安徽铜陵铜尾矿硫形态及硫同位素分布特征

分析讨论了安徽铜陵水木冲S和SP剖面尾矿砂的理化指标、硫形态变化和硫酸根硫同位素组成与分布特征.结果显示：S和SP剖面整体呈酸性,pH值为2.59~6.12和3.50~6.27,由下而上有明显的降低趋势;Eh随剖面由下至上明显升高,范围为66~457和-37~307mV;酸可挥发性硫（AVS）含量为0~62.36和0~3.44mg/g,黄铁矿硫（CRS）含量为0.70~32.30mg/g和0.17~5.39mg/g;AVS与CRS的变化趋势基本一致,随剖面自下而上减少,且AVS先于CRS被氧化.2个剖面元素硫（ES）含量为0~8.83和0~3.62mg/g,随深度变化无明显规律.硫酸根硫（SO₄^2--S）含量为8.44~66.34和8.48~29.87mg/g,自下而上呈降低趋势,且分别在剖面的氢氧化物薄膜层（11.5~16.5cm和18~54cm）出现高值区.2个剖面总硫（TS）含量为9.18~109.69和12.38~37.72mg/g,表层由于淋滤含量较低,底层变化则不大.位于斜坡上的SP剖面TS及各形态硫含量均低于S剖面,表明淋滤对硫含量影响更明显.硫酸根硫同位素δ³⁴S为-3.32‰~13.43‰和-3.08‰~1.80‰,S-9硫酸根δ³⁴S为13.43‰,指示其来自于伴生硬石膏,其余层位δ³⁴S偏负且变幅较小,指示其硫酸根主要来源于硫化物的氧化.     

Development of a model to simulate soil heavy metals lateral migration quantity based on SWAT in Huanjiang watershed, China

Lateral transportation of soil heavy metals in rainfall events could significantly increase the scope of pollution. Therefore, it is necessary to develop a model with high accuracy to simulate the migration quantity of heavy metals. A model for heavy metal migration simulation was developed based on the SWAT(Soil and Water Assessment Tool) model. This model took into consideration the influence of soil p H value, soil particle size, runoff volume, sediment amount,concentration of water-soluble heavy metals dissolved in runoff and insoluble absorbed to the soil particles. This model was reasonable in Huanjiang watershed, Guangxi Zhuang Autonomous Region, south China, covering an area of 273 km~2. The optimal drainage area threshold was determined by analyzing the effects of watershed subdivision on the simulation results to ensure the simulation accuracy. The main conclusions of this paper were:(1) watershed subdivision could affect simulation migration quantity of heavy metals;(2) the quantity of heavy metals transported by sediment accounted for 97%–99% of the total migration quantity in the study watershed. Therefore, sediment played the most important role in heavy metal migration;(3) the optimal drainage area threshold percentage to ensure high simulation accuracy was determined to be 2.01% of the total watershed;(4) with the optimal threshold percentage, this model could simulate the migration quantity of As, Pb and Cd accurately at the total watershed and subwatershed level. The results of this paper were useful for identifying the key regions with heavy metal migration.     

城郊排水沟渠溶质传输的暂态存储影响及参数灵敏性

选择Na Cl为示踪剂,于2013年9~10月在合肥城郊的关镇河支渠开展5次瞬时投加示踪实验.从暂态存储、侧向补给和对流-扩散等作用机制层面,设置4种模拟情景,解析暂态存储作用对于排水沟渠溶质传输规律的影响,并对OTIS模型参数进行灵敏性分析.结果表明,暂态存储对于主流区Cl-模拟浓度穿透曲线(BTCs)峰值大小影响很大,相对偏差高达24.23%~117.26%,显著高于对峰值出现时间的影响,且暂态存储影响显著超过了侧向补给作用;由相关性分析,主流区Cl-模拟浓度BTCs峰值大小和出现时间的相对偏差与As/A具有极显著相关性;4个主要参数的灵敏度排序为AAsαD.     

