     

东南亚生物质燃烧输送影响我国西南气溶胶辐射特性研究

利用2013年地基CE-318太阳光度计观测数据,结合中分辨率成像光谱仪(MODIS)遥感产品和HYSPLIT后向轨迹分析,研究了一次东南亚生物质燃烧污染长距离输送至中国西南昆明站点过程(2013年4月5⁸日)中,气溶胶光学特性和辐射特性的变化及其可能来源.结果表明,此次污染过程期间,我国西南地区生物质燃烧活动较少,而中南半岛地区生物质燃烧活动显著.4月5⁷日,昆明站点气溶胶光学厚度(AOD)升高,消光波长指数(EAE)和吸收波长指数(AAE)均增大.此外,依据EAE和AAE分类方法,5⁶日昆明站点以城市工业气溶胶为主,7⁸日以生物质燃烧气溶胶为主,其细模态峰值半径(0.11μm)小于5⁶日(0.15μm),7日细模态粒子体积浓度峰值(约为0.16μm 3/μm 2)是5日的2倍.气溶胶直接辐射强迫(ARF)日变化结果表明4月7日气溶胶对地表的降温效应达到最大,对大气的加热作用最强.气溶胶直接辐射强迫效率值(ARFE)的变化表明生物质燃烧气溶胶对大气顶的降温作用减弱.MODIS...     

Influence of rice straw burning on the levels of polycyclic aromatic hydrocarbons in agricultural county, Taiwan

.     

Production of boundary layer ozone from tropical American Savannah biomass burning emissions

Boundary layer ozone and carbon monoxide were measured at a savannah site in the Orinoco river basin, during the dry and wet seasons. CO and O₃ concentrations recorded around noontime show a good linear correlation, suggesting that the higher ozone levels observed during the dry season are photochemically produced during the oxidation of reactive hydrocarbons in the presence of NO_x both emitted by biomass burning. The rate of photochemical ozone production in the boundary layer ozone by biomass burning calculated from the production ratio ΔO₃/ΔCO (0.17±0.01 v : v) and the amount of CO produced by fires (0.26–1.3 mole m⁻² dry season⁻¹), ranges from 0.6 to 2.6 ppbv h⁻¹ for 8 h of daylight. This O₃ production rate is in fairly good agreement with the value derived from RO₂ radical measurements made in the Venezuelan savannah during the dry season. The net boundary layer production of O₃ from all tropical America savannah fires is estimated to range between 0.28 and 0.36 Tmol O₃ per year, which is about 3 times higher than the O₃ produced from pollution sources in the eastern United States during the summer. An extrapolation to all of the world's savannah would indicate a net boundary layer ozone production of about 1.2 Tmol yr⁻¹. This is discussed in the context of the overall global budget of tropospheric ozone.