Ex situ remediation of contaminated sediments using mineral additives: assessment of pollutant bioavailability with the Microtox solid phase test

The aim of this work is to assess the potential ecotoxicological effects of contaminated sediments treated with mineral additives. The Microtox solid phase test was used to evaluate the effect of mineral additives on the toxicity of sediment suspensions. Four Mediterranean port sediments were studied after dredging and bioremediation: Sample A from navy harbor, sample B from commercial port and samples C and D from pleasure ports. Sediment samples were stabilized with three mineral additives: hematite, zero-valent iron and zeolite. Results show that all studied mineral additives can act as stabilizer agent in highly contaminated sediments (A and C) by decreasing dissolved metal concentrations and sediment toxicity level. On the contrary, for the less contaminated samples (B and D) hematite and zeolite can provoke toxic effect towards Vibrio fischeri since additive particles can favor bacteria retention and decrease bioluminescence emission.     

Remediation of metal-contaminated soils with the addition of materials - part II: leaching tests to evaluate the efficiency of materials in the remediation of contaminated soils

The effect of the addition of materials on the leaching pattern of As and metals (Cu, Zn, Ni, Pb, and Cd) in two contaminated soils was investigated. The examined materials included bentonites, silicates and industrial wastes, such as sugar foam, fly ashes and a material originated from the zeolitization of fly ash. Soil + material mixtures were prepared at 10% doses. Changes in the acid neutralization capacity, crystalline phases and contaminant leaching over a wide range of pHs were examined by using pH_stat leaching tests. Sugar foam, the zeolitic material and MX-80 bentonite produced the greatest decrease in the leaching of pollutants due to an increase in the pH and/or the sorption capacity in the resulting mixture. This finding suggests that soil remediation may be a feasible option for the reuse of non-hazardous wastes.     

填埋场中亚硝酸还原酶测定条件的优化

填埋垃圾中的含氮化合物经一系列生物脱氮作用,最终使得填埋场中的氮素得以消减,在这一过程中亚硝酸还原酶起着十分重要的作用。以填埋场中的填埋垃圾为研究对象,在土壤亚硝酸还原酶测定方法的基础上,对亚硝酸还原酶活性测定条件进行了优化。结果表明,填埋垃圾中的亚硝酸还原酶活性测定的最优条件为:垃圾样品风干温度25℃,2mL的1%NaNO2溶液和2.5 mL的1%葡萄糖溶液,抽气5 min,置于25℃的培养箱中培养24 h。优化后的测定条件相对标准偏差(RSD)小于1.27%,表明该方法具有较高的灵敏度和精密度。     

抗压实验法厌氧颗粒污泥机械强度的测定及影响因素分析

通过首先对厌氧颗粒污泥样品进行筛分,然后测定其机械强度,解决了实际操作过程中现有抗压实验法出现的精确度与重现性较差的问题。通过对不同来源厌氧颗粒污泥样品机械强度的测定、对比分析发现,厌氧颗粒污泥的机械强度大小与反应器的规模、反应器所采用水力负荷存在一定的正相关性,且与其主要金属元素（Ca、Fe和Mg）含量的大小存在着密切的关系。     

混合集成电路HALT和HASS技术应用研究

介绍了HALT和HASS技术的概念和内涵,探讨了混合集成电路HALT和HASS技术应用的基本原理以及具体的应用方法和流程。     

电磁阀贮存寿命加速试验技术研究

首先陈述了贮存寿命加速试验的基本原理,介绍电磁阀的结构组成,分析了失效模式和失效机理后,采取恒定应力加速试验方法,然后运用极大似然估计和最小二乘法对数据进行处理,最后得出其贮存寿命等结论。     

多输入多输出(MIMO)振动试验技术

多输入多输出(MIMO)振动试验由于可以更好的模拟产品的真实工作环境,是振动试验的一个发展方向。本文分析了其产生需求的根本原因,同时介绍了国内外的发展现状及其应用情况,之后对MIMO试验系统进行了分类,介绍了试验控制器和控制方法,并探讨了其工程实施所存在困难。最后针对我国MIMO试验技术的发展提出了建议,并对前景进行了展望。     

发光细菌法在水质综合毒性在线检测中的应用

以海洋发光细菌费氏弧菌（Vibriofischeri）作为检测生物,采用冻干菌粉快速复苏技术,研究费氏弧菌在水质检测中的最佳测试温度和有效性测试条件,并对硫酸锌等多种毒物和几种实际水样进行发光抑制作用分析。研究表明,费氏弧菌冻干粉复苏菌液保存在2～5℃条件下能有效测试7d,最佳测试温度为15℃,最佳测试时间为15min。氯化汞、硫酸锌、硫酸镉等重金属和苯胺、多菌灵、甲醛等有机毒物对费氏弧菌均具有较强的光抑制作用,也即费氏弧菌对以上毒物较为敏感,并能够连续7d保持对同一浓度硫酸锌的敏感性较为一致。对几种实际水样的测试和分析表明,以费氏弧菌为指示生物的发光细菌法能够应用于水质环境安全的综合毒性在线监测预警中。     

三维电极法深度处理维生素生产废水

采用三维电极法对维生素废水进行深度处理,分别以钛涂钌铱板、铁板和不锈钢板作为电极阳极,石墨板作为电极阴极,柱状活性炭作为粒子电极,结果表明,当以钛涂钌铱板作为阳极,以粒径为1 mm的柱状活性炭作为粒子电极时电解效果最好,COD和色度去除率最高。实验选择电解电压、电极板间距、电解时间和初始pH值作为主要影响因素进行正交实验,实验研究证明,各因素的影响大小为电解电压>电极板间距>电解时间>初始pH值,得到的最佳参数组合分别为:电解电压为10 V,电极板间距为8 cm,电解时间为20 min,初始pH值为4,得到COD和色度最大去除率分别为59.5%和93.57%。     

A level change in mutagenicity of Japanese tap water over the past 12 yr

A relative comparison study of mutagenicity in Japanese tap water was conducted for 1993 and 2005 surveys. It intended to assess the effects of advanced water treatment installations to water works, improvement of raw water quality and improvement of residual HOCl concentration controlling. Sampling points (taps) were the same in both surveys. The results of 245 samples obtained by the Ames Salmonella mutagenicity test (Ames test) were analyzed. The Ames tests were conducted by using Salmonella typhimurium TA98 and TA100 strains with and without exogenous activation (S9). With the exception of TA100-S9, the other conditions needed no discussion as a factor in the mutagenicity level change. The average mutagenicity in 1993 and 2005 under the conditions of TA100-S9 were 2600 and 1100 net revertant L⁻¹, respectively. This indicated that the mutagenicity level of Japanese tap water decreased during the 12-yr period. Particularly a remarkable decrease in mutagenicity was observed in the water works where the advanced water treatments were installed during the 12-yr period. The advanced water treatments were effective in decreasing the mutagenicity of tap water. Mutagenicity also decreased in the water works with conventional water treatments; the improvement of residual HOCl concentration controlling was also considered to be effective in decreasing the mutagenicity of tap water.