稻田灌溉河流CH4和N2O排放特征及影响因素

随着农业氮肥大量施用,大量碳氮营养物质以淋溶或径流形式进入周边灌溉水体,使其成为甲烷(CH4)和氧化亚氮(N2O)的重要排放源.以我国东南部地区典型稻田灌溉河流为研究对象,于2014年9月至2016年9月连续两年原位观测表层水体CH4和N2O溶存浓度及其排放通量,旨在明确稻田灌溉河流CH4和N2O的排放特征、排放强度及其主要驱动因子.结果表明,观测期内c(CH4溶存)的年平均值为(390.57±43.95)nmol·L-1(92.80～1 577.54 nmol·L-1),c(N2O溶存)的年平均值为(40.23±3.20)nmol·L-1(10.05～75.40 nmol·L-1).CH4和N2O的排放通量(年平均)分别为(20.73±6.08)mg·(m2·h)-1和(34.30±7.12)μg·(m2·h)-1.CH4和N2O溶存浓度和排放通量整体上均呈现出春夏排放高,秋冬排放低的季节变化趋势.两年CH4累计排放总量为(3 876.30±1 153.96)kg·hm-2,N2O累计排放总量为(5.74±0.98)kg·hm-2.两者持续性全球增温潜势(SGWP,以CO2-eq计)平均为(87.99±15.73)t·(hm2·a)-1.CH4排放通量与水温、底泥可溶性有机碳(DOC)显著正相关,而与水体溶解氧(DO)显著负相关;N2O排放通量与水温、水中铵态氮(NH4+-N)和硝态氮(NO3--N)显著正相关,而与水体DO显著负相关.该研究可为科学估算我国农业灌溉流域CH4和N2O排放总量提供数据支撑和重要参考.     

In-situ electrochemical measurements of total concentration and speciation of heavy metals in acid mine drainage (AMD): assessment of the use of anodic stripping voltammetry

We assessed the use of anodic stripping voltammetry (ASV) for in-situ determinations of both total concentration and speciation of dissolved heavy metals (Cd, Cu, Pb and Zn) in acid mine drainage (AMD). In the Kwangyang Au–Ag mine area of South Korea, different sites with varying water chemistry within an AMD were studied with a field portable anodic stripping voltammeter. Anodic stripping voltammetry after wet oxidation (acidification) was very sensitive enough to determine total concentration of dissolved Cd because Cd was dominantly present as ‘labile’ species, whilst the technique was not so effective for determining total Cu especially in the downstream sites from the retention pond, due to its complexation with organic matter. For dissolved Pb, the concentrations determined by ASV after wet oxidation generally agreed with those by ICP-AES. In the downstream samples (pH>5), however, ASV data after wet oxidation were lower than ICP-AES data because a significant fraction of dissolved Pb was present in those samples as ‘inert’ species associated with colloidal iron oxide particles. The determination of total dissolved Zn by ASV after wet oxidation appeared to be unsatisfactory for the samples with high Cu content, possibly due to the interference by the formation of Zn–Cu intermetallic compounds on the mercury coated electrode. In AMD samples with high dissolved iron, use of ultraviolet irradiation was not effective for determining total concentrations because humate destruction by UV irradiation possibly resulted in the removal of a part of dissolved heavy metals from waters through the precipitation of iron hydroxides.     

Titration Curves: A Useful Instrument for Assessing the Buffer Systems of Acidic Mining Waters (10 pp)

Background, Aims and Scope The acidification of mine waters is generally caused by metal sulfide oxidation, related to mining activities. These waters are characterized by low pH and high acidity due to strong buffering systems. The standard acidity parameter, the Base Neutralization Capacity (BNC) is determined by endpoint titration, and reflects a cumulative parameter of both hydrogen ions and all buffering systems, but does not give information on the individual buffer systems. We demonstrate that a detailed interpretation of titration curves can provide information about the strength of the buffering systems. The buffering systems are of importance for environmental studies and treatment of acidic mining waters. Methods Titrations were carried out by means of an automatic titrator using acidic mining waters from Germany and Canada. The curves were interpreted, compared with each other, to endpoint titration results and to elemental concentrations contained therein. Results and Discussion The titration curves were highly reproducible, and contained information about the strength of the buffer systems present. Interpretations are given, and the classification and comparison of acidic mining waters, by the nature and strength of their buffering systems derived from titration curves are discussed. The BNC-values calculated from the curves were more precise than the ones determined by the standard endpoint titration method. Due to the complex buffer mechanisms in acidic mining waters, the calculation of major metal concentrations from the shape of the titration curve resulted in estimates, which should not be confused with precise elemental analysis results. Conclusion Titration curves provide an inexpensive, valuable and versatile tool, by which to obtain sophisticated information of the acidity in acidic water. The information about the strength of the present buffer systems can help to understand and document the complex nature of acidic mining water buffer systems. Finally, the interpretation of titration curves could help to improve treatment measurements and the ecological understanding of these acidic waters.     

