不锈钢板式热沉传热特性的实验与模拟研究

目的 研究流量、胀高及焊点排布方式对不锈钢板式热沉传热特性的影响。方法 搭建实验平台,加工出结构参数不同的板式热沉实验件,同时采用静力隐式算法建立相应的几何模型,通过实验与数值模拟相结合的方法,研究流量、胀高和焊点排布方式的变化对板式热沉热阻的影响规律,并分析热沉流道内部流场状态。结果 首先计算了6个工况下的热阻,发现实际换热量为540 W时,数值模拟与实验结果的最大相对误差不大于25%。然后分析了误差来源,最后得到了热沉全流道速度场与温度场的分布情况。结论 实验与模拟结果有较好的符合程度,证明了数值模拟方法的可靠性。在换热量相同时,板式热沉的热阻随流量与胀高的增大而减小,焊点为菱形排布的热沉传热性能相对更好。板式热沉内部的流场具有周期性,焊点使流体扰动增强,并形成射流和旋涡,起到了强化传热的效果。     

过电位抛光增材制造双极板流道结构及性能研究

目的 研究过电位抛光对不锈钢异形截面微流道内壁成形性及双极板性能的影响。方法 采用电化学实验、扫描电子显微镜（SEM）、粗糙度测试分别对激光粉末床熔融技术成形异形截面微流道进行测试分析,研究抛光时间对微流道内壁表面形貌、典型缺陷、表面粗糙度及双极板耐腐蚀性的影响。结果 在抛光前10 min,微流道内壁的质量得到有效提升,随着抛光时间的延长,其表面粗糙度达到稳定值,同时典型缺陷也由黏粉、半熔金属颗粒等局部缺陷逐渐变化到球化、挂渣、阶梯效应等大范围缺陷,直至出现点蚀现象。抛光时间在5～15 min内,LPBF成形316L不锈钢表面质量提升,随着抛光时间的增加,其耐腐蚀性下降。结论 采用过电位抛光工艺并选择适当的过电位抛光时间,能有效提升微流道内壁成形质量及双极板耐腐蚀性能。     

上海市社区内影响居民垃圾分类效果的关键措施指标研究

本研究依托复旦大学意愿—习惯垃圾分类行为理论对上海市不同区域、不同类型的55个社区进行大范围调研,识别出包括设施、志愿者、保洁员、启动、定时定点、租户、管理和绿色账号在内的8个社区内影响居民垃圾分类效果的关键措施指标,并且通过指标与社区实际分类效果的相关性结果证明了该指标体系的有效性。研究结果还表明,上海市社区内影响垃圾分类效果的最主要的措施指标是硬件设施、保洁人员、“定时定点”制度和志愿者。研究结果一方面可以供上海市基层政府人员使用指标体系来进行监督,另一方面也为社区因地制宜地采取措施来提高和巩固社区垃圾分类效果提供了具体的科学支撑。     

Direct protein-protein interaction network for insecticide resistance based on subcellular localization analysis in Drosophila melanogaster

Abstract

In present study, we constructed the direct protein-protein interaction network of insecticide resistance based on subcellular localization analysis. Totally 177 of 528 resistance proteins were identified and they were located in 11 subcellular localizations. We further analyzed topological properties of the network and the biological characteristics of resistance proteins, such as k-core, neighborhood connectivity, instability index and aliphatic index. They can be used to predict the key proteins and potential mechanisms from macro-perspective. The problem of resistance has not been solved fundamentally, because the development of new insecticides can’t keep pace with the development speed of resistance, and the lack of understanding of molecular mechanism of resistance. As the further analysis to reduce data noise, we constructed the direct protein-protein interaction network of insecticide resistance based on subcellular localization analysis. The interaction between proteins located at the same subcellular location belongs to direct interactions, thus eliminating indirect interaction. Totally 177 of 528 resistance proteins were identified and they were located in 11 subcellular localizations. We further analyzed topological properties of the network and the biological characteristics of resistance proteins, such as k-core, neighborhood connectivity, instability index and aliphatic index. They can be used to predict the hub proteins and potential mechanisms from macro-perspective. This is the first study to explore the insecticide resistance molecular mechanism of Drosophila melanogaster based on subcellular localization analysis. It can provide the bioinformatics foundation for further understanding the mechanisms of insecticide resistance. It also provides a reference for the study of molecular mechanism of insecticide resistance of other insects.     

