极地冻土低温力学特性及井眼坍塌风险分析

为解决极地冻土区油气资源储量极大但其力学特性和钻井井壁失稳机理尚不清晰的问题,对冻土岩样开展低温三轴力学特性实验,并基于此开展钻井井壁坍塌失稳相关数值模拟分析.结果表明:冻土的极限强度会随温度的降低和围压的增大而逐渐提高;冻土弹性模量尽管会随温度的降低而增加,但受围压影响较小,而泊松比基本不受温度及围压的影响;冻土内聚...     

某复合型地铁车站站台防排烟方案研究

在地铁站台火灾中,机械排烟和补风对于有效排出站台烟气至关重要,地铁设计规范要求采用正压送风方式来防止烟气经扶梯和楼梯流入站厅层。对于复合型地铁站台而言,站厅层可能与其它建筑共用,建筑面积较大,难以提供足够的风压进行正压送风。本文利用性能化防火设计方法对多种站台防排烟方案进行研究,并提出了分析流程。本文还针对某实际工程案例验证了这一流程的可行性,并据此选择了一种将机械排烟和补风有机结合的防排烟方案。本文的研究工作对其它类型地铁站台防排烟方案具有参考价值。     

锂电池检测的安全标准及安全防护研究

为评估并提高锂电池在使用、储存和运输过程中的安全,本文归纳总结了国内外锂电池安全检测的相关标准,对标准中测试项目异同作了重点分析和对比,并讨论了锂电池的安全风险及风险分级情况。同时,鉴于锂电池检测过程中可能出现的起火、爆炸等危险,探讨了电池检测过程的安全防护技术,并从样品区和试验区两方面提出了安全防护要求和建议。     

环境检测中地表水检测现状及进展

地表水作为维持人类正常生产生活的重要资源,应作为环境监测的首要任务常抓不懈。现今对地表水的检测工作中仍存在较多不完善之处,应从环境保护的大局出发,应用合理的检测技术,将地表水检测工作提升到新的高度。本文分析了环境检测中地表水的检测现状,并提出了相应的解决措施。     

环境检测的作用及环保措施分析

本文对环境检测的作用进行了总结,包括环境检测是环境影响评价的基础、环境检测是环境保护的依据、环境检测促进环境管理工作等,提出了环境保护措施,需要增加资金投入力度、完善环境检测法律保障体系、合理使用环境检测新技术、构建环境检测质量控制体系、完善环境监管保护方法来有效地保护环境,提升人们的生活质量。     

BIM技术在钢结构建筑抗震减灾管理中的应用

为提高钢结构建筑抗震减灾性能,降低建筑坍塌风险,研究BIM技术在钢结构建筑抗震减灾管理中的应用方法是非常必要的.利用BIM技术在钢结构建筑整体建造中的动态建模、可视化、信息共享管理以及抗震减灾性能检测等优势,在建筑抗震减灾管理决策阶段,选出最优方案,针对方案中影响建筑抗震减灾性能风险制定管理策略;在设计阶段,创建三维建...     

Effects of falling weight impact on industrial safety helmets used in conjunction with eye and face protection devices

Industrial workplaces pose concurrent hazards to the upper part of the head and the eyes. Under the circumstances, workers may use protective helmets in conjunction with protective goggles or spectacles. In order to assess the compatibility of this equipment, a method and a test stand for evaluating the behavior of safety helmets and protective goggles/spectacles upon the impact of a falling weight were designed. The results of tests concerning the displacement and deformation of helmets and spectacles/goggles, the forces acting on the helmets, as well as the forces exerted by the spectacles/goggles on the headform upon falling weight impact are presented. The results revealed the ways in which the tested equipment interacted with each other. The influence of equipment construction on the test results was analyzed and inferences concerning the safety of the studied protective devices were made. Some general construction guidelines were formulated for the compatibility of the equipment.     

分段变速加载对含瓦斯突出煤力学特性影响试验研究

为探究采动应力变化对含瓦斯突出煤力学特性的影响,利用RLW-500G煤岩三轴蠕变-渗流试验系统,对新景矿含瓦斯突出煤进行了不同围压和瓦斯压力下的常规三轴和分段变速加载力学试验。结果表明:煤样在2种应力路径下的全应力应变曲线均可分为压密、线弹性、塑性变形、应力跌落和残余应力5个阶段;随着围压的升高或者瓦斯压力的降低,煤体在2种应力路径下的强度和弹性模量均增大;相较于常规三轴,煤体在分段变速加载路径下的强度普遍增大,峰值轴向应变、峰值环向应变绝对值和峰值体积应变绝对值也普遍增大,失稳破坏瞬间应力跌落和能量释放更加剧烈。Mohr-Coulomb强度准则仍然适用于分段变速加载条件下的含瓦斯突出煤,该研究对于认识煤与瓦斯突出的发生机制具有一定的指导意义。     

道路车辆电气及电子设备在振动试验中的应力循环和试验设计原则

本文试从振动试验的特点和受试样品承受振动激励的应力循环切入分析,为把握试验方案的拟订提供支持。同时也简要介绍了应力循环的计算方法,供试验人员参考使用。     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.