深孔预裂爆破对含坚硬顶板高瓦斯煤层的综合作用研究

为研究深孔预裂爆破技术在含坚硬顶板高瓦斯煤层开采中的应用,以顾桥矿1123(1)工作面坚硬顶板为研究对象,基于小挠度理论建立了坚硬顶板垮落力学模型,导出了初次来压步距计算式;综合考虑瓦斯抽采需要,对深孔预裂爆破孔进行了优化设计,并在工作面顶板中开展了现场试验研究。结果表明:在工作面推进至27.3m时出现垮落,爆破后钻孔瓦斯流量显著增加,部分提高至30倍以上,瓦斯抽采量提高了3.5倍,初采期间安全回采煤炭25万吨,实现了坚硬顶板控制和卸压增透双重作用。     

不同孔径排放钻孔有效影响半径的时空响应

针对矿井在施工排放钻孔局部防突措施时,已知排放时间,如何确定排放钻孔孔径和钻孔间距这一难题,提出一种钻屑量和钻屑瓦斯解吸指标现场测试法,结合数值模拟计算,确定不同孔径排放钻孔有效排放半径随时间的变化规律。研究结果表明:同一孔径排放钻孔,随着排放时间的增加,有效排放半径呈幂指数增大;不同孔径排放钻孔,随着排放钻孔直径的增加,有效排放半径呈幂指数增大。研究结论对矿井选取合适的排放钻孔孔径及布置参数具有指导意义。     

A model of rainfall redistribution in terraced sandy grassland landscapes

A simple model of rainfall redistribution within a terraced sandy grassland landscape has been developed. The model assumes that rainfall redistribution is driven by rainfall impulses and is controlled by characteristic field capacity of soils. When the rainfall intensity is large enough to render soil water content greater than its characteristic field capacity, the excessive soil water can drain very quickly by means of large amounts of non-capillary pores of sandy soils or by means of surface runoff. Exponential distribution of rainfall impulses was assumed and tested with measured daily rainfall at two meteorological stations in the sandy grassland area of north China. The model was solved to give the equivalent rainfall at each terrace in the landscape.     

Geochemical Characteristics of the Acid Mine Drainage in the Water System in the Vicinity of the Dogye Coal Mine in Korea

This study investigated geochemical characteristics of the acid mine drainage (AMD) discharged from the abandoned mine adits in the vicinity of the Dogye coal mine in Korea. Acid mine drainage discharged from Jeoncha pit adit of the Dogye coal mine, which is the main source of the AMD in the study area, had a pH value of 3.0 and concentrations of 2148mg SO₄ ^2– L^–1, 229mg Fe L^–1, 71mg A1 L^–1 and 11mg Mn L^–1. The reduction of some metal concentrations downstream from the discharge point could be explained on the basis of dilution and precipitation. The order of removal of metal ions downstream from the discharge point was Fe>A1, Cu>Zn, Mn. Acidity could be used as a good determining factor offering comprehensive and quantitative values for the polluting extent of acid mine drainage. The acidities existing in all acidic water samples in the Gunahan district originated primarily from mineral acidity, especially in the upper Nahan Creek from dissolved Fe and Al and in the middle and down Nahan Creek from dissolved Al. From the application of the WATEQ4F program, it was determined that predominant species of dissolved Fe in all water samples was Fe²⁺, and those of dissolved Al were AlSO₄ ⁺ and Al³⁺ except for IW2 sample which was associated with white precipitates. The species of dissolved Al in IW2 sample include also AlOH²⁺ and Al(OH)₂ ⁺. The saturation indices of goethite and haematite were positive in the water samples associated with ochrous precipitates (usually called Yellow Boy), therefore these solids might be precipitated. For the IW2 sample, the saturation indices of amorphous Al(OH)₃ and gibbsite were positive, so theoretically these solids might also be precipitated. By XRD analysis, it was found that goethite occurs in ochrous precipitates, and gibbsite in white precipitates.