Influences and mechanisms of nanofullerene on the horizontal transfer of plasmid-encoded antibiotic resistance genes between E. coli strains

• Sub-inhibitory levels of nC₆₀ promote conjugative transfer of ARGs. • nC₆₀ can induce ROS generation, oxidative stress and SOS response. • nC₆₀ can increase cell membrane permeability and alter gene expression. • Results provide evidence of nC₆₀ promoting antibiotic resistance dissemination. The spread and development of antibiotic resistance globally have led to severe public health problems. It has been shown that some non-antibiotic substances can also promote the diffusion and spread of antibiotic resistance genes (ARGs). Nanofullerene (nC₆₀) is a type of nanomaterial widely used around the world, and some studies have discovered both the biological toxicity and environmental toxicity of nC₆₀. In this study, cellular and molecular biology techniques were employed to investigate the influences of nC₆₀ at sub-minimum inhibitory concentrations (sub-MICs) on the conjugation of ARGs between the E. coli strains. Compared with the control group, nC₆₀ significantly increased the conjugation rates of ARGs by 1.32‒10.82 folds within the concentration range of 7.03‒1800 mg/L. This study further explored the mechanism of this phenomenon, finding that sub-MICs of nC₆₀ could induce the production of reactive oxygen species (ROS), trigger SOS-response and oxidative stress, affect the expression of outer membrane proteins (OMPs) genes, increase membrane permeability, and thus promote the occurrence of conjugation. This research enriches our understanding of the environmental toxicity of nC₆₀, raises our risk awareness toward nC₆₀, and may promote the more rational employment of nC₆₀ materials.     

2,4-dichlorophenoxyacetic acid (2,4-D) micropollutant herbicide removing from water using granular and powdered activated carbons: a comparison applied for water treatment and health safety

Abstract

Activated carbons are well-known porous materials as an effective adsorbent used for the removal of emerging contaminants, such as herbicides, which are increasingly present in water bodies. Most water treatment plants, specially in Brazil, are unable to completely remove such contaminants by the conventional process and advanced treatment using activated carbons is required. The aim of this paper was to verify the influence of the activated carbons granulometry and specific surface area on the 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide removal efficiency using distilled-deionized water and filtered water collected from a conventional Water Treatment Plant. Commercial activated carbons samples used in this work were obtained from two different manufacturers. Activated carbons were analyzed by the specific surface area, pore size and volume distribution, nuclear magnetic resonance, infrared and x-ray spectroscopy, moisture, volatile matter and ash contents. Batch adsorption isotherms experiments were used and performed by Langmuir and Freundlich models. Granular and powdered activated carbons removed over 99% of 2,4-D in distilled water and near to 99% using filtered water. The activated carbons evaluated in this work presented high performance and played a key role in water treatment by removing 2,4-D herbicide, ensuring the protection of human health and the ecosystem.     

Integration & assessment of recycling into c-Si photovoltaic module’s life cycle

Photovoltaic (PV) energy generation devices have experienced a vigorous growth in production over the last decade in all major industrialised countries. In this research paper, the assessment of recycling and subsequent production of new crystalline silicon (c-Si) PV modules taking advantage of the recovered Si in terms of industrial symbiosis is being examined. With the aid of life cycle analysis method, the potential payback is thoroughly examined through a scenario application in the second useful phase of the PV module. Furthermore, key environmental performance indicators have been implemented in order to evaluate power and resource demands.     

Possible Use of Ash Residues for the Construction of Artificial Reefs at Sea

Utilization of ash residues, including coal ash, oil ash, and municipal solid waste combustion ash, for the construction of artificial reefs at sea has been investigated by many researchers throughout the world for nearly 20 years. Both laboratory and field studies have shown that an artificial reef made of stabillized ash-concrete (SAC) has had no adverse effect on the marine environment. Indeed, published studies have shown that fish counts increase around SAC reefs owing to an abundance of colonizing organisms and to protection provided by cavities within the reef structures. However, public and regulatory resistance to the use of SAC for artificial reef construction at sea is still very strong in certain countries due to concern for possible negative environmental impacts, primarily in the area of bioaccumulation of elements or compounds originating from the ash component of SAC.

In this paper, technological feasibility of using ash residues for artificial reef construction is presented, based on the available 20 years of scientific data, including engineering workability, physical integrity, chemical leaching potential and biological effects. More important, we also identify conceptual barriers for the acceptance of using SAC for the construction of ocean reefs and suggest approaches to overcome these barriers.     

下扬子地区分区走时表及计算机查表实用程序的编制

一般地震走时表是由一定间隔震中距查算各震相走时。本文所介绍的根据P与S波走时差值由计算机实时快速编制和查算区域地震走时表的方法和程序,适用于震源在壳内任意深度,可含低速层的水平均匀分层模型。此外,本文还给出了下扬子三个分区、三种深度的走时表,以供没有计算机的台站或地震现场作精细定位之用。     

农药的环境问题及发展动向

本文综述了农药对环境的污染,以及昆虫对农药产生的抗性。报道了农药最近的研究动向。