诱导喷嘴改进滤筒脉冲清灰效果的实验研究

改善清灰效果是提高滤筒除尘效率的关键和难点问题。运用自制脉冲喷吹实验台,采用诱导喷嘴(超音速引流喷嘴和气流散射器)对325 mm×660 mm滤筒进行脉冲喷吹清灰实验研究,并与采用普通喷吹孔的实验结果进行比较分析,得出采用诱导喷嘴时侧壁正压力峰值平均值是普通喷吹孔的1.465倍;且采用诱导喷嘴时各测点的不均衡系数为0.768～1.336,普通喷口为0.270～2.251,而不均衡系数越接近于1,其清灰效果越好;同时,采用诱导喷嘴时各测点基本在同一时刻达到正峰值。实验充分表明采用诱导喷嘴确保了滤筒长度方向上内壁清灰压力的均匀性,且对滤筒清灰效果有明显的改善作用。     

固定式可燃气体检测报警器运行管理中存在的问题及对策

针对固定式可燃气体检测报警器运行管理中存在的问题进行了分析,并提出整治措施.     

磷酸铵盐亚纳米粉体灭火性能实验研究

使用溶剂-非溶剂法制备了粒径达到亚纳米量级（300nm-500mm）的磷酸铵盐灭火剂,建立了1．2m×1．2m×1．2m的小尺度灭火实验平台,开展了灭油池火和木垛火的全淹没灭火实验,对磷酸铵盐亚纳米粉体的灭火性能进行了研究,并与普通磷酸铵盐粉体的灭火性能进行了比较。实验结果显示磷酸铵盐亚纳米粉体的灭火性能要明显高于普通粉体,并且在低压下就可以获得很好的灭火果。工作压力的增加会缩短粉体的灭火时间,但是对于磷酸铵盐亚纳米粉体灭木垛火的情况,由于灭火时间相差示大,反而会导致灭火剂用量增加。     

可燃气体燃爆特性综合试验装置构建与甲烷试验

为研究半开敞空间内可燃气体爆炸过程,设计带有泄压面的气体爆炸室,并在此基础上构建一套可燃气体燃爆特性综合试验装置。运用该试验装置,研究预混塔内甲烷气体分层现象以及甲烷爆炸浓度与最小点火能之间的变化规律。甲烷分层试验结果表明:静置一段时间后,预混塔中甲烷浓度随高度的增加而增大。最小点火能试验结果显示,当甲烷的试验爆炸体积分数在10%～13%时,其浓度与点火能之间呈现比较平缓的变化关系,而当其体积分数小于10%或大于13%时,浓度稍微变化,其点火能将发生明显变化。     

基于单片机甲烷浓度监测的研究

设计了一种基于单片机来实现的甲烷浓度检测和报警功能的系统,该检测系统以AT89S52单片机为核心,包括有电源电路、传感器采集电路、信号放大电路、红外遥控电路、声光报警电路、显示电路等功能模块组成,通过传感器采集电路采集信号,输出与甲烷浓度对应电压信号,把电压信号进行A/D转换后送入单片机,经单片机处理后驱动器显示出被测气体甲烷浓度值,若被测甲烷浓度大于报警电路预设数值,报警电路发出报警,可以及时切断供电系统,防止瓦斯爆炸事故的发生.该系统采用高精度敏感元件,集成运算放大器INA128,ADc0809,以及远距离高可靠性通信芯片,且具有高速的处理能力,是一种电路设计新颖,参数测量准确,操作方便的甲烷浓度报警监控系统,实现了数字瓦斯气体的实时监控.为实现数字化井下测控和可视化综合管理提供了切实可行的方案.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

松散煤体渗流传热试验装置研制

为研究松散煤体低温氧化及通风供氧下的渗流传热规律,研发了渗流传热试验装置。试验装置由气体加湿系统、气体加热系统、煤样反应系统、数据采集系统和安全保护系统组成;本装置可实现自动加湿、控温、自动采集数据及处理数据。为解决装置使用和运行中的安全问题,设计了断电保护、有害气体检测等措施,保障试验装置的安全、可靠。     

Renewable biomass gel reinforced core-shell dry water material as novel fire extinguishing agent

This work explores the feasibility of using chitosan (CS)-sodium alginate (SA) crosslinking gel to reinforce dry water (DW) composites. The stability and fire extinguishing efficiency of the DW powder are investigated. Compared to ordinary DW material, water loss rate of the modified DW composite is decreased, and its pressure resistance and stability are significantly increased. Moreover, it possesses higher fire extinguishing efficiency than conventional dry powder. Fire extinguishing mechanism and gel formation mechanism are proposed. The improvement in stability has great significance for the storage and transportation of DW materials. These results demonstrate the ability to create a fully green and renewable crosslinking gel capable of endowing high stability to DW material. This work provides a novel solution to improve the stability of DW materials, which will have great application prospect in fire suppression of some flammable hazardous chemicals.     

制导弹药火工元件加速寿命试验技术研究

准确判定组件的剩余寿命是制导弹药维修工作的重要组成部分。针对制导弹药火工元件的特点,分析了加速寿命试验的类型、加速应力、寿命分布和加速系数;研究了试验中的应力水平、样本选取和失效判定等问题;探讨了基于线性无偏估计的数据处理方法。该试验方法也适用于制导弹药其他组件的寿命预测。     

Evaluation of mercury speciation and removal through air pollution control devices of a 190 MW boiler

Air pollution control devices (APCDs) are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction (SCR) and wet flue gas desulfurization (FGD) systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation a ect mercury removal e ciently at coal-fired utilities. The Ontario Hydro Method (OHM) recommended by the U.S. Environmental Protection Agency (EPA) was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor a ecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury (Hg2+) and more elemental mercury (Hg0) at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation e ciency reached 71.0%. Therefore, oxidized mercury removal e ciency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%–96.8% of oxidized mercury was controlled, but only 54.9%–68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal e ciency was 95.9%–98.0%, and there was a big di erence in the total mercury removal e ciencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08.