Evaluation of ecological restoration success in mining‐degraded lands

This review article analyzes the importance of assessing the success of ecological restoration by using four indicators: assemblage of the plant and animal communities; enzyme activity; litter accumulation and decomposition; and the improvement of soil quality. These indicators can be used alone or in combinations. Even though the Society for Ecological Restoration International provided a primer containing nine attributes to use as standards for measuring ecological restoration, only three of these attributes could be easily applied due to their low costs and low time requirements. These three attributes include: diversity, vegetation structure, and ecological processes. This review article emphasizes that the criteria for the selection of the indicator species should be based upon: habitat types, abundance of species, ease of measuring, quantifying and interpreting the results, gradual enhancement with time and cost‐effectiveness, sensitivity, variability of response, size, residential status, and requirements of the area. Principal component analysis was applied to calculate the reclaimed mine soil quality index (RMSQI) and the forest soil quality index (FSQI) and the RMSQI value was compared with FSQI (optimum index value of reference ecosystem) to evaluate the restoration success. Available phosphorus, exchangeable magnesium, organic carbon, clay content, field moisture, available nitrogen, electrical conductivity, and pH are identified as the most influential parameters that regulate the health of reclaimed mine soil. Exchangeable calcium, magnesium, cation exchange capacity, sand, silt, clay content, field moisture, available phosphorus, and pH are the controlling properties for forest soil. The observed values of the above‐stated soil indicator properties were converted into a unitless score (0–1.00) and integrated into index calculations (RMSQI and FSQI). The contribution of each soil indicator properties on the calculated index was analyzed, which provides insight into the reason for the measured index. A higher RMSQI indicates better ecological restoration success. The calculated RMSQI was found to be 0.473 in the reclaimed dump, which is 6% lower than the reference ecosystem.     

Effects of tectonic stress environment on tectonophysical features of deformed coal

To study the effects of the tectonic stress environment on the tectonophysical features of deformed coal, No.8 Mine in the Pingdingshan mine area is used as a study area and the relationship between the development of deformed coal, distribution of fractures, formation of deformed coal and tectonic stress environment are analyzed. The results indicate that the thickness of the bedrock layer should be included in the analysis of the tectonic stress environment for a region of intense tectonic activity. Although the reverse faulting stress regime can control the development of deformed coal, the C seam is extremely sensitive to the stress regime. The most advantageous direction of the deformed coal fractures is consistent with the regional maximum principal stress, and the development of fractures is closely related to the evolution of the tectonic stress environment. The fracture density of the E seam presents a uniform distribution, yet that of the C seam is completely heterogeneous. Superposition and compounding of the tectonic communities evidently increase the fracture density of the deformed coal. There is a relatively apparent boundary between the different types of deformation, which gradually transform from brittle to ductile with a decreasing lateral pressure coefficient. A generalized deformation pattern of the deformed coal is proposed and can be divided into frictional sliding and solid flow.     

行为实验视角下煤矿员工不安全行为路径分析

面对煤矿事故频发现状,立足矿井安全实际生产困难,深入探索矿工不安全行为影响因素。研究表明,煤矿安全事故中,员工不安全行为是导致事故发生的主要原因。通过建立实验平台模拟煤矿员工工作现场,比较不同文化程度的矿工不安全行为发生率以及安全文化教育后矿工不安全行为发生率趋势。对比发现,文化程度越高的员工的不安全行为发生次数不一定越低,且安全文化教育的刺激作用具有保质期。     

井下采煤影响矿区坡面形态及侵蚀的数值模拟分析

针对井下采煤产生的大范围岩移必然最终改变原有地表形态并影响坡面侵蚀特征及规律这一特殊性,从井下与地表相结合的新视角,结合彬长矿区水土流失特征和典型煤矿采矿条件,以采厚、地表坡面坡度等因素为变量,构建了20个不同类型的数值模型,通过数值模拟方法研究并揭示井下采煤对地表坡面形态及侵蚀的影响规律。结果表明,第一,地表坡面坡度会随采厚增加而呈现增大的趋势,且自然坡度越大,坡度变化量越大;相同采厚条件下,坡度增大率与坡面自然坡度整体上呈负相关。第二,地表坡面坡长会随采厚增加而呈现减小的趋势,且自然坡度越小,坡长变化量越大;随采厚增加,地表坡面坡长减小率与自然坡度呈先正相关后负相关的关系,自然坡度为26.57°是拐点。第三,采厚的增加会提高地表坡面产流产沙的强度,加剧坡面侵蚀,这种效应在坡度较小的坡面更加显著;井下采煤引起地表坡面坡度的增大是产生这一规律的主因。     

