基于力学机制的钢筋混凝土柱抗剪承载力模型∗

为了兼顾钢筋混凝土(RC)柱抗剪承载力分析的计算精度和简便性,研究建立了一种基于力学机制的RC柱抗剪承载力简化模型。首先基于变角桁架-拱模型理论,结合变角桁架模型的力平衡条件以及变角桁架模型和拱模型之间的变形协调条件,建立了RC柱抗剪承载力分析的理论模型;然后利用38组试验数据进行统计分析,分别确定了混凝土、箍筋和拱模型的抗剪承载力贡献系数近似取值,在此基础上建立了R C柱抗剪承载力分析的简化模型;最后通过与试验数据进行对比分析,验证了该模型的计算精度和适用性。分析结果表明,该模型不仅可以合理分析混凝土、箍筋和拱作用的抗剪承载力贡献,具有较高的计算精度,而且计算公式较为简洁。     

基于卫星遥感的广东地区对流层二氧化碳时空变化特征

利用瓦里关全球本底站和番禺气象局地面观测的CO2浓度资料对SCIAMACHY反演得到的对流层CO2产品进行验证.结果显示:SCIAMACHY产品能较好地反映对流层CO2的分布状况,在珠三角地区反演和观测的残差为1.29×10-6,相关系数为0.69,可用于分析区域对流层CO2的时空分布特征.利用2003~2009年SCIAMACHY观测资料分析研究显示:广东地区对流层CO2柱浓度最高值出现在春季,最低值出现在夏季,浓度年均值和年增长率分别为384.84′10-6和1.53′10-6/a,大于全球和我国同期的观测结果;粤东、粤西、粤北和珠三角地区的浓度均在春、冬季显著高于夏季、秋季 ,相同季节内各区域之间的差异不显著;粤西地区CO2柱浓度的年增长率最高,为1.82′10-6/a,珠三角和粤东地区的年增长率相当,分别为1.65,1.64′10-6/a,粤北地区的年增长率最低,为1.61′10-6/a.     

Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

It's a dirty job but someone has to do it: The role of marine benthic macrofauna in organic matter turnover and nutrient recycling to the water column

Benthic macrofaunal populations through their feeding, bioturbation, burrow construction and sediment irrigation activities have profound influences on organic matter inputs to marine sediments (biodeposition) and on the vertical distribution of deposited organic matter within the sediment. These effects in turn influence the rates and pathways of organic matter mineralisation, and element cycles. Similarly, bioturbation, burrow construction and burrow irrigation are major determinants of sediment-water column fluxes of oxygen and nutrients.

In this review, I discuss the influences of the different benthic macrofaunal feeding (functional) groups on mineralisation processes and sediment-water column fluxes of particulate and dissolved nutrients. How these effects influence diagenic processes, the balance between aerobic and anaerobic processes, and the redox status of the surficial sediments. Finally, I discuss some of the limitations of the predominantly laboratory techniques which have been used to study “macrofaunal effects” and how this hinders the inclusion of the effects in quantitative sediment biogeochemical models.     

Transport of Sewage Sludge in a Mixed Water Column

Abstract

Sewage sludge from four publicly-owned treatment works was sampled and characterized in terms of parameters affecting transport at the 106-mile deep ocean disposal site as part of the US Environmental Protection Agency's site monitoring programme. Samples from treatment plants in Passaic Valley, Rahway, and Elizabeth, New Jersey and New York City were characterized in terms of dynamic size distribution, suspended solids and density. the transport characteristics of sludge particles were measured using a 2 metre computer-interfaced laboratory settling column. Experiments were conducted at constant salinity (35 ppt) while varying hydrodynamic mixing, sludge type and concentration using a modified factorial experimental design. Hydrodynamic power dissipation was varied so that the vertical dispersion and rms fluid shear rate ranged between 0-6 cm²S^?1 and 0-30s^?1 respectively. Results indicate that at least 80% of suspended sludge particles will eventually settle under mixed conditions. the average settling velocities ranged between 0.05-4.05 × 10^-3 cm ^s-1. Shear rates above 15 s^?1 inhibited sludge settling due to aggregate breakup and boundary effects, but at a lower shear rate, differential settling and fluid shear were the dominant transport mechanisms. Sludge dilution (1/500-1/5000) had a limited effect on the settling rate. Results from this study can be used to calibrate particle transport models to determine the fate of sludge disposed at an ocean disposal site.     

