La掺杂TiO2/有机改性膨润土对TNT弹药废水的光催化降解性能研究

利用超声强化溶胶-凝胶法制备了La掺杂TiO2/有机改性膨润土复合光催化材料并进行了结构表征;以弹药废水中主要污染物质TNT作为目标物,考察了影响光催化降解性能的因素.结果表明：有机改性后复合材料的吸附性能和光催化性能均有所增加,对TNT的60min的吸附去除率和光催化降解率分别达到9.68％和94.53％;影响TNT光催化降解率的因素有光照时间、催化剂用量、TNT初始浓度、溶液pH值和光照强度.     

污水处理厂微孔曝气器选型的探讨

曝气器是污水处理厂的核心设备。目前广泛运用的鼓风机微孔曝气是一种高效节能的曝气方式。选择适当的微孔曝气器是非常重要的,不仅保障污水处理效果稳定,运行成本较低,还能节省设备投资和维护费用。结合微孔曝气器在污水处理厂的运用效果,分析了各种微孔曝气器的性能、特点和优劣,并对污水处理厂微孔曝气器的选型进行了探讨。     

改性硅藻土陶瓷生物膜载体的制备及性能研究

主要对硅藻土的烧结改性进行了进一步的研究,并对改性硅藻土用于污水处理系统生物膜的载体制作进行参数研究。通过设置适宜的污水水力学特性、良好的载体挂膜性能表征、实验运行稳定性等多方面进行对比实验,得出最佳生物膜挂膜性能的改性硅藻土陶瓷生物膜载体。     

温拌阻燃沥青混合料阻燃效果评价

通过氧指数、质量损失率及路用性能试验,研究EC130温拌剂、FRMAX型阻燃剂对沥青混合料阻燃效果的影响。试验结果显示,相比普通沥青混合料,阻燃沥青混合料、温拌阻燃沥青混合料氧指数分别增加23.3%、25.6%,质量损失率减小28.0%、32.0%,残留动稳定度增加14.0%、16.1%,残留最大弯拉应变增加14.1%、17.1%,冻融劈裂强度比增加5.3%、9.0%。相比普通沥青路面,阻燃沥青路面、温拌阻燃沥青路面发生火灾时能够减少34.0%、41.1%的毒害气体生成,并减少路面修补所需的混合料质量。其次得出普通沥青路面、阻燃沥青路面及温拌阻燃沥青路面的质量损失率、残留动稳定度、残留最大弯拉应变、残留冻融劈裂强度比与燃烧时间的关系模型。结果表明:阻燃剂对沥青混合料的阻燃效果显著;温拌剂有助于阻燃剂更好地发挥阻燃作用,降低火灾对道路的破坏,降低隧道火灾发生时有害气体的生成,提升隧道安全性。     

计算机模拟警戒作业疲劳与绩效测量实验设计*

为探索警戒作业工间休息机制,设计计算机模拟监控警戒作业实验研究疲劳与绩效之间的关系。通过对9个时间单元绩效数据的两两比较,发现原有实验方案存在不合理性。分析心理厌倦和暂时性注意缺失对作业绩效的干扰,找出问题根源。通过调整任务界面和参数、增加声音警示音、设置时间进度条、加强实验前自我检查和培训环节对实验方案进行改进,并检验改进效果。结果表明:改进后实验方案产生的数据能客观描述监控警戒作业疲劳与绩效之间的关系,实验结论可为设计警戒作业工间休息制度提供理论依据。     

石油生物脱硫技术研究进展

生物脱硫技术由于具有条件温和、能耗低等优势受到人们关注。对生物脱硫新型微生物的筛选方向、生物脱硫技术中脱硫菌生长以及脱硫限制、传质限制等因素及其近期研究进展等方面进行了介绍,以期促进生物脱硫技术的研究深度。     

羧化CTS微球对共存有机污染物的吸附研究

采用反相悬浮法制备交联羧甲基化壳聚糖微球,并用高效液相色谱法-紫外检测研究了改性壳聚糖微球对共存有机污染物的吸附。试验了吸附时间、溶液pH值、有机物的浓度等因素对水中共存有机污染物吸附的影响。结果表明,在有机物浓度相近的情况下,羧化改性壳聚糖微球对水中2,4-二硝基酚的去除量最大。     

粉煤灰多孔陶粒在水处理中的应用研究

研究采用电厂的粉煤灰为主要原料制备多孔陶粒,分别将其用作水处理中的微生物载体和吸附剂。挂膜结果表明:COD、氨氮这两项指标的出水基本稳定,去除率高。用多孔陶粒作吸附剂处理含铬废水时,等温吸附实验表明,多孔陶粒吸附水中的铬的等温方程基本符合Langmiur等温方程式,在pH值为酸性时对铬的去除率较高。用HCl和NaOH溶液再生多孔陶粒,酸的效果更好。     

Sensitivity of some groups of ordinary chernozem soil microorganisms to γ irradiation

The effect of γ irradiation at doses of 1, 5, 10, and 20 kGy on the microflora of ordinary chernozem soil has been studied. The time course of the restoration of the microorganism numbers over 180 days after γ irradiation has been studied in model experiments. The microorganism radioresistance decreases in the following order: amylolytic bacteria > Azotobacter > spore-forming bacteria > ammonifiers > micromycetes. A dose of 20 kGy has a 96% suppressing effect on all microorganisms. Model experiments on the restoration of the irradiated soil microflora have revealed different rates of increase in the numbers of microorganism groups depending on the dose and incubation time.     

Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.