煤矸石堆场Fe、Mn迁移累积效应研究

通过对贵州织金典型煤矿区矸石堆场周边地表水体及耕地进行调查与采样分析,探讨了煤矸石堆场Fe、Mn元素迁移对周边地表水体及耕地累积效应的影响。研究结果表明:受煤矸石堆场酸性排水的影响,煤矸石堆场周边溪沟水Fe、Mn含量分别达0.81~32.14mg/L、1.17~8.42mg/L,超过"集中式生活饮用水地表水源地标准"限值的3~107、12~84倍。堆场周边旱作土中Fe、Mn含量分别达63 530~85 990mg/kg、243.1~910.1mg/kg,水稻土达46 940~75 810mg/kg、144.5~409.1mg/kg,Fe、Mn累积指数旱作土分别达1.61、2.97,水稻土分别达1.24、1.33。随着与堆场距离的增大,水稻土Fe、Mn含量逐步降低,在500m范围内Fe降低了35%,Mn降低了61%,而旱作土变化规律不明显。     

煤炭开采对生态系统功能的胁迫作用:模型·实证

为研究煤炭开采对生态系统功能的胁迫作用,基于系统动力学原理构建一般情况下煤炭开采对生态系统功能胁迫作用的系统动力学模型,分析不同情境下煤炭开采对生态系统功能的胁迫作用特征,并以淮河流域典型煤炭资源型城市——淮南市为例进行实证研究. 结果表明:煤炭开采对生态系统功能有胁迫作用,政府是重要影响因素;不同情境下煤炭开采对生态系统功能的胁迫作用不同,表现为情境一(理想状态)<情境二(良性状态)<情境三(一般状态)<情境四(停滞状态)<情境五(糟糕状态);生态治理投资系数和煤炭开采技术投资系数的比值越大,则煤炭开采对生态系统功能的胁迫作用越小. 实证结果通过有效性检验,表明该研究建立的系统动力学模型具有可靠性. 当前淮南市生态治理投资和煤炭开采技术投资的比值为0.511,表明淮南市生态系统功能系统和煤炭开采系统处于一般状态. 研究显示,政府在维持生态系统功能稳态中发挥着一定作用. 煤炭开采对生态系统功能的胁迫作用特征:当生态治理投资系数和煤炭开采技术投资系数的比值为0时,生态系统功能系统和煤炭开采系统处于糟糕状态;当比值为(0,1)时,处于一般状态;当比值为1时,处于良性状态;当比值大于1时,两大系统进入理想状态.      

粉煤灰-铝土矿改性制备铝铁复合混凝剂的除磷性能及混凝机理研究

化学混凝法是城市污水处理深度除磷的有效方法,目前常用混凝剂主要存在成本高、除磷效率低且用量大等缺点.本研究采用常压酸浸法,以低成本的铝土矿和粉煤灰为主要原料制备无机复合混凝剂,并对其进行除磷应用及机理研究,结果表明:1自制混凝剂对生活污水中TP去除率达99.58%,出水TP含量为0.012 mg·L-1,优于GB18918—2002一级A标准.2 X-射线衍射和红外光谱结果显示,混凝剂中的Fe—OH、Al—OH、H—OH等基团能与水中的磷酸根作用生成沉淀达到除磷目的,该沉淀在沉降过程中还能吸附不易沉淀的含磷悬浮物,发挥网捕卷扫作用.3采用Ferron逐时络合比色法分析铝铁形态结果显示,混凝剂含有64.14%低聚态铝铁,能中和水中胶体的表面电荷致使胶体脱稳;11.27%中聚态铝铁可吸附在胶体表面,降低其表面电荷,同时以较高的分子量发挥吸附架桥作用;24.59%高聚态铝铁在沉淀过程中可包夹部分胶体粒子,以较大表面积发挥卷扫作用.4分形维数研究结果显示,絮体分形维数在1.2~2.8之间,分形特征较好,能有效发挥絮体的吸附架桥作用.5 Zeta电位分析结果显示,混凝剂本身带正电荷,能与水中带负电荷的胶体物质发生中和,从而压缩双电子层,使胶体粒子脱稳而从水中去除.混凝剂除磷过程是压缩双电层、电中和、吸附架桥和网捕卷扫多种机制共同作用的动态变化过程.     

取暖锅炉耗煤量核定方法探讨

利用采暖建筑所需的理论热负荷值,对单一取暖锅炉单位供暖面积所需耗煤量进行估算,通过估算出的耗煤量,结合国家现有的煤种、治理装置脱硫、除尘效率等参数,可以计算出燃煤锅炉单位取暖面积主要污染物排放量,为排污收费提供科学的依据。     

沈阳市煤炭行业大气污染物排放调查及污染当量数核算

通过对沈阳市具有代表性的几家煤矿企业废气污染物排放状况的监测研究,由此核算该行业主要大气污染物产生量,各污染因子的污染当量数,并确定了生产单位产品时产生的废气排污费征收额度,为大气污染物排放总量的控制管理提供技术依据。     

石煤提钒工艺及焙烧设备的清洁性评价

我国已颁布了56个重点行业的清洁生产标准,从生产工艺与设备要求及资源能源利用指标等6个方面规定了清洁生产考核的定量或定性指标要求.本文针对尚无清洁生产标准可供参考的陕西省从石煤中提取V<,2>O<,5>的生产企业,从生产工艺及设备的角度出发,按照石煤提钒的工艺流程逐项对生产工艺以及其中的焙烧设备进行清洁性比对,最终得出...