水体中苯与亚硝酸的紫外光解交叉反应机理研究

利用激光闪光光解技术对不同条件下苯与亚硝酸水溶液的交叉反应机理进行研究,考察了瞬态物种的生长与衰减等行为;得到了C6H6-OH加合物,C6H6-NO^ π络合物等中间产物,并结合其光解产物的GC／MS分析,对其可能的反应机理进行了探讨,得出了一些微观反应速率常数．     

聚合物驱采出水处理工艺研究

聚合物驱油技术在大庆油田得到广泛应用,由于采出水粘度大、油珠粒径小,其处理难度大于油田常规水驱采出水。通过对聚合物驱采出水的特性分析,并在现场分别进行了以横向流除油器(串联DTH聚结器)和水力旋流器为主体的工艺试验。其工艺参数分别为:横向流除油器和DTH聚结除油器的处理量均为85 m3/h,有效停留时间为2.4 h。过滤器为石英砂、磁铁矿双层滤料,处理量为20 m3/h,过滤周期24 h,反冲洗时间为15 min,一次和二次过滤的滤速分别为12 m3/h和8 m3/h。试验结果表明:两种工艺均可代替现有的沉降过滤工艺处理聚合物驱采出水。     

絮凝剂XN98处理油田聚合物驱含油污水

通过筛选复配得到絮凝剂XN98,该絮凝剂由五种成分组成,其中以无机絮凝剂为主,含有少量有机絮凝剂。该絮凝剂处理油田聚合物驱含油污水效果良好,絮凝剂用量为50 mg/L时,处理后水质可以达到中、高渗透层含聚污水处理指标。絮凝剂XN98处理聚合物驱污水的药剂成本约为0.2元/t,约为PAC（聚铝）的三分之一。     

一种新型除尘器在梅山铁矿选厂的应用

介绍了喷雾双向旋流除尘器的原理及在矿山选厂除尘中的应用。     

Closed-loop supply chain system with energy,transportation and waste disposal costs

Energy usage and consumption play important and strategic roles in modern manufacturing, inventory and logistics systems. The literature on inventory models for closed-loop supply chains reveals that, for no clear reasons, energy costs were ignored along with transportation and disposal costs. This paper introduces a closed-loop supply chain model that considers the economic value and energy content of products. It also offers a novel framework for studying lot-sizing policies of production processes in that context. Thus, a mathematical model for a closed-loop supply chain system with energy, transportation and disposal costs is developed. Numerical examples are provided with their results discussed. The developed model was also compared to that of Richter (1996) to stress the importance of accounting for the three noted costs. The numerical results emphasise that accounting for energy, transportation and disposal costs in supply chain modelling increases the sustainability of a production-inventory system due to the strong interdependence of the three costs on one hand, and their relationship to the environment on the other hand.     

Sustainable polymer composites: immiscible blends prepared by extrusion of poly(trimethylene terephthalate) and polyamide6,10 with high bio-based content

Components for binary polymer blends were sought to produce an immiscible blend of improved renewable character and with good structural properties. The poly(trimethylene terephthalate) and polyamide6,10 system was selected based on the molecular structure of the molecules and the bio-based origin of the feedstocks. A preliminary study of three compositions in this system demonstrated the similar thermal properties of the two polymers as measured by differential scanning calorimetry (DSC) and the ability of these polymers to be processed together in conventional extrusion equipment to produce blends with micrometer-scale domains. Dispersed phases were observed by electron microscopy near the end members. Available viscosity data and the appearance of columnar blends at the 50/50 composition suggest the possibility of co-continuous blends in close proximity to this composition.     

A Contribution to the Study of the Antidust Respirators’ Real Performance

In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance.     

二元驱污水配聚黏损影响因素分析及控制方法

含油污水中活泼金属离子会对聚合物产生不同程度的降解,导致注入液的黏度损失较大。室内试验表明:水中二价铁、二价硫及硫化亚铁在溶解氧存在的情况下,均会大幅降低聚合物溶液的黏度,0.5mg/L的二价铁或二价硫、1mg/L的硫化亚铁,黏度损失在15%左右。溶解氧为5.17mg/L时,加入9mg/L的二价铁,聚合物溶液的黏度仅为5.48mPa.s,黏度损失超过95%。为减少上述因素对聚合物黏度的影响,利用陈化法、曝气法及化学氧化法等方法均能有效降低含油污水配聚过程中的黏度损失率。     

自然通风对学生宿舍室内苯污染影响的数值模拟

为降低健康风险,采用计算流体力学数值模拟方法,研究了4种不同通风工况对学生宿舍室内苯污染的影响,讨论了室内苯浓度、气流速度矢量与空气龄分布。结果表明：自然通风对于室内苯污染的去除效果明显,进出风口的位置与大小会影响室内气流分布,良好的气流组织更有利于室内污染物的及时排出;出风口对于室内污染物的排出影响较大,增大出风口的面积有利于苯的排出,能更加有效地降低室内苯污染;进风口对室内空气龄影响明显,增大进风口面积能有效提高室内空气的新鲜程度,有利于室内苯污染的稀释,提高学生宿舍室内空气品质。     

环境保护项目费用效益评价方法

从费用—效益分析原理出发,结合微观经济理论及环保项目特点,通过分析与归纳建立环保项目费用效益量化评价模型,落实费用效益分析法在环保项目经济评价中的具体应用,达到得以对环保项目作出经济分析评价的目的。