PSO和SVM混合算法确定太湖入湖河流水质主要影响因子

以影响太湖入湖河流水质的24个因子值为研究对象,将PSO算法与SVM算法相结合。PSO算法用于优化SVM算法的参数c和g,以利于快速、高效地确定c和g的全局最优值;SVM算法基于最优的c和g,分别以24,21,18,15,12,9和6个因子作为特征向量预测水质的污染程度。结果表明,当特征向量为9个影响因子时预测率最高。其参数c=18.56,g=1.35,对应的预测率为：全局预测率92.59%,重度污染水质预测率88.89%,轻度污染水质预测率94.45%。因此,通过PSO和SVM混合算法,可以确定影响太湖入湖河流水质的主要因子,利用这些主要因子对水质进行预测预警,不但可以节省时间,而且可以得到精确的结果。     

道路交通噪声自动监测应用探讨

结合城市道路路网状况及实际噪声监测数据和历史实验数据,对道路交通噪声自动监测数据的有效性、监测点位布设进行了研究,对道路交通噪声监测点位优化提出建议。     

基于尾涡强度的无人机与民机纵向安全间隔评估研究

为了解决无人机频频入侵机场净空,与民航客机发生危险接近的问题,以碰撞风险为量化指标,对无人机与民机需要保持的纵向安全间隔进行评估研究。分析民机尾涡流场对无人机运行的影响,利用Crow近场涡强度消散理论,得到实际尾迹影响区改进Reich碰撞模板,据此建立CNS/GPS性能环境下的纵向间隔评估模型,通过Matlab进行间隔值求解。研究结果表明:模型可以较为准确地反映民机起飞初始爬升阶段无人机尾随运行时导航性能和尾涡迹对所需最小间隔值的影响,并得到给定安全目标水平的计算结果。     

What matters for work engagement? A diary study on resources and the benefits of selective optimization with compensation for state work engagement

This diary study addresses the benefits of employees' daily use of selective optimization with compensation (SOC) for state work engagement. We hypothesized that day‐level SOC not only directly fosters work engagement but that SOC also reveals its beneficial effects for work engagement in interaction with both external and internal resources. Specifically, we proposed SOC substitutes for job control, role clarity, and state of being recovered, thus helping employees manage low daily levels of these resources. We tested our hypotheses with a sample of 138 employees who completed two daily surveys over a total of 545 workdays. Results of multilevel analyses revealed that SOC benefits work engagement in both proposed ways. First, day‐level SOC was positively related to state work engagement. Additionally, day‐level role clarity and state of being recovered predicted state work engagement, but day‐level job control did not. Second, SOC benefitted state work engagement by offsetting low levels of role clarity and being recovered, and by boosting job control in their respective relationships with work engagement. The results suggest that by using SOC at work, employees can actively enhance their own work engagement on a given workday. This knowledge provides promising starting points for the development of interventions.     

Features of fatal injuries in older cyclists in vehicle–bicycle accidents in Japan

Objective: The purpose of this study was to identify and better understand the features of fatal injuries in cyclists aged 75 years and over involved in collisions with either hood- or van-type vehicles.

Methods: This study investigated the fatal injuries of cyclists aged 75 years old and over by analyzing accident data. We focused on the body regions to which the fatal injury occurred using vehicle–bicycle accident data from the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. Using data from 2009 to 2013, we examined the frequency of fatally injured body region by gender, age, and actual vehicle travel speed. We investigated any significant differences in distributions of fatal injuries by body region for cyclists aged 75 years and over using chi-square tests to compare with cyclists in other age groups. We also investigated the cause of fatal head injuries, such as impact with a road surface or vehicle.

Results: The results indicated that head injuries were the most common cause of fatalities among the study group. At low vehicle travel speeds for both hood- and van-type vehicles, fatalities were most likely to be the result of head impacts against the road surface.

The percentage of fatalities following hip injuries was significantly higher for cyclists aged 75 years and over than for those aged 65–74 or 13–59 in impacts with hood-type vehicles. It was also higher for women than men in the over-75 age group in impacts with these vehicles.

Conclusions: For cyclists aged 75 years and over, wearing a helmet may be helpful to prevent head injuries in vehicle-to-cyclist accidents. It may also be helpful to introduce some safety measures to prevent hip injuries, given the higher level of fatalities following hip injury among all cyclists aged 75 and over, particularly women.     

基于改进粒子群算法和元胞自动机的城市扩张模拟——以南京为例

为合理利用多智能体算法解决城市扩张动态模拟问题,基于地理学理论和社会学规律对粒子群算法进行有针对性的改进,提出分段式粒子群算法(SPSO),并结合元胞自动机模拟复杂时空过程的能力,构建出适用于城市扩张模拟的地理元胞自动机SPSO-CA。在SPSO-CA中我们利用多时像的土地利用数据、交通路网数据和地形数据,挖掘出1995~2000年南京城市扩张的土地转换规则。再由此规则实现1995~2008年的南京市城市扩张过程的动态模拟。最后对比SPSO-CA、PSOCA及NULL模型结果得:SPSO-CA总精度86.3%,Kappa系数为0.792,Moran’s I为0.078,PSO-CA总精度83.6%,Kappa系数为0.755,Moran’s I为0.054,NULL模型总精度81.9%,Kappa系数为0.741,真实的Moran’s I为0.072。这表明无论是总精度还是空间一致性,SPSO-CA都优于PSO-CA和NULL模型,即用SPSO-CA模拟城市扩张是可行的。     

采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

Green and compatible industrial development in Western China

Western China has lagged a lot in terms of industrial structure and economic development,compared with the national average.And China announced its target of CO_2 emission reduction,i.e.by 2020,CO_2 emission per GDP will drop by40-45%compared with 2005.The target will be incorporated into China's long-term industrial planning.Against this background,this paper will make a comprehensive examination of the industrial development of Western China,aiming to discover a green and compatible way.First,we analyze the spatiotemporal evolution of regional industrial structure for the period 2000-2010.Second,we try to discover the industrial structure optimization path for Western China by employing the Vector Auto Regression model.Lastly,we try to provide some advice and suggestions for further industrial development in Western China.Our examination shows that further industrial development in Western China should pay full attention to resource conservation and recycling,and develop on a green and compatible path.     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.     

1000 MW燃煤机组电除尘深度节能技术研究及应用

电除尘设备在减少工业粉尘排放量、降低大气环境污染、保护生态环境等方面有着重要的作用,随着我国对节能减排工作的重视及环保要求的提高,保证其安全、稳定、经济、节能运行成为火电厂环保工作重点。对北仓电厂三期2×1000 MW机组电除尘电场供电方式优化、电除尘振打方式优化、电除尘闭环控制技术、电除尘高频电源技术、电除尘灰斗、瓷套蒸汽加热技术组合集成应用进行了研究,在确保除尘效率达到要求的情况下,降低运行电耗。相关的电除尘深度节能技术成果在国内同类型设备中具有一定的借鉴意义。