KALMAN FILTER CALCULATION OF SAMPLING FREQUENCY WHEN DETERMINING ANNUAL MEAN SOLUTE CONCENTRATIONS

ABSTRACT: A linear filter (Kalman filter) technique was used with a Streamflow-concentration model the minimize surface water quality sampling frequencies when determining annual mean solute concentrations with a predetermined allowable error. The Kalman filter technique used the stream discharge interval as a replacement for the more commonly used time interval. Using filter computations, the measurement error variance was minimized within the sample size constraints. The Kalman filter application proposed here is applicable only under several conditions including: monitoring is solely to estimate annual mean concentration; discharge measurement errors are negligible; the Streamflow-concentration model is valid; and monthly samples reflect the total variance of the solute in question.     

INSTANTANEOUS PEAK FLOW ESTIMATION PROCEDURES FOR NEWFOUNDLAND STREAMS1

ABSTRACT: A procedure of estimating instantaneous flood flows for various return periods on the Island of Newfoundland is presented. The procedure is based on annual maximum instantaneous flows rather than annual maximum daily-mean flows, as the latter requires the conversion of estimated daily-mean flows into instantaneous flows. Regression equations were developed for each of three homogeneous regions for the desired return periods. The flood flow estimation capability of the presented procedure is demonstrated to be better than any other currently available procedure on the Island.     

ANALYSIS OF WIND- AND SHIP-INDUCED SEDIMENT RESUSPENSION IN DULUTH-SUPERIOR HARBOR1

ABSTRACT: Suspended solids and ammonium concentration profiles measured at five locations in Duluth-Superior Harbor during July-October 1985 were analyzed to quantify wind and ship effects on sediment resuspension and resulting harbor water quality. Wind components from the SE quadrant correlated strongly with depth-averaged suspended solids concentrations that were unaffected by ship passage or thermal stratification. Winds from that quadrant have the largest fetch in the harbor. The highest correlation (r²= 0.93) was with the 6-hour average of the ESE wind velocity component. Multiple linear regression analysis of data from post-ship passage concentration profiles yielded numerical estimates of settling velocities of 0.08 to 0.25 cm s^?1, typical of ship-resuspended sediments, and vertical eddy diffusivities of 4 to 13 cm² s¹. The results suggest that ambient vertical eddy diffusivities in the harbor are less than 4 cm² s^?1 in the absence of ship passages and with winds less than 5 m s^?1 (10 knots).     

REGIONAL FLOOD EQUATIONS FOR THE PROVINCES OF ONTARIO AND QUEBEC1

ABSTRACT: When nonparametric frequency analysis was performed on 183 stations from Ontario and Quebec, unimodal and multimodal maximum annual flood density functions were discovered. In order to determine generating mechanisms, a monthly partitioning of the annual maximum floods was undertaken. The timing of the floods revealed that the unimodal distributions reflected a single flood generating mechanism while the multi-modal densities reflected two or more mechanisms. Based on the division of the flood series by mechanisms, nine homogeneous regions were delineated. L-moment distributional homogeneity tests along with smaller standard errors for the regional equations supported the delineation.     

DOWNSTREAM CHANNEL GEOMETRY FOR USE IN PLANNING-LEVEL MODELS1

ABSTRACT: There is considerable potential for use of channel dimension data in planning-level models for resource and impact assessment. The channel dimension data is used to route flows and sediment through the basin. The cost of obtaining actual surveyed data for large watersheds is typically prohibitive. Predictive equations have been developed based on 674 stations from watersheds across the United States which encompass a wide variety of channel types and sizes. These equations were tested against an independent data set and found to be adequate for use in planning-level models. Future research is advocated which would include data from regions and stream types not included in this study.     

JUSTIFICATION FOR A REDUCTION IN THE CREST-STAGE GAGE PROGRAM IN LOUISIANA1

The crest-stage gage program in Louisiana was evaluated to determine if the data were adequate for use in developing regional flood-frequency equations and to determine if any crest-stage gage stations could be discontinued. An abundance of data at many crest-stage gage stations and a lack of data for urban areas and flat-slope areas indicated a need for a shift in the number, type, and locations of gages. Correlations and comparisons of annual peak discharges and watershed characteristics of 96 existing stations resulted in the elimination of 72 stations and the addition of one new station, reducing the total network to 25 stations that could be used for future flood-frequency analyses. The adequacy of the reduced network for development and verification of regional flood-frequency equations was tested by comparing a set of regional flood-frequency equations developed using data from the full network with a set developed using data from the reduced network. The results indicate that the crest-stage gage network can be reduced to 25 stations and still provide adequate information for future flood-frequency analyses.     

SOME GEOMORPHIC RELATIONSHIPS AND HYDROGRAPH ANALYSIS1

ABSTRACT: First order drainage channels originate when the tractive force exerted by flowing water is sufficient to move surface sediment. The amount of runoff available to move sediment is a function of geologic and climatic characteristics. An experimental analysis showed that soils derived from fine grained rocks had lower infiltration rates and higher runoff volume than soils derived from coarser grained rocks in a semi-arid climate. Root density and penetration increased in a more humid climate and increased infiltration rates. The number of first order channels was inversely proportional to the infiltration capacity of the soil. Each first order channel acts as a source area for surface runoff. The distribution of first order channel distances from the gage determines the timing of the delivery of water to the gage. A comparison of the frequency histogram of first order channel distances for drainage basins in Pennsylvania and their hydxographs of runoff from general storms showed marked similarity. This close correspondence indicated the shape of the surface runoff hydrograph and was largely controlled by the distribution of first order channel distances.     

EFFECTS OF RATE STRUCTURE KNOWLEDGE ON HOUSEHOLD WATER USE1

ABSTRACT: Socioeconomic determinants of individual household water use were estimated using regressions of these characteristics with actual household water use for winter and summer. Results were disaggregated between those consumers who were aware of an increasing block rate price structure and those who were not. Most of the informed group members believed that this price structure did result in significant reductions in water use. Nevertheless, overall water use was greater for the informed group. The determinants of water use were found to differ between informed and uninformed users as well as between winter and summer. The uninformed users were influenced by a larger set of variables in each season than the informed group. In winter, the informed group members with swimming pools and/or arid landscaping used less water than their uninformed counterparts. Summer water use increased with length of tenancy in home for the uninformed group but not for informed, while increasing with ownership for informed consumers.     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.     

CAUSES OF PEAK FLOWS IN NORTHWESTERN MONTANA AND NORTHEASTERN IDAHO1

ABSTRACT: Both catchment experiments and a review of hydrologic processes suggest a varying effect of forest harvest on the magnitude of peak flows according to the cause of those peak flows. In northwestern Montana and Northeastern Idaho, annual maximum flows can result from spring snowmelt, rain, mid-winter rain-on-snow, or rain-on-spring-snowmelt. Meteorologic and physical data were used to determine the cause of annual maximum flows in six basins which had the necessary data and were smaller than 150 mi². Rain-on-spring-snowmelt was the most frequent cause of annual maximum flows in all six basins, although there was a strong gradient in the magnitude and cause of peak flows from southwest to northeast. Less frequent mid-winter rain-on-snow events caused the largest flows on record in four basins. Mid-winter rain-on-snow should be distinguished from rain-on-spring-snowmelt because of differences in seasonal timing, the relative contributions of rain vs. snowmelt, and the projected effects of forest harvest. The effects of mixed flood populations on the flood-frequency curve varied from basin to basin. Annual maximum daily flows could not be reliably predicted from rainfall and snowmelt data.