飞灰颗粒物介导活性氧氧化损伤与金属离子浸取浓度的关系研究

本文利用脱氧核糖氧化法考察了飞灰颗粒物氧化能力与络合剂及盐酸浸取颗粒物上金属浓度的关系。结果表明,代表氧化损伤程度指标的脱氧核糖氧化物,通过硫代巴比妥酸似丙二醛加合物显色反应,其吸光度值与飞灰颗粒物被浸取剂盐酸及氨三乙酸作用后的金属离子铁、锌、镉、铅和锰的浓度显著相关。基于铁在自然环境中的高含量及在活性氧催化反应中的特殊性,本文认为二乙三氨五乙酸、乙二胺四乙酸及柠檬酸浸取液中的金属浓度不能很好地表     

催化燃烧法处理聚酯工艺废气的实践

探索研究使用催化燃烧方法处理聚酯生产工艺废气的可行性，并在生产装置上进行了中试。试验结果证明，使用催化燃烧法处理效果好，不产生二次污染，处理后的废气可达标排放。     

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO₂, Ce_0.92Zr_0.08O₂, and Ce_0.84Zr_0.16O₂ composed of 5–6 nm crystallites display T_m-CO2 (the temperature at maximum CO₂ yield) at 383, 355, and 375°C under 10 vol.% O₂/N₂, respectively. The size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O₂^? and O^?) for soot oxidation. Thus, the activities of Ce_0.92Zr_0.08O₂ and Ce_0.84Zr_0.16O₂ in soot combustion are better than that of CeO₂. Although oxygen vacancies promote the migration of lattice O^2?, the enriched surface Zr also inhibits the mobility of lattice O^2?. Therefore, the T_m-CO2 of Ce_0.84Zr_0.16O₂ is higher than that of Ce_0.92Zr_0.08O₂. Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.     

Emission control for precursors causing acid rain (V): Improvement of acid soil with the bio-briquette combustion ash

The bio-briquette technique which mixes coal, biomass and sulfur fixation agent and bio-briquettes under 3-5 t/cm^2 line pressure has aroused people‘s attention in view of controlling the air pollution and the acid rain. In this paper, the physicochemical properties of bio-briquette and its ash were investigated. And the acid soil was improved by the bio-briquette combustion ash, which contained nutritive substances such as P, N, K and had the acid-neutralizing capacity(ANC). The pH, EC, effective nutrient elements(Ca, Mg, K, P and N), heavy metal elements(AI, Cu, Cd, Cr, Zn and Mn) and acid-neutralizing capacity change of ash-added soils within the range of 0-10%, were also studied. Specially, when 5% bio-briquette combustion ash was added to the tested soil, the content of the effective elements such as Ca, Mg and K rose by 100 times, ? times and twice, respectively. The total nitrogen also increased by about twice. The results showed the oxyanions such as that of AI, Cu, Cd, Cr, Zn and Mn were not potentially dangerous, because they were about the same as the averages of them in Chinese soil. It is shown that the ANC became stronger, though the ANC hardly increases in the ash-added soil. On the basis of the evaluation indices, it is concluded that the best mixture ratio is to add 2.5%--8% of the bio-briquette combustion ash to the tested soil.     

煤矿巷道瓦斯爆炸传播规律及破坏效应分析

井下瓦斯爆炸的影响因素众多,随机性强,分析和研究瓦斯爆炸的传播规律只有通过巷道模拟实验的方法。通过对爆炸过程中爆炸压力、温度、速度等相关参数随时间、空间的变化规律的分析,进一步研究瓦斯爆炸的机理和破坏效应,在煤矿生产过程中采取合适的阻隔防爆技术措施,减少瓦斯爆炸带来的损失。     

基于统计回归模型的硫化矿石自燃倾向性鉴定指标研究

合理的提出硫化矿石自燃倾向性的鉴定指标,准确鉴别其自燃倾向性,对于矿山防火工作有着重要的意义。本文采用应用非常广泛的一类随机模型—统计回归模型,首先通过分析硫化矿石自燃氧化机理,找到影响硫化矿石自燃倾向性的3个主要影响因素,实验获得相关数据;其次基于3个因素的数据,通过统计分析,建立回归模型,对硫化矿石自燃倾向性进行预测。     

煤炭自燃指标性气体确定的实验研究

矿井火灾是矿井五大灾害之一,煤炭自燃则是矿井火灾最主要的起因。为了了解煤炭氧化、自燃规律,本文采用TG-DSC技术研究了不同煤种在水分蒸发、吸氧增重、受热分解及燃烧等不同氧化阶段的氧化特征值;并采用TG-DSC-GC联用技术研究了不同煤种在整个氧化阶段的气体产物生成规律及其特征。在煤的低温氧化阶段,找出了CO等可作为判别煤自燃的指标性气体及C2H4等辅助指标性气体;并得出了各煤种氧化阶段的耗氧规律。     

生活垃圾填埋场渗滤液处理技术研究

根据处理工艺原理的不同 ,分别介绍生化和物化处理技术、膜处理技术、土地处理技术和蒸发处理技术等处理工艺研究与应用的进展情况 ,同时根据我国填埋场渗滤液的产生特点和处理处置现状 ,展望了我国渗滤液处理工艺的发展趋势。     

蜂窝状Ce/Cr掺杂Cu基催化剂用于乙烷的催化燃烧

以蜂窝堇青石陶瓷为载体,采用浸渍法负载氧化铝涂层和活性组分,制备了蜂窝状Ce/Cr掺杂Cu基催化剂。运用BET,XRD,XPS,H₂-TPR技术对催化剂进行了表征,并对其乙烷催化燃烧活性进行了评价。表征结果显示,Ce/Cr掺杂提高了催化剂表面化学吸附氧的含量,提升了催化剂在较低温度下的氧化还原性能。实验结果表明：在入口乙烷质量浓度2 000 mg/m³、反应空速20 000 h^-1的条件下,Cu-Ce催化剂较Cu催化剂的T₅₀和T₉₀（乙烷转化率为50%和90%时的反应温度）分别降低了46 ℃和101 ℃,降幅高于Cu-Cr催化剂的38 ℃和78 ℃;较高反应空速（30 000 h^-1）对催化反应不利,乙烷浓度对催化剂活性的影响不明显;550 ℃下Cu-Ce催化剂对乙烷的转化率100 h内保持在99%以上,表现出良好的稳定性。     

Ce/Zr系列催化剂上碳颗粒物燃烧行为

分别在TG和TPO上考察了CeO₂,ZrO₂及不同Ce/Zr比的CexZr1-xO₂固溶体催化剂上soot的燃烧性能,同时考察了反应气氛对活性的影响.结果表明:Ce基催化剂能明显降低soot的起燃温度,Ce/Zr比的不同导致Ce_xZr_1-xO₂催化剂性能的差异.反应的速度控制步骤随O₂浓度的不同而改变;H₂O对Ce_0.5Zr_0.5O₂上soot的氧化活性基本没有影响;由于NO氧化产生的NO₂具有更强的的氧化能力,因此NO对soot的燃烧具有促进作用,起燃温度降低了30℃.催化剂上的β氧种参与了soot燃烧过程.