包套轧制复合法制备TA1/LY12复合板

对5座高山电视塔在自然环境下金属腐蚀与防护进行了调查和分析研究，寻求其规律性，以便在今后建设中有针对性地改进抗蚀措施，提高并延长其结构使用寿命，更好地为广播电视宣传服务。     

楔横轧变形接触面的螺旋面方程及其应用

建立了楔横轧变形工件与模具接触面的旋转螺旋面方程。利用新方程求解工程问题,其结果比用传统的用圆锥曲面近似求解有明显改善。螺旋面方程的建立为楔横轧工程问题的精确求解创造了条件。对于研究楔横轧理论。提高工艺水平有一定的促进作用。     

电子束净化烟气机理探讨

探讨了电子束法净化电厂烟道气过程中自由粒子的产生以及SO2与NOx的脱除机理。结果表明:SO2的脱除有两条途径——热化学和辐射化学,在当量氨的存在下,热化学起主导作用;脱除NOx的过程则纯粹是辐射诱发的氧化-还原反应。     

金钟藤的年轮生长量与气候因子的相互关系

分析了金钟藤(Merremiaboisiana(Gagn.)vanOoststr.)的年轮特征,并探讨了它与温度等气候因子的关系。金钟藤的年轮极不规则,有许多自然隆起和裂缝。金钟藤的年轮生长量通过格子法来估算。结果表明金钟藤年轮的年平均生长量与温度呈极显著正相关,与降水、日照时数和相对湿度相关性不显著。罗浮山地区降水和日照时数基本能够满足金钟藤的生长,结合相关研究结果推测:温度可能是金钟藤快速生长的主要驱动因子。     

轧钢废水全循环综合利用经济效益分析

轧钢厂废水全循环综合利用改造项目的确定，从项目设备投资，运转费用投资以及项目建成后节约用水，减少排污费等方面，阐述微观产生的经济效益，宏观产生的环境效益，揭示了该项目带来的积极影响。     

Prenatal diagnosis of ring chromosome 6

An amniocentesis was performed on a gravida 1, para 0 23-year-old female because of high maternal serum alpha-fetoprotein and nuchal thickening/cystic mass apparent on the fetal ultrasound. Detailed ultrasound examination revealed multiple anomalies including brain abnormalities. The fetus was found to have a mosaic female karyotype: 45,XX, - 6/46,XX,r(6) (p25q27) (62 per cent:38 per cent). This is the first report of a prenatally diagnosed case of ring chromosome 6.     

苯胺水溶液的电子束辐照降解

以苯胺类化合物中的苯胺为具体对象,进行了苯胺水溶液受到电子束辐照后的降解过程和特性研究,分别考察了吸收剂量、溶液初始浓度、溶液初始pH和过氧化氢加入量等因素对苯胺辐照降解效果的影响.实验结果表明,电子束辐照可以有效降解水溶液中的苯胺,当苯胺初始浓度为70 mg·L-1,吸收剂量为23.7 kGy时,苯胺降解率可达91%,COD去除率可达27%.过氧化氢的加入能够明显地提高苯胺的降解效果,COD去除率最高可达98%.溶液初始pH在2.0～11.0范围内,pH对苯胺的辐射降解影响较小.     

High beam headlamp use rates: Effects of rurality,proximity of other traffic,and roadway curvature

Objective: The few observational studies of the prevalence of high beam use indicate the rate of high beam use is about 25% when vehicles are isolated from other vehicles on unlit roads. Recent studies were limited to 2-lane rural roads and used measurement methods that likely overestimated use. The current study examined factors associated with the rate of high beam use of isolated vehicles on a variety of roadways in the Ann Arbor, Michigan area.

Methods: Twenty observation sites were categorized as urban, rural, or on a rural/urban boundary and selected to estimate the effects of street lighting, road curvature, and direction of travel relative to the city on high beam use. Sites were selected in pairs so that a majority of traffic passing one site also passed through the other. Measurement of high beams relied on video data recorded for 2 nights at each site, and the video data also were used to derive a precise measure of the proximity of other traffic. Nearly 3,200 isolated vehicles (10 s or longer from other vehicles) were observed, representing 1,500-plus vehicle pairs.

Results: Across the sample, 18% of the vehicles used high beams. Seventy-three percent of the 1,500-plus vehicle pairs used low beams at each paired site, whereas 9% used high beams at both sites. Vehicles at rural sites and sites at the boundaries of Ann Arbor were more likely to use high beams than vehicles at urban sites, but use in rural areas compared with rural/urban boundary areas did not vary significantly. Rates at all sites were much lower than expected, ranging from 0.9 to 52.9%. High beam use generally increased with greater time between subject vehicles and leading vehicles and vehicles in the opposing lane. There were mixed findings associated with street lighting, road curvature, and direction of travel relative to the city.

Conclusion: Maximizing visibility available to drivers from headlights includes addressing the substantial underuse of high beam headlamps. Advanced technologies such as high beam assist, which switches automatically between high and low beam headlamps depending on the presence of other traffic, can help to address this problem.     

某型橡胶密封圈加速贮存试验设计与实践

目的针对某型橡胶密封圈开展加速贮存试验设计,并通过试验预测产品贮存寿命。方法通过分析橡胶密封圈在贮存使用环境下的失效机理,结合橡胶材料性能老化模型,在不改变失效机理、又不增加新的失效机理的前提下,以密封圈整件作为试验对象,用加大温度应力的试验方法加速产品失效过程,根据试验结果预计正常环境应力下的产品贮存寿命。结果采用温度应力作为加速贮存应力开展密封圈加速贮存试验方案设计和验证工作,评估得到其在贮存温度为20℃的环境中,贮存寿命可以达到16.97年,置信度大于0.95。结论以密封圈整件作为试验件,采用温度应力作为贮存敏感应力开展加速贮存试验,所评估得到的贮存寿命与产品已有的自然贮存寿命结果吻合得较好,试验状态更加真实,为橡胶密封圈更换周期提供参考依据,并为密封圈贮存寿命的定量评估提供了一种参考方法。     

在用吊运熔融金属起重机主起升钢丝绳缠绕系统的优化研究

结合最新的相关安全规程要求,通过对在用吊运熔融金属起重机钢丝绳缠绕系统的分析、研究,依据起重机械设计规范,对不同工况下钢丝绳缠绕系统分别提出两套优化方案,并通过实际应用情况验证优化方案的可行性。