H∞ loop-shaping controller design for a grid-connected single-phase photovoltaic system

This paper presents a H_∞ loop-shaping controller for controlling dc-link voltage by regulating the switching signal of the inverter associated with a grid-connected single-phase photovoltaic system. To facilitate a robust control design, state-space realisation of the system model is made with uncertainties represented by linear fractional transformation. The controller is achieved through H_∞ synthesis followed by obtaining desired loop shapes through the choice of the proper weighting functions. The controller order is reduced by Henkel-norm method for facilitating its practical implementation. Controller performance is evaluated through carrying out simulations on MATLAB/Simulink platform under standard and changing atmospheric conditions, and fault condition.     

Automated energy management in distributed electricity systems: An EEPOS approach

The increasing capacity of distributed electricity generation brings new challenges in maintaining a high security and quality of electricity supply. New techniques are required for grid support and power balance. The highest potential for these techniques is to be found on the part of the electricity distribution grid.

This article addresses this potential and presents the EEPOS project’s approach to the automated management of flexible electrical loads in neighborhoods. The management goals are (i) maximum utilization of distributed generation in the local grid, (ii) peak load shaving/congestion management, and (iii) reduction of electricity distribution losses. Contribution to the power balance is considered by applying two-tariff pricing for electricity.

The presented approach to energy management is tested in a hypothetical sensitivity analysis of a distribution feeder with 10 households and 10 photovoltaic (PV) plants with an average daily consumption of electricity of 4.54 kWh per household and a peak PV panel output of 0.38 kW per plant. Energy management shows efficient performance at relatively low capacities of flexible load. At a flexible load capacity of 2.5% (of the average daily electricity consumption), PV generation surplus is compensated by 34–100% depending on solar irradiance. Peak load is reduced by 30% on average. The article also presents the load shifting effect on electricity distribution losses and electricity costs for the grid user.     

基于排污许可的环境标准制度改革完善研究

排污许可制度是固定点源环境管理的基础核心制度,政府以排污许可证为载体,对固定污染源的污染物排放限值、排污行为等进行许可,以排放标准的要求作为基本依据,并以环境质量标准为依据,对非达标区实施更为严格的排污许可限制。然而,现有的部分行业排放标准由于制定时间较早、科学技术支撑方法不足、与环境质量改善难以挂钩等问题,难以满足新排污许可证制度改革要求。本文在研究现行环境标准体系对排污许可制度的支撑作用与相互关系的基础上,研究了基于排污许可制的排放标准存在的主要问题,并以健全排污许可制度的环境标准支撑为目的,提出了现行环境标准体系的完善和修订建议。     

基于污染物排放许可的总量控制制度改革研究

污染物总量控制制度改革是基于排污许可制的环境管理制度体系改革的重点内容之一。文章分析了总量控制制度与排污许可证制度的关联关系,现有的排污行可证制度对总量控制制度融合的要求,从许可排放量确定、分配、实际排放量核算与核定等角度,深刻剖析了总量控制制度与排污许可证制度融合存在的技术和机制两大障碍。最后就污染物总量确定、许可排放量分配、实际排放量核算与责任机制等三方面为构建基于排污许可证的总量控制制度提出了改革思路和建议。     

生态文明制度体系研究——以江苏省为例

生态文明制度体系是由制度构成的一个相互配合、有机联系的整体。本文基于文献统计分析与实地调研咨询,从广义和狭义层面,分别对生态文明制度进行梳理。根据国家生态文明建设需求与省级层面实际情况,本文将广义的生态文明制度体系分为源头保护制度体系、损害赔偿与激励体系、追责考评制度体系和污染治理制度体系四大板块,并针对国家与省级重点生态文明制度,构建生态资源保护制度链与污染防治制度链。同时,对制度地位、制度衔接、相互关系及其优化选择进行分析,以提高环境管理效能,推进生态文明研究纵深发展。     

采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

Comparing Costs of Onsite Best Management Practices to Nutrient Credits for Stormwater Management: A Case Study in Virginia

Best management practices (BMPs) are widely used to mitigate impacts of increased impervious surfaces on stormwater runoff. However, there is limited detailed and up‐to‐date information available on the cost of designing, constructing, and maintaining BMPs over their lifetime. The objective of this study is to analyze BMPs recently constructed by the Virginia Department of Transportation (VDOT) to quantify their total cost per pound of phosphorus removed annually. A motivating factor for the study is recent changes to regulatory guidelines in Virginia which allow for full or partial substitution of purchased nutrient credits in lieu of constructing onsite BMPs to achieve compliance with stormwater quality regulations. Results of the analysis of nine BMPs found their cost ranged from $20,100 to $74,900, in 2014 dollars, per pound ($44,313‐$165,126 per kg) of phosphorus removed. Based on these results and assuming current credit prices procured by VDOT, purchasing nutrient credits is a cost‐effective option for the agency, especially when factoring in the cost of additional right of way for the BMP. Based on this finding, we expect compliance with stormwater quality regulations through credit purchases to become more widely used in Virginia. Moving forward, we suggest more direct tracking of BMP costs to support comparisons between BMP costs across a range of types and conditions to credit purchases for meeting stormwater regulations.     

Designing and Implementing a Network for Sensing Water Quality and Hydrology across Mountain to Urban Transitions

Water resources are increasingly impacted by growing human populations, land use, and climate changes, and complex interactions among biophysical processes. In an effort to better understand these factors in semiarid northern Utah, United States, we created a real‐time observatory consisting of sensors deployed at aquatic and terrestrial stations to monitor water quality, water inputs, and outputs along mountain to urban gradients. The Gradients Along Mountain to Urban Transitions (GAMUT) monitoring network spans three watersheds with similar climates and streams fed by mountain winter‐derived precipitation, but that differ in urbanization level, land use, and biophysical characteristics. The aquatic monitoring stations in the GAMUT network include sensors to measure chemical (dissolved oxygen, specific conductance, pH, nitrate, and dissolved organic matter), physical (stage, temperature, and turbidity), and biological components (chlorophyll‐a and phycocyanin). We present the logistics of designing, implementing, and maintaining the network; quality assurance and control of numerous, large datasets; and data acquisition, dissemination, and visualization. Data from GAMUT reveal spatial differences in water quality due to urbanization and built infrastructure; capture rapid temporal changes in water quality due to anthropogenic activity; and identify changes in biological structure, each of which are demonstrated via case study datasets.     

电厂建设运行中的水土流失预测与水土保持设计

在燃煤电厂建设运行的同时,将引起一系列的水土流失问题.以四川国电金堂电厂二期扩建工程为例,简要说明项目区水土流失预测的内容和方法,并在其基础上对可能产生的水土流失和危害进行了分析,同时介绍了建设期和运行期采取的综合防治措施,为类似工程的水土保持提供借鉴.     

城市道路暴雨径流水质特性及控制对策

由于暴雨径流冲刷引起的城市面源污染已成为受纳水体污染的主要来源。在综合国内外相关文献的基础上,分析了城市道路暴雨径流中污染物的赋存形态,总结了不同环境背景下城市道路暴雨径流污染物的浓度水平,阐述了城市道路暴雨径流水质的影响因素,论述了城市道路暴雨径流污染的控制对策,指出合理确定初期暴雨径流控制量、科学选取/设计控制技术、将暴雨径流控制措施与城市规划有机结合构建调控网络是城市道路暴雨径流污染控制的可行途径。