Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

基于CA的城市形态扩展多解模拟——以北京市东部平原区情景分析为例

构建了一个基于人工神经网络的约束型城市扩展CA模型。利用该模型,预测了北京市东部平原区在3种情景规划之下的未来50年的城市形态,为不同的城市发展模式之间的比较分析奠定基础。然后以2024年的北京东部平原区模拟城市形态为基准,从自然生态功效、社会服务功效、经济利益功效3个方面对3种规划模式进行了情景分析,从而系统的比较了3种规划模式的复合生态功效,为城市规划决策提供有力的支持。     

生态位理论及其在城市竞争研究中的作用——以中原城市群为例

城市生态位作为生态学重要理论之一,可用于分析城市群内部不同城市间竞争、演化等现象。以中原城市群9个省辖市为基本单元,运用生态位理论模型,进行多指标的综合加权和聚类分析,得出如下结论:(1)就中原城市群整体而言,城市生态位偏低且呈现明显的层次分异;(2)中原城市群城市生态位空间分异表现复杂。综合城市生态位、自然生态位及人口生态位空间分异并不明显,而经济生态位和社会生态位空间分异却十分显著,其中经济生态位最为显著;(3)中原城市群缺少4个子系统都具有优势特征的城市,只有郑州独具2项优势特征,但其自然生态位较低,自然生态位是郑州城市生态位的限制性因子。     

气象激光雷达的城市边界层探测

为了研究城市边界层结构变化特征,2005年7月利用气象激光雷达在南京城区做了城市边界层探测试验,就此次观测试验作了简要叙述并选取部分观测资料为示例,着重对气象激光雷达确定城市边界层高度垂直分布及逐时变化以及地面气象环境对边界层的日变化影响进行了初步分析.结果表明,主要由近地层对流混合形成的城市边界层高度具有典型的日变化特点,早晚比较低,日间有一个从低到高再到低的变化过程.提出了一种由边界层混合状态确定边界层高度的方法.分析结果表明,由气溶胶消光系数确定城市边界层高度比较准确.将MSL探测结果与同步的低空无线电探测仪的温度探测结果进行比较,结果表明,两者获得的实际廓线分布相当吻合,线性良好.就地表温度、辐射、湿度及云等气象要素对边界层垂直分布及时间变化的影响做了分析.结果表明,这些气象要素的分布对城市边界层高度的垂直分布及其逐时变化有明显影响.     

哈尔滨松北区城市湿地土壤抗侵蚀效益价值估算

城市湿地是城市生态系统的重要组成部分,在土壤抗侵蚀方面起重要作用.以哈尔滨松北区城市湿地为研究对象,在哈尔滨松北区湿地的西区、中区及东区沿线共布设采样点3个.哈尔滨松北区城市湿地土壤抗侵蚀效益价值通过湿地减少土地废弃、河道淤积和土壤中肥力流失三方面的价值来估算.结果表明:哈尔滨市松北区城市湿地保护土壤、减少土壤侵蚀的总效益价值为1.900×107元/a;湿地土壤在抗侵蚀效益中的贡献率占总效益的1/5,其效益价值为3.800×106元/a.      

武汉汉阳地区城市集水区尺度降雨径流污染过程与排放特征

2005年4月至8月对武汉市汉阳地区十里铺集水区进行了8次径流污染过程的水量、水质研究.结果表明,城市集水区尺度径流污染过程是降雨径流对整个集水区地表、排水系统中累积污染物的冲刷、携带过程,受集水区累积污染物数量、污染物可冲刷性和降雨径流特征的共同影响.城市降雨径流中初期污染物浓度显著高于后期,污染物浓度的峰值提前于径流的峰值,具有明显的初期冲刷效应.8次监测结果的算术平均值,初期5 mm、10 mm和15 mm降雨径流中TSS的负荷分别占总负荷的48%、68%和78%.初期径流中TSS的负荷与晴天累积天数呈线性正相关关系.     

城市环境地球化学调查研究方法综述

总结了城市环境地球化学调查的技术路线,论述了城市环境地球化学解释的思路和方法,提出了城市环境地球化学调查研究的重点问题及研究方向,为开展城市环境调查和评价工作提供了有参考价值的研究线索。     

两种改良型活性污泥法在城市污水处理中的比较

介绍了2种改良型活性污泥法———氧化沟工艺和百乐克工艺的特点,并针对2种工艺实际应用中的情况,分析2种工艺在今后发展应用中的趋势。     

Applying Integrated Urban Water Management Concepts: A Review of Australian Experience

This article explores recent Australian experiences in the application of the concept of integrated urban water management (IUWM) to land development sites through the review of 15 case studies. It discusses lUWM’s emergence and comments on the success or otherwise of Australian experience in its application. The understanding of IUWM is maturing within the Australian water industry, an occurrence that has been facilitated by demonstration sites such as those reviewed. Successes include the translation of IUWM concepts into well-functioning operational urban developments, significant reductions in the impact of the urban developments on the total water cycle, and the increasing acceptance of the concept within the water and land development industries. However, there is still room for greater integration of the water supply, stormwater, and wastewater components of the urban water cycle, improved dissemination of knowledge, enhancement of skills in both public and private organisations, and monitoring the performance of systems and technologies.     

塘-人工湿地生态系统处理城市地表径流的初期运行

以武汉市桃花岛塘和人工湿地组合生态处理系统为研究对象,探讨了该系统处理城市地表径流的初期运行,结果表明:塘和人工湿地组合生态系统可以有效的处理城市地表径流,复合潜流人工湿地系统具有独特的除氮效果。