基因工程菌在厌氧膜生物反应器中对偶氮染料废水的脱色

印染和染料废水色度大,COD高,可生化性差.采用基因工程菌Escherichia coli JM109(pGEX-AZR)在厌氧膜生物反应器中,对模拟偶氮染料废水进行脱色研究.结果表明,系统对酸性红B有很好的脱色能力,且启动期短,脱色效率高,脱色率稳定在95%以上,对COD的去除率能达到68%.系统运行过程中,反应器内生物量稳定在0.4 g/L.EPS与生物量变化趋势一致,先升高后降低;pH值在运行初期由6.5降至6.2,后维持在6.6左右.系统运行27 d后进行第一次膜清洗,膜通量恢复为初始值的92%,系统运行周期约为26 d.     

基于应变模态差的海洋平台构件的损伤识别研究

对于具有一定损伤的导管式海洋平台钢管梁来说,实验模态分析得到的位移模态和固有频率难以有效的反应结构损伤的实际状况,特别是对早期的轻微损伤。为了提高损伤识别的效率和效果,根据海洋平台钢管梁架的受力特点,由节点位移模态推到出节点应变模态。然后利用损伤前后的应变模态差作为损伤识别的指标。将这个指标用在海洋平台钢梁构件焊缝和跨中单元的损伤识别上。通过建立钢管梁焊缝损伤的ANSYS模型,进行数据模拟分析,该方法能够在低阶模态条件下,有效的识别早期的轻微损伤。     

不同强度岩石中开挖圆形巷道的局部化过程模拟

利用FLAC模拟了不同粘聚力条件下圆形巷道的局部化过程。为了模拟巷道开挖,利用编写的F ISH函数删除巷道内部的单元。岩石服从莫尔库仑剪破坏与拉破坏复合的破坏准则,破坏之后呈现应变软化-理想塑性行为。文中模拟分为3步:首先,将静水压力施加在模型上,直到达到静力平衡状态;然后,利用编写的F ISH函数开挖巷道;最后,计算重新开始,直到达到静力平衡状态或者塑性流动状态。模拟结果表明,随着粘聚力的降低,巷道围岩的破坏模式首先由孔壁附近零星单元的破坏向4个对称的小V形坑式剪切破坏转变,然后由包含若干小V形坑的大V形坑式剪切破坏向巷道全断面的破坏转变。前三者破坏发生后,巷道围岩仍然能保持稳定。与最大塑性拉伸应变相比,最大剪切应变增量、最大塑性剪切应变要高得多;最大剪切应变增量、最大塑性剪切应变相差不大;随着粘聚力的增加,三者均越来越小。     

人体热应变预测方法标准在热安全评价中的应用

工业生产中存在着大量的高温工作环境,如高温生产车间或夏季露天作业环境等。高温工作环境可能导致人体体温升高、出汗脱水,对人体安全造成危害。建立人体热生理响应模型,通过计算得出人体生理指标变化,从而判断人体安全状态,是有效的人体安全评价方法。ISO 7933是人体热应变计算方法的国际标准。在考虑了环境和人体的多种情况下,给出人体相关生理参数的计算方法。基于此方法,与人体热安全阈值相结合,建立人体热安全评价方法,并给出了典型热环境下的算例。该方法也可用于评价热防护服的有效性。     

Experimental evidence for the effects of task repetitiveness on mental strain and objective work performance

People frequently have to work in high repetitive jobs. Previous research has focused exclusively on the effects of task repetitiveness on well‐being, while neglecting effects on work performance. In the present study, we aimed to fill this void by conducting two workplace simulations with experimental manipulations of task repetitiveness. Participants worked for about 5 hours at either a computer workstation, compiling computer hardware packages according to customer requests (Experiment 1, N = 160), or at an assembly line, piecing together equipment sets for furniture (Experiment 2, N = 213). Both experiments provide consistent evidence that high repetitiveness has a detrimental effect on well‐being, whereas work performance increases under conditions of high repetitiveness. On a practical level, our study hence shows that high task repetitiveness is a double‐edged sword for both employees and organizations. On a conceptual level, our findings emphasize the necessity to account for both mental strain and work performance when examining the effects of task repetitiveness. Copyright © 2014 John Wiley & Sons, Ltd.     

单元模态应变能法在输电铁塔损伤识别中的应用

输电塔结构在灾害中发生倒塌的现象时有发生,故而对输电塔结构进行健康监测具有重要的实际意义。介绍了单元模态应变损伤指数(EMSDI)在结构损伤识别中的表达式,并将其应用于输电铁塔模型试验中。采用单元形函数代替原有模态曲率计算方法,可有效降低计算单元模态应变能的计算误差,从而增加了识别的准确性。在输电铁塔仿真模拟和试验中,对该识别方法的准确性和可靠性进行了验证。实例表明:单元模态应变损伤指数法能够准确地识别出结构的损伤位置,并可在某种程度上反映出损伤程度,可以应用到实际输电塔结构损伤识别中。     

一株产耐热纤维素酶菌株的筛选及酶学性质

采用纤维素刚果红平板法从大田蘑菇种植场建堆的稻草样中分离得到了1株能产具有较好温度耐受性和pH稳定性的纤维素酶的放线菌DY3.综合形态、生理生化特征以及16S rDNA序列分析,将其初步鉴定为嗜热裂孢菌(Thermobifida fusca).对该菌所产纤维素酶的性质研究表明:最适催化温度为65℃,在70℃保温60 min后仍有75%以上的活力;最适催化pH为7.5,在pH 5.5～10.0之间该酶的稳定性较好,pH 10.0的条件下仍有80%的活力;最适作用底物是羧甲基纤维素钠.研究可为木质纤维素的生物预处理提供一定参考价值.     

Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

Effectiveness of a Light-Weight Ice-Vest for Body Cooling While Wearing Fire Fighter’s Protective Clothing in the Heat

The aim of the study was to examine the effects of wearing an ice-vest (ca 1 kg) on physiological and subjective responses in fire fighters. The experiments were carried out on a treadmill in a hot-dry environment. The physical cooling effect of the ice-vest was measured with a thermal manikin. The ice-vest effectively reduced skin temperatures under the vest. On average, heart rate was 10 beats/min lower, the amount of sweating was reduced by 13%, and subjective sensations of effort and warmth were lower during work with the ice-vest compared to work without it. Thermal manikin tests indicated that the useful energy available from the vest for body cooling was rather high (58%). In conclusion, the ice-vest reduces physiological and subjective strain responses during heavy work in the heat, and may promote efficient work time by 10%.     

大气环境下风电塔筒金属材料的应力腐蚀

塔筒金属材料在大气中的应力腐蚀会导致脆性断裂,从而对产生严重的后果。本文重点论述了应力腐蚀的几种腐蚀机理以及Cl-对应力腐蚀的影响,并介绍了应用较广的慢应力速率试验方法。