Temporal and spatial evolution characteristics of sunshine duration over Qinghai-Tibet Plateau from 1961 to 2020北大核心CSCD

Based on observation data of daily sunshine duration from 1961 to 2020 at 175 meteorological observation stations over Qinghai-Tibet Plateau and its surrounding areas, spatial transformation analysis, climate trend analysis and M-K mutation test were used to analyze the temporal and spatial variation characteristics of the seasonal and annual sunshine duration in the region in the last 60 years. The results show that (1) annual average sunshine duration was 2 323 h, the maximum was 3 487 h in Gaer, Tibet, and the minimum was 771 h in Ya'an, Sichuan. The high-value areas were mostly located in western Tibet, northern Qinghai, western Gansu, and Xinjiang, and the low-value areas were mostly located in Nyingchi in Tibet, the mountainous area on the western edge of the Sichuan Basin, and northwestern Yunnan. The highest sunshine duration was recorded in winter (631 h), and the lowest was recorded in autumn (555 h) among the four seasons. (2) The average decrease in annual sunshine duration was 10.27 h/10 a. The largest rates of decrease were mainly in Gannan of Gansu and Ganzi of Sichuan, with the largest rate of decrease of 130 h/10 a. The areas with large rates of increase were mainly in Hotan area of Xinjiang, Liangshan of Sichuan and Lhasa of Tibet, with the largest increase of 61 h/10 a. Among the four seasons, spring exhibited an upward trend, and the remainder exhibited a downward trend. (3) Before 2017, the annual sunshine duration increased but declined after 2017. Spring sunshine duration had the largest number of mutation years, and the earliest mutation time was 1963. Winter had the fewest number of mutation years and the latest mutation time occurred in 2015. In summary, the annual and seasonal sunshine duration of Qinghai-Tibet Plateau vary greatly in space, but with the general characteristics of more sunshine in the northwest and less in the southeast, and sunshine hours were mainly decreasing, with 2017 as a mutation point of annual sunshine duration. Most areas of Qinghai-Tibet Plateau have great potential for photosynthetic production and are suitable for the development of light-loving plants and high-density planting. Shade-loving or shade-tolerant plants, including tea, are suitable for development in remote mountainous areas with low sunshine values in the western part of the basin, including Ya’an, Sichuan, and other areas, such as Medog, Tibet. © 2022 Science Press. All rights reserved.     

多尺度环境空气质量预报业务产品测试研究

为了探讨NAQPMS数值模式预报产品及其他预报业务所需产品在国家-区域-城市不同尺度单位的有效使用率、重污染过程中的作用,以及不同地区(城市)预报业务需求及作业产品需求偏差,选取17家单位进行测试研究。分析数据显示:15类参与研究产品均为各省市监测中心空气质量日常预报业务的开展作出了重要贡献,NAQPMS数值预报产品准确率最高可达到84.72%,省会城市准确率略低,总体平均可达50.21%,重污染过程的平均捕捉准确率为52.33%;研究测试产品在各尺度的获取时间均可控制在2.5 h左右。研究结果表明,指导产品能基本反映污染物形成、发展及变化趋势,明确不同地区城市预报业务需求及产品偏差,在PM_(2.5)和O_3预报准确率和重污染过程捕捉预报结果偏低等方面有待加强。     

试验方法和接种物来源对苯甲酸钠快速生物降解率的影响

化学品的快速生物降解性直接影响其在环境中的迁移、转化和归宿,是鉴别其环境危害性和持久性的基本指标,是政府管理部门对化学品进行风险管理的重要科学依据,在生态毒理测试中具有非常重要的地位。为探讨试验方法、接种物来源以及两者的交互效应对苯甲酸钠生物降解率的影响,2013—2015年间以广州地区2个主要处理生活污水的污水处理厂(DTS、LD)为接种物来源,采用OECD 301系列试验方法(301B、301D和301F)进行了苯甲酸钠的快速生物降解性试验,共获得89个标准化测试数据。统计分析结果显示,接种物来源、试验方法与接种物来源的交互效应对苯甲酸钠生物降解率影响不显著,但试验方法单一因素的影响显著。本研究表明,当受试物为易生物降解时,接种物来源、试验方法和接种物来源的交互效应对该受试物的生物降解率无显著的影响,但在同一条件下,选择不同的试验方法往往会导致最终生物降解率出现明显差异。     

Endocrine modulation and toxic effects of two commonly used UV screens on the aquatic invertebrates Potamopyrgus antipodarum and Lumbriculus variegatus

