金隆公司烟尘输送系统的改造

介绍了金隆公司烟尘输送系统的改造过程,着重论述了A烟尘中问仓及双螺旋运输机、布袋收尘器的运行状况、存在的主要问题及改造经过;A、C烟尘系统对接的原因及实施过程。     

煤层注水过程分析和煤体润湿机理研究

分析了煤层注水过程中水在煤体中的运动动力和过程,用界面化学理论分析了煤体表面的润湿过程,得出了煤体能够自行润湿的条件,即润湿过程的润湿功必须为正,同时得出了各种润湿过程的判断依据.根据上述理论分析,阐明了煤层注水降尘的润湿机理,为煤层注水提供理论基础.     

北京市大气PM2.5中矿物成分的污染特征

为了解北京市大气细粒子中矿物成分的浓度水平和污染特征,在清华园和车公庄进行了连续1a的PM_2.5累积周采样和全样品分析.Al、Si、Ca、Mg和Fe等地壳元素的周变化相似,最大周均浓度均出现在春季有强沙尘天气的一周;其季节变化显著,显示季节性的源排放以及气象条件对矿物成分的含量影响显著.土壤尘的季节平均浓度从夏季逐步上升,至次年春季达到最高(21.1 μg·m^-3),表明春季频繁发生的沙尘天气对土壤尘细粒子有重要贡献.大量的建筑活动可能大大增加了北京细粒子中Ca的负荷,应加强其排放控制.     

Experimental research into effects of obstacle on methane-coal dust hybrid explosion

An experimental system including pressure transducer, data acquisition card, computer and electric spark ignition device was set up to research methane-coal dust hybrid explosions in closed tubes with different types of obstacles inside. Its dynamic response time was less than a millisecond and the test precision was 0.1%. The experimental results show that the obstacles had great effects on the explosion characteristics in the tube. Hollow obstacles linked with inner wall of the tube induced faster pressure rising than installed center blocked solid obstacles. Obstacles with more sharp corner induce more violent explosions. The most dangerous explosion occurred when spacing between obstacles almost equaled the inner diameter of the tube for the same size obstacle.     

南钢1~#、2~#高炉出铁场除尘系统风量集中改造的实践

论述了南钢1#、2#炉出铁场除尘风量集中改造技术,并对风量集中改造的原因、改造方案和效果进行评定,利用两个高炉共用一个出铁场除尘器的特点,瞬时将风量集中到单座大喷的高炉,强化异常生产状态下铁口抽风的效果,解决大喷时厂房"冒烟"的问题。     

纺织工业粉尘爆炸危险区域划分方法

根据国家标准,分析了爆炸性粉尘环境危险区域划分的方法和步骤,以粉尘释放源释放频率和形成爆炸混合物的可能性为指标,给出了危险区域划分方法,并以某纺织企业为例进行了说明,所得结果对纺织企业的安全生产具有借鉴意义。     

移动通风槽技术在攀钢炼铁高炉矿槽除尘系统的应用

采用移动通风槽技术对攀钢炼铁高炉矿槽除尘系统槽上原有吸尘点进行改造,改造后达到节能减排、降低成本的目的,具有一定的经济效益及环境效益.     

煤矿综掘面泡沫降尘技术研究与实施

针对煤矿综掘面粉尘治理技术中存在的不足,采用泡沫降尘新技术结合长压短抽式通风方式进行粉尘防治。以霍尔辛赫矿为例,根据井下实际情况,利用GAMB IT和FLUENT建立掘进巷道的几何模型,并对巷道掘进通风过程中粉尘分布规律进行解算,将模拟结果和现场实测数据对比,确定掘进面回风侧的高浓度粉尘分布区。对掘进面煤样进行湿润性试验,确定最佳的发泡剂添加比例。综合以上情况,泡沫降尘技术实施时采用环形前置式喷头布置,发泡剂添加比例定为10‰,并在回风侧距掘进面5 m、距底板2 m处设置风筒,将高浓度粉尘抽出并沉降。现场实测数据显示,泡沫降尘技术降尘效率明显高于喷雾降尘技术。使用泡沫降尘时,在司机侧测得全尘及呼吸性粉尘降尘效率分别达到75.4%和74.7%。     

以珠三角典型灰霾天气为例谈资料分析方法

分析处理复杂问题需要抓住主流,以珠三角地区发生的一次典型灰霾天气过程为例讨论了抽丝剥茧的资料分析方法.这次灰霾过程同期20日左右,中亚、蒙古国与我国北方发生了当年沙尘天气影响范围最广的一次强沙尘暴过程,冷空气前锋22日凌晨到达穗港地区,但穗港两地空气质量发生了相反的变化,香港空气质量急剧恶化,气溶胶浓度超过700μg/...     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.