生物渗滤池运行参数优化研究

实验针对间歇投配污水的生物渗滤池处理生活废水的一些基本运行参数进行了优化研究。通过对生物渗滤池的出水量、不同填料性质、不同填料粒径以及不同进水水质与污染物(COD)去除率影响的研究,证实该系统的水力负荷与污染物去除率成反向关系,即当水力负荷减少时,污染物去除率会相对增加;研究还表明选用粒径为0.9～2mm自然河沙作为系统填料时,系统COD去除率较高,这时填料不易被堵塞且即使堵塞也较易恢复;运用生物渗滤池处理城市生活污水能使处理后污水COD达到城镇污水处理厂出水排放标准的一级标准。提高污水中营养物质的配比以及采用多级生物渗滤池联用,能高效处理高浓度污水,甚至使出水达标排放。     

生物絮凝在校园生活污水处理中的应用研究

将高效生物絮凝剂产生茵V3,V11,V13应用于校园生活污水处理中,可有效提高水处理絮凝效果。试验结果表明：当SBR反应器曝气时间3h,投菌量50g/L,温度28—30℃,V3对OD550,NH3-N,COD,浊度去除率分别达91．5％．82％,91．3％,93．5％,V11对OD550,COD,浊度去除率分别达89．1％,91．5％,95．1％,对NH3-N去除率较低;V13对OD550,COD,浊度去除率分别达90．7％,93.3％,92．1％,对NH3-N几乎没有去除;3株菌混合培养,3株菌形成一种互生关系．应用于水处理中当SBR曝气时间3h,投菌量50g／L,温度28～30℃,对OD550,NH3-N,COD,浊度去除率分别达93.3％,86．7％。93．5％,96％,同时能有效的改变污泥沉降性能．     

蒸汽锅炉爆炸危险性分析及预防措施

简要叙述了锅炉爆炸机理及爆炸冲击波的破坏、伤害作用,采用TNT当量法对中国石化胜利油田石化总厂动力蒸汽锅炉爆炸事故后果进行了预测计算,分析了导致锅炉爆炸事故发生的原因,并给出了应对措施。     

甲基叔丁基醚装车安全系统的改进

分析了甲基叔丁基醚装车系统存在的隐患,采取了规范储罐与装车点的安全距离、增设装车操作平台、配备消静电器及鹤管液下装车等措施,保证了装车的安全性。     

浅谈液化气钢瓶(罐)灭火抢险技术

介绍了液化石油气的性质、火灾特点以及液化石油气钢瓶、液化石油气储罐的灭火抢险技术。     

Safer and stronger together? Effects of the agglomeration on nanopowders explosion

Among the factors influencing dust explosion, the particle size distribution (PSD) is both one of the most important and complex to consider. For instance, it is commonly accepted that the explosion sensitivity increases when the particle size decreases. Such an assertion may be questionable for nano-objects which easily agglomerate. However, agglomerates can be broken during the dispersion process. Correlating the explosion parameters to the actual PSD of a dust cloud at the moment of the ignition becomes then essential. The effects of the moisture content and sieving were investigated on a nanocellulose powder and the impact of a mechanical agglomeration was evaluated using a silicon coated by carbon powder. Each sample was characterized before and after dispersion using in situ laser particle size measurement and a fast mobility particle sizer, and explosion and minimum ignition energy tests were conducted respectively in a 20 L sphere and in a modified Hartmann tube. It was observed that drying and/or sieving the nanocellulose mainly led to variations in terms of ignition sensitivity but only slightly modified the explosion severity. In contrast, the mechanical agglomeration of the silicon coated by carbon led to a great decrease in terms of ignition sensitivity, with a minimum ignition energy varying from 5 mJ for the raw powder to more than 1J for the agglomerated samples. The maximum rate of pressure rise also decreased due to modifications in the reaction kinetics, inducing a transition from St2 class to St1 class when agglomerating the dust.     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Minimum ignition energy of LDPE dust/ethylene hybrid mixture

An experimental device for evaluating the minimum ignition energy (MIE) of LDPE dust/ethylene hybrid mixture was built with the innovative mixing mode. The MIE of the hybrid mixture that contained ethylene below its lower explosive limit (LEL) was studied. The result indicated that adding a small amount of ethylene significantly reduced the MIE of the original dust cloud. All the MIEs with five different particle sizes were found to show similar trends of exponential attenuation with the increase of ethylene concentration; such attenuating effect grew as the dust particle size rose. When ethylene concentration increased and approached to its LEL, the reaction mechanism dominated by combustible dust turned into one dominated by combustible gas. The MIE decreased first and then increased with the dust mass and increased with the dust particle size. A multifactor mathematical correlation model of the MIE with the dust particle size and ethylene concentration was developed.     

Review of hydrogen safety during storage,transmission, and applications processes

Hydrogen is considered an excellent clean fuel with potential applications in several fields. There are serious safety concerns associated with the hydrogen process. These concerns need to be thoroughly understood and addressed to ensure its safe operation. To better understand the safety challenges of hydrogen use, application, and process, it is essential to undertake a detailed risk analysis. This can be achieved by performing detailed consequence modellings and assessing risk using the computational fluid dynamics (CFD) approach. This study comprehensively reviews and analyses safety challenges related to hydrogen, focusing on hydrogen storage, transmission, and application processes. Range of release and dispersion scenarios are investigated to analyse associated hazards. Approaches to quantitative risk assessment are also briefly discussed.     

Experimental study on the inhibition of methane/air explosion by modified attapulgite powder

In order to explore the influence of attapulgite powder on the methane explosion, a small-size semi-closed visual explosion experiment platform was built, and experiments were carried out. The effect of spraying powder on the whole process of methane explosion was studied when methane concentration was 7%, 8%, 9.5%, 11% and 12%, respectively. When the methane concentration was 11%, the maximum explosion overpressure dropped by modified spraying attapulgite powder was as high as 33.26%, and at the same time, the reduction rate of flame propagation velocity reached the maximum value of 36.65%. Furthermore, when the methane concentration was 9.5%, the experimental results when the powder spraying amount of modified attapulgite was 120 mg, 160 mg, 200 mg, 240 mg and 280 mg showed that when the powder spraying was 240 mg, the maximum explosive overpressure decreased by 33.14%, and the reduction rate of the peak flame propagation velocity reached the maximum value of 33.73%. Through the video images recorded by the high-speed camera, the flame structure, shape, color, etc. Were analyzed. The characterization analysis illustrated that the modified attapulgite powder has a small particle size, relatively large porosity and specific surface area. Also, it has a high weight loss rate. Combined with the results of characterization analysis, the explosion suppression mechanism of modified attapulgite powder was discussed. It was found that the modified attapulgite powder could effectively absorb the active free radicals generated in the explosion, and the modified new chemical components have a better thermal decomposition and endothermic effect and a better suppression of methane explosions.