Spatial distribution of copper in relation to recreational boating in a California shallow-water basin

The overall effect of the number of boats on the copper (Cu) levels in the water column and sediment, along with their spatial variability within Shelter Island Yacht Basin (SIYB), San Diego Bay, California was examined. We identified a horizontal gradient of increasing dissolved Cu and Cu in sediment from outside to the head of SIYB which was coincident with the increasing number of boats. Spatial models of Cu distribution in water and sediment indicated the presence of ‘hotspots’ of Cu concentration. From outside to the head of SIYB, dissolved Cu ranged from 1.3 μ g L^?1 to 14.6 μ g L^?1 in surface water, and 2.0 μ g L^?1 to 10.2 μ g L^?1 in bottom water. Cu in sediment exceeded the Effect Range Low of 34 mg kg^?1 (i.e. where adverse effects to fauna may occur), with a peak concentration of 442 mg kg^?1 at the head of the basin. Free Cu⁺⁺ in surface water was several orders of magnitude higher than in sediment porewater. High-resolution data of Cu species together with probability maps presented in this paper will allow managers to easily visualise and localise areas of impaired quality and to prioritise which areas should be targeted to improve Cu-related conditions.     

砂柱对济南城市屋面雨水径流净化效果的试验

针对屋面雨水回灌裂隙岩溶含水层要求快速量大和水质要求高的特点,设计了相适宜的砂滤柱.采用室内砂滤试验研究了济南市屋面雨水径流回灌裂隙岩溶含水层之前的雨水净化效果.结果表明,砂柱对屋面雨水径流污染物有明显的去除效果,浊度的平均去除率达到87%,悬浮物的平均去除率达到70%以上,对色度、挥发酚、Pb和Zn也有一定的去除效果,对NH3-N、NO2-N的去除效果较差.浊度、色度和悬浮物等大部分污染物的去除主要集中在上层完成,因此,砂柱的上层需要定期更换.     

利用SCIAMACHY遥感资料研究我国NO2柱浓度及其时空分布

利用SCIAMACHYENVISAT 2003—2009年月均观测数据,结合1∶4 000 000行政区划图,得到了近7 a来我国城市级别NO₂柱浓度的时空分布和变化趋势,并采用Seasonal Mann-Kendall非参数检验方法对各城市的变化趋势进行了显著性分析. 结果表明:我国NO₂分布东高西低,NO₂柱浓度高值区主要分布在京津冀及环渤海区域、长江三角洲北部及广东省等地区. 近7 a来我国北部和中部地区的NO₂增长趋势显著,NO₂柱浓度平均值最高和增速最快的前20个城市主要分布在江苏、山东和安徽等省的二级城市郊县和小城市. 与统计年鉴工业废气排放数据的比较表明,工业废气排放与NO₂柱浓度及其时空分布具有较好的一致性. 这种新的NO₂污染格局应该引起重视并采取有针对性的污染监管措施.      

气相色谱法单塔双柱双检测器测定农产品中有机氯与拟除虫菊酯类农药残留应用探索

气相色谱经加装双ECD检测器,实现单塔双柱双检测器测定农产品中有机氯、拟除虫菊酯类农药残留,在不须关机换色谱柱情况下实现双柱定性定量分析。该方法可节约大量定性分析时间,通过百菌清、氯氟氰菊酯、三唑酮、氯氰菊酯的加标回收试验,平均回收率为95.0%～102.5%,相对标准偏差为1.88%～3.72%,方法稳定可靠。     

定水头条件下淄河滩陈化残油淋溶释放试验

淄河滩陈化油污土层是引起大武水源地东部地区地下水污染的主要污染源之一.通过对油污土层采取原状土柱样,在室内进行了模拟淄河滩地存在不同厚度表流时的残油淋溶释放试验.结果表明,在设定的试验条件下,油污土层可淋出水量24.56610⁴m³、油量1185.1kg; 水层厚度对渗出水的油浓度影响不大,渗出油的多少主要决定于渗出水的数量;太河水库放水补源方式对残油释放量的影响不起决定性