The two UV screens 3-benzylidene-camphor (3-BC) and 3-(4'-methylbenzylidene)-camphor (4-MBC) were tested regarding their toxicity and estrogenic activity. The Yeast Estrogen Screen (YES) and two sediment assays with the freshwater invertebrates Lumbriculus variegatus and Potamopyrgus antipodarum were performed. In the YES, both substances activated the human estrogen receptor alpha with EC50 values of 44.2 microM for 3-BC and 44.3 microM for 4-MBC, whereby 4-MBC attained only 8% of the maximal response of 17beta-estradiol. For P. antipodarum embryo production increased after exposure to both substances (EC50 of 4.60 microM 4-MBC=1.17 mg kg(-1)dw) while mortality increased at high concentrations. The reproduction of L. variegatus was decreased by 3-BC with an EC50 of 5.95 microM (=1.43 mg kg(-1)dw) and also by 4-MBC, where no EC50 could be calculated. While reproduction decreased, the worms' weight increased after exposure to 3-BC with an EC50 of 26.9 microM (=6.46 mg kg(-1) dw), hence the total biomass remained unaffected.     

硝酸盐对富磷剩余污泥厌氧消化的影响试验

以某采用 A/O 生物除磷工艺水质净化厂排出的富磷剩余污泥为研究对象,利用棕色消化瓶设计了 4 组厌氧消化试验,通过向其中投加NaNO3,考察硝酸盐对污泥消化过程的影响.结果表明,硝酸盐的存在导致 VSS 平均变化速率比空白样快 28.09 mg/(L·d),并且对污泥消化过程中的产甲烷阶段有一定的抑制作用;当硝酸盐存在时,厌氧氨氧化作用的发生导致上清液中的 N-NH4 变化速率减慢,硝酸盐对污泥消化过程中磷的释放有明显的抑制作用,当硝酸盐浓度高于 60 mg/L时,抑制作用明显.     

Laboratory longitudinal diffusion tests: 1. Dimensionless formulations and validity of simplified solutions

To obtain reliable diffusion parameters for diffusion testing, multiple experiments should not only be cross-checked but the internal consistency of each experiment should also be verified. In the through- and in-diffusion tests with solution reservoirs, test interpretation of different phases often makes use of simplified analytical solutions. This study explores the feasibility of steady, quasi-steady, equilibrium and transient-state analyses using simplified analytical solutions with respect to (i) valid conditions for each analytical solution, (ii) potential error, and (iii) experimental time. For increased generality, a series of numerical analyses are performed using unified dimensionless parameters and the results are all related to dimensionless reservoir volume (DRV) which includes only the sorptive parameter as an unknown. This means the above factors can be investigated on the basis of the sorption properties of the testing material and/or tracer. The main findings are that steady, quasi-steady and equilibrium-state analyses are applicable when the tracer is not highly sorptive. However, quasi-steady and equilibrium-state analyses become inefficient or impractical compared to steady state analysis when the tracer is non-sorbing and material porosity is significantly low. Systematic and comprehensive reformulation of analytical models enables the comparison of experimental times between different test methods. The applicability and potential error of each test interpretation can also be studied. These can be applied in designing, performing, and interpreting diffusion experiments by deducing DRV from the available information for the target material and tracer, combined with the results of this study.     

载人航天器关键电子产品综合环境应力试验

载人航天器电子产品在轨经历多种环境应力的综合作用,为提高载人航天器电子产品的可靠性,针对其综合应力环境考核需要,制定了载人航天器电子产品综合环境应力试验方案,并设计了试验程序,明确了各单项应力环境试验条件。经筛选,9艘载人航天器共136台电子产品参加了综合环境应力试验。试验结果表明,综合环境应力试验可以有效地暴露载人航天器电子产品设计和制造缺陷。     

电子类备件贮存失效模式及测试方法研究

结合工程装备维修器材保障工作的实际情况,对扫雷车电子类备件贮存失效模式及影响因素进行了定性分析,提出了电子类备件技术性能测试方案,研究设计了相应的检测平台及适配器,对工程装备维修器材贮存质量管理及控制进行了初步探索。     

临近空间环境及环境试验

从热力学结构、大气成分特征、大气电磁特性等方面介绍了临近空间环境参数,按照临近空间飞行器的平均密度、飞行速度、飞行高度介绍了临近空间飞行器的分类及特点。阐述了临近空间环境试验的方法,并对临近空间环境试验技术的发展提出了初步建议。     

航天器动力学试验评价技术

回顾了国内外航天器动力学试验评价技术的研究和应用,分析了国内航天器动力学试验存在的问题,阐述了复杂航天器的发展对于航天器动力学试验评价体系提出的新要求,重点分析了在评价内容、航天器环境、航天器环境模拟方法、航天器环境效应、测量与分析、评价方法及准则方面必须突破和解决的若干关键技术,展望了航天器动力学试验评价技术的发展前景。