基于吸附质-分子探针的新型交联壳聚糖的吸附特性

研究了CCTS对低浓度游离酸的吸附特性,基于吸附质-分子探针电位法,考察了吸附剂活性中心数目、游离酸种类和温度对吸附行为的影响。结果表明,在30℃时,CCTS吸附游离酸的过程,遵循单分子层机理进行吸附。吸附剂―吸附质相互作用能U制约表观吸附速率常数K,K、U大小分别为2.519×10-2,4.084×10-2,9.398×10-2L/min和7.264,7.420,7.926 kJ/mol,两者存在线性相关性,呈逐渐增大趋势。K、U大小随着活性中心数目G的增加而增大。CCTS吸附游离酸为吸热过程,吸附表观活化能Ea为33.98 kJ/mol。3种类型游离酸K、U的大小顺序为:HClO4>HNO3>H2SO4,吸附分维数Dw分别为1.384、1.567、1.911,Dw值越大,导致表观吸附速率常数降低。     

金属飞片对EFI起爆能量的影响

目的降低EFI的发火能量,研究非金属飞片与金属飞片在EFI中的应用。方法采用飞片材料匹配的方法,并选择金属Al与金属Ti,开展金属飞片的设计与制备,得到Al-PI与Ti-PI的金属飞片以及金属飞片-爆炸桥箔metallic flyer,并开展发火摸底试验。结果在不额外对金属飞片进行绝缘处理的情况下,含有金属飞片的EFI均未发火;对金属飞片进行绝缘处理后,含有金属飞片的EFI均可靠发火。采用光子多普勒测速仪(PDV)进行的飞片速度测试结果表明,在充电电压为1200 V时,Ti-PI金属飞片的速度为3604 m/s,金属飞片-爆炸桥箔一体化换能元速度为2986m/s。结论同样的发火电压下,金属飞片-爆炸桥箔一体化换能元的金属飞片速度明显小于绝缘层较厚的金属飞片速度。     

三普2#地热站供热工程设计方案优化分析

通过分析地热供热的相关概念，建立了高效利用地热能源的一系列实现途径。根据工程的基础材料，从技术和经济方面对单纯地热供热方案、地热燃气调峰方案、热泵配置方案以及最终的组合方案进行了优化和调整，从而为三普2#地热井供热工程提供了优化方案，提高了该地区的地热利用率。     

上海市人口分布变动的空间特征分析

空间自相关分析是一种空间统计的方法。可以揭示区域变量的空间结构形态。通过对2000-2003年期间上海市乡镇人口密度变化率的空间相关性分析，发现上海市近几年人口分布空间变动格局表现为以中心城区为中心的环状分布模式，中心城区和远郊区人口密度变化小。人口增长缓慢，而近郊区人口密度变化大，人口增长迅速。全市人口密度变化率存在着显著的空间集聚现象。四种类型的空间关联在空间分布上具有明显的规律性。研究结果表明，目前上海市人口郊区化趋势明显。高人口密度区域在不断向外扩张，人口分布与经济、交通等社会发展因素的关系日益密切。这些研究结果说明利用空间自相关统计方法能够扩展和加强对人口分布空间模式的研究．从而为经济总体布局和城市化建设提供辅助参考作用。     

Computer-assisted analysis of fetal behavioural states

A computerized system which simultaneously acquires and quantifies several ultrasonically detected fetal activities, including gross body movements, breathing movements, and eye movements, was developed in order to obtain additional quantitative data on fetal behaviour. Movements were automatically related to fetal heart rate allowing computation of their mean incidence, duration, lag time and percentage time spent moving during different heart rate patterns. The incidence of various behavioural states was also calculated. The study of 15 healthy fetuses near term revealed the existence of statistically significant differences in these parameters between low and high variability patterns of fetal heart rate suggesting a quantitative modulation of fetal movements by behavioural states.     

不同升温速率下模块装药的烤燃特性分析

目的 研究不同升温速率下模块装药烤燃特性的变化.方法 基于模块装药结构及其烤燃化学反应机理,提出基本假设,建立二维非稳态烤燃计算模型,通过数值模拟计算分析研究模块装药在不同工况下的烤燃特性.结果 在3.30、5.25、7.20 K/h的加热条件下,模块装药发生烤燃响应的着火温度分别为476.6、473.1、477.1 ...     

Pipeline leakage detection and isolation: An integrated approach of statistical and wavelet feature extraction with multi-layer perceptron neural network (MLPNN)

Leakage diagnosis of hydrocarbon pipelines can prevent environmental and financial losses. This work proposes a novel method that not only detects the occurrence of a leakage fault, but also suggests its location and severity. The OLGA software is employed to provide the pipeline inlet pressure and outlet flow rates as the training data for the Fault Detection and Isolation (FDI) system. The FDI system is comprised of a Multi-Layer Perceptron Neural Network (MLPNN) classifier with various feature extraction methods including the statistical techniques, wavelet transform, and a fusion of both methods. Once different leakage scenarios are considered and the preprocessing methods are done, the proposed FDI system is applied to a 20-km pipeline in southern Iran (Goldkari-Binak pipeline) and a promising severity and location detectability (a correct classification rate of 92%) and a low False Alarm Rate (FAR) were achieved.     

On the determination of the laminar burning velocity from closed vessel gas explosions

A methodology to determine the laminar burning velocity from closed vessel gas explosions is explored. Unlike other methods which have been used to measure burning velocities from closed vessel explosions, this approach belongs to the category which does not involve observation of a rapidly moving flame front. Only the pressure–time curve is required as experimental input. To verify the methodology, initially quiescent methane–air mixtures were ignited in a 20-l explosion sphere and the equivalence ratio was varied from 0.67 to 1.36. The behavior of the pressure in the vessel was measured as a function of time and two integral balance models, namely, the thin-flame and the three-zone model, were fitted to determine the laminar burning velocity. Data on the laminar burning velocity as a function of equivalence ratio, pressure and temperature, measured by a variety of other methods have been collected from the literature to enable a comparison. Empirical correlations for the effect of pressure and temperature on the laminar burning velocity have been reviewed and two were selected to be used in conjunction with the thin-flame model. For the three-zone model, a set of coupled correlations has been derived to describe the effect of pressure and temperature on the laminar burning velocity and the laminar flame thickness. Our laminar burning velocities are seen to fall within the band of data from the period 1953–2003. A comparison with recent data from the period 1994–2003 shows that our results are 5–10% higher than the laminar burning velocities which are currently believed to be the correct ones for methane–air mixtures. Based on this observation it is concluded that the methodology described in this work should only be used under circumstances where more accurate methods can not be applied.     

混合电镀废水处理工艺

物化法是处理混合电镀废水的一种有效方法,对COD、Pb离子、Ni离子尤其是Pb离子、Ni离子的处理效果非常理想。COD的去除率达到80.1%,Pb离子的去除率达到97.2%,Ni离子的去除率达到98.1%,中间产出的污泥也可得到较好处理。