Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

Optimal charges on river effluent from lumped and distributed sources

We propose a modelling framework for the design of a Pigouvian effluent tax, in an environmental management problem implicating several economic agents located in a river basin. The proposed charging system allows for the agents' geographical position relative to the river's sections, at which environmental standards are to be enforced, and takes into account the possible different market structures within which the agents are operating. In particular, we consider industrial agents competing on an oligopolistic market, and a set of farmers acting as price takers on a large market. A regional authority's goal is to induce agents to some sort of cooperation which would result in the satisfaction of the common environmental constraints. The economic process on one side, and the pollution transport and accumulation on the other, constitute two dynamic processes in two different time scales. As the economic process is much slower than the other process we can neglect the latter's transients and concentrate on the time invariant steady state solutions to the transportation equation. The model thus constructed has some noncooperative game and optimal control problem's features with space being the ‘running’ variable. This revised version was published online in July 2006 with corrections to the Cover Date.     

应用模糊综合指数法对伊犁河（伊宁段）水质的综合评价

模糊数学法对伊犁河(伊宁段)水质进行综合评价时,由于分别采用地面水环境质量标准中五类标准值的平均值及其中三个标准值,计算后的结果不一致,而模糊综合指数法避免了这类问题的出现,计算结果比较满意.从而表明,该法是对模糊数学法的进一步改进.     

入海河流对近岸海域海湾影响分析

利用污染指数法及相关系数法对盘锦市境内的河、海水质进行对比分析，从而得出近岸海域海湾水质主要受入海河流水质影响的结论。     

提高模具行业的竞争力——敏捷制造

介绍了我国模具工业结构现状及敏捷制造的基本思想 ,论述了应用敏捷制造建立模具行业的动态联盟可缩短模具设计和制造周期 ,提高我国模具工业的竞争力。     

烃类化合物气相色谱保留指数与其分配系数关系研究

报道了从烃类化合物气相色谱保留指数预测其正辛醇水分配系数的公式，研究了以不同极性相上测得的烃类化合物保留指数预测其分配系数的准确性，得出弱极性柱上测得的化合物保留指数能更准确的预测其分配系数，从而为烃类化合物分配系数的测定和预测提供了一种简便易行的新方法。     

厌氧处理原理及其在低浓度有机废水处理中的应用现状

介绍了厌氧处理原理，并对厌氧处理低浓度废水的最新进展进行了较全面的综速，高效厌氧反应器及组合工艺为这一发展提供了可能。高效厌氧反应器中以膨胀颗粒污泥床（ECSB）反应器为首选。其结构及远行特性决定了它在处理低浓度虚水方面具有潜在的优势，但中国EC,SB的应用仅处于研究阶段，尚未有生产规模的EGSB；组合工艺对低浓度废水中污染物去除率极高，出水中COD、NH3-N、TP和SS浓度均可达到较高的排放标准，对生活污水、稀释后的工业有机废水等低浓度有机废水处理具有广阔的前景。     

准确测定高锰酸盐指数考核样的方法

根据长期的实际操作经验，要准确测定高锰酸盐指数值，在样品分析中，水浴时间不能少于35min；K值在0．980-1．010；滴定时温度保持在70℃。以提高测定结果的准确度。     

云南安宁工业区工业经济-水资源-水污染系统仿真模型及策略分析

水资源短缺和水污染是安宁工业区经济发展的重要限制因素。本文将该工业区分解为3个子区,应用系统动态学方法,建立多区相关的工业经济-水资源-水污染系统仿真模型,分别对各子区1985至2000年的工业产值、工业用水差距和水质进行多方案预测。在子区域综合的基础上,结合多级决策树法,筛选出安宁工业区协调工业经济、水资源和水质之间关系的最佳方案。     

高强度钢纵梁内板的成形性分析

重点对高强度钢纵梁内板的成形性进行了分析,并且在详细分析零件几何特点的基础上,对此模型的圆角半径进行了修改,修改后零件的成形性得到了显著提高。