Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Pressure- volume- temperature relationships of soy protein isolate/starch plastic

The use of pressure-volume-temperature (PVT) studies in processing of a biodegradable plastic composition made from soy protein isolate and corn starch is described. The ability of PVT measurements to predict the combined effects of pressure, volume, and temperature effects is demonstrated. The results show that the PVT relations of the plastic can be predicted by using a regression analysis similar to the Tait equations of state. A change in slope of the PVT curves was observed at around 80‡C, which is ascribed to the glass-transition process of the plastic. Evidence of onset of thermal degradation of the plastic was observed at ca. 160‡C under 0 to 200 MPa isobaric pressure. This thermal degradation precluded determination of the crystal melting point of the plastic.     

Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.     

The New Jersey Toxics Reduction Workplan for Ny-Nj Harbor: Distribution of Pcdd/Fs in Ambient Waters

As part of the NJ Toxics Reduction Workplan for NY-NJ Harbor, ambient water samples were collected at fifteen locations along the tidal portions of the Hackensack, Passaic, Raritan, Rahway and Elizabeth Rivers, and in Newark Bay, the Arthur Kill, and Kill van Kull. A Trace Organics Platform Sampler was used to collect a total of 75 suspended sediment phase samples between June 2000 and May 2002. These samples were analyzed for spatial and wet vs. dry weather trends in the 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs; modified USEPA Method 1613b). Mean total PCDD/F (tPCDD/F) concentrations at the sampling locations ranged between 3.8 and 41.5 ng/g. On average, OCDD accounted for almost 80% of the tPCDD/F concentrations; mean total [PCDD/F – OCDD] concentrations ranged between 0.84 and 5.20 ng/g at the sampling locations. Mean 2,3,7,8-TCDD concentrations ranged between 0.003 and 0.28 ng/g, with the highest concentrations (> 0.10 ng/g) along the tidal Passaic and lower Hackensack Rivers, and in upper Newark Bay. Mean tPCDD/F Toxic Equivalency Quotients (TEQ) ranged between 45 and 344 TEQ pg/g, with the highest levels found in the lower Passaic River. Toxicity was primarily driven by 2,3,7,8-TCDD concentrations in the Passaic and Hackensack Rivers, and in Newark Bay. Examples of congener distribution patterns at some of the sampling locations are also presented.     

英语写作中Chinglish的成因分析

在母语环境中学习外语的过程始终存在母语的干扰。针对大学英语写作中出现的Chinglish——中式英语的现象，从皮亚杰的发生认识论、母语负迁移及中西思维模式差异等方面分析了中式英语的成因。揭示其成因对于大学英语教师改进写作教学具有重要意义，从而更好地帮助学生用英语思维模式写出地道的英文。     

安全科技英语专业设置的可行性探索与研究

国家十分重视安全生产,安全生产已成为国家“十一五”规划的重要内容之一。如何适应安全科技教育发展的新机遇是安全教育工作者所关注的重要课题。笔者通过调查研究,在分析安全科技英语专业设置的必要性和重要意义的基础上,提出了安全科技英语专业人才的培养模式,构建了安全科技英语专业课程体系的基本框架,并就安全科技英语专业特色进行了研究和探索,指出了安全科技英语专业设置应注意的若干问题。     

在役化工装置安全评价模式的研究

根据在役装置安全评价的两类目的,分析现有在役化工装置安全评价模式中存在的不足;提出在役化工装置安全评价的一个新思路和新模式;给出了基于新模式的安全评价程序,并对该评价程序各个步骤及采用的评价方法组合进行了较为详细的讨论,其关键是建立评价指标体系。该评价模式既能查找出装置中存在的具体安全隐患,也能给出装置总的安全评价结论。同时指出,安全评价指标体系的建立和完善应成为安全管理的一项标准化、基础性工作。该评价模式的思路不仅适用于在役化工装置的安全评价,也适用于其他系统安全现状评价,是对进一步完善当前安全现状评价工作的一个有益尝试。     

地铁运营系统安全综合评价指标体系研究

分析地铁运营系统的特点、运营模式、系统故障模式,并运用系统工程的理论原则,从系统外部因素、系统指挥因素、设备设施因素、运营管理因素4个方面,确立地铁运营系统安全综合评价指标体系,利用模糊数学综合评价法,建立了地铁运营系统安全综合评价模型,并通过典型实例进行综合分析评价,进而证明将模糊数学理论应用于地铁安全综合评价的可行性。通过地铁运营系统安全指标体系和评价方法的研究和探索,对正确评价地铁系统运营安全现状,修正偏差,提高地铁系统安全总体水平具有十分重要的意义。     

人机显示/控制界面适配性综合评价指标和评价方法

通过对驾驶舱人机显示 /控制界面适配性指标影响因素、视觉信息流工效的测定与评估方法的研究 ,建立了一套视觉信息流工效综合评估系统研究体系 ;研究的初步结果主要有 ,飞机驾驶员视域中存在最佳、较好、极限工效区 ,并且振动、反射眩光、噪声、显示字符的形状 /颜色特征 /对比度 /显示方式等是影响信息获取工效的主要因素 ;飞机驾驶舱显示布局及显示方式应符合视觉工效学设计原则。     

基于C/S与B/S混合模式的大气污染监测系统设计

以C／S与B／S混合模式为基础的大气监测系统、既能充分发挥网络资源的便捷化，实现企业监测数据与管理系统的快速链接，又充分利用C／S模式的安全性能，以保证系统的安全性。因而此系统是当前的一种较新型的，功能较为强大的网络监测系统。