城市给水管网优化设计研究

研究了几种典型的城市给水管网优化设计数学模型,并给出了求解方法,指出在给水管网系统的优化设计中进一步完善广义简约(GRG)算法的必要性.     

Ecological scenarios analyzed and evaluated by a shallow lake model

We applied the complex ecosystem model EMMO, which was adopted to the shallow lake Müggelsee (Germany), in order to evaluate a large set of ecological scenarios. By means of EMMO, 33 scenarios and 17 indicators were defined to characterize their effects on the lake ecosystem. The indicators were based on model outputs of EMMO and can be separated into biological indicators, such as chlorophyll-a and cyanobacteria, and hydro-chemical indicators, such as phosphorus. The question to be solved was, what is the ranking of the scenarios based on their characterization by these 17 indicators? And how can we handle high quantities of complex data within evaluation procedures? The scenario evaluation was performed by partial order theory which, however, did not provide a clear result. By subsequently applying the hierarchical cluster analysis (complete linkage) it was possible to reduce the data matrix to indicator and scenario representatives. Even though this step implies losses of information, it simplifies the application of partial order theory and the post processing by METEOR. METEOR is derived from partial order theory and allows the stepwise aggregation of indicators, which subsequently leads to a distinct and clear decision. In the final evaluation result the best scenario was the one which defines a minimum nutrient input and no phosphorus release from the sediment while the worst scenario is characterized by a maximum nutrient input and extensive phosphorus release from the sediment. The reasonable and comprehensive results show that the combination of partial order, cluster analysis and METEOR can handle big amounts of data in a very clear and transparent way, and therefore is ideal in the context of complex ecosystem models, like that we applied.     

基于数字流域的水文过程模拟研究

考虑流域下垫面空间变异性,基于数字高程模型构建了数字流域,并在此基础上对描述流域水文物理过程的数学方法进行了探讨,文章认为,数字水文模型是一种有物理基础的包含大容量信息的现代模拟灌河实例研究表明,数字水文模型可以十分方便地输出水文要素和状态变量的空间分布与时间序列,这对充分利用现有观测信息进行水文信息的深层挖掘创新了条件。     

Semi-parametric statistical approaches for space-time process prediction

The problem of estimation and prediction of a spatial-temporal stochastic process, observed at regular times and irregularly in space, is considered. A mixed formulation involving a non- parametric component, accounting for a deterministic trend and the effect of exogenous variables, and a parametric component representing the purely spatio-temporal random variation is proposed. Correspondingly, a two-step procedure, first addressing the estimation of the non- parametric component, and then the estimation of the parametric component is developed from the residual series obtained, with spatial-temporal prediction being performed in terms of suitable spatial interpolation of the temporal variation structure. The proposed model formula-tion, together with the estimation and prediction procedure, are applied using a Gaussian ARMA structure for temporal modelling to space-time forecasting from real data of air pollution concentration levels in the region surrounding a power station in northwest Spain.     

HAN基ECSP凝胶模型的构建与分子动力学模拟

目的 从微观分子的角度对硝酸羟胺(HAN)基电控固体推进剂(Electrically Controlled Solid Propellants,ECSP)的性能参数进行模拟与计算。方法 利用分子表面静电势(ESP)对HAN分子2种可能的构型进行优化和稳定性分析。通过真空非周期性分子动力学模拟得到聚乙烯醇(PVA)分子稳定构型,并以HAN基ECSP的主要成分按一定比例构建凝胶模型。基于RESP(Restrained Electrostatic Potential)电荷生成更准确的凝胶模型拓扑文件,并进行凝胶模型的分子动力学模拟、模型稳定分析以及模型参数计算。结果 凝胶模型总能量相对平均值的周期性波动不超过7%。由于三维PVA链的包裹,H2O分子的扩散系数被大幅削弱。氢键分析和径向分布函数表明氢键键长主要分布在0.282 6 nm附近,PVA与H2O间的氢键较少,H2O与HAN、H2O与H2O之间的氢键较多。模型密度为1.405 g/cm³,与实验值吻合度高。在283、293、303 K下,HAN基ECSP凝胶模型的拉伸模量依次降低,剪切模量先增后减。在15 K/600 ps冷却速率下,HAN基ECSP凝胶模型的拉伸模量和剪切模量均增大。结论 ECSP制备结束后,冷却过程中的环境温度不宜过高,否则容易造成ECSP力学性能的快速下降,快速冷却可以提高ECSP的力学性能。     

某海域极端环境下15万吨级FPSO波浪荷载数值研究

目的 评估在役15万吨级FPSO在某海域百年一遇极端波浪作用下典型横剖面的水动力特性,进而得到FPSO的极值荷载,作为FPSO返坞改造的关键控制参数。方法 基于国产自主三维频域线性势流软件COMPASS-WALCS,建立15万吨级FPSO湿表面网格模型,根据三维绕射-辐射理论,计算湿表面上的水动力荷载,将每个绕射单元上的水动压力直接映射到结构模型上进行计算。采用谱分析方法对百年一遇海况进行分析,得到短期运动极值响应。对响应幅值算子(RAO)和波能谱密度进行谱分析,得到极端波浪下的响应谱,进而得到浮体运动和波浪荷载短期预报各种统计值,利用统计方法求得短期响应的最大值。结果 计算了船中部Fr143横剖面的载荷极值,即垂向弯矩、垂向剪力、剖面型心加速度等,发现船舶迎浪时弯矩值最大,随着浪向角增大,弯矩值逐渐减小,剖面垂向剪力则随着浪向角增大逐渐增大。结论 FPSO在极端波浪作用下,其大迎浪角条件下荷载更加危险,需要给予格外关注。     

基于Arrhenius模型和Peck模型的分段非线性加速模型

目的 解决Arrhenius模型无法估计湿度应力敏感产品和Peck模型试验时间较长的问题。方法 考虑温度应力和湿度应力对产品贮存寿命的综合影响,在产品激活能不变的假设下,将Arrhenius模型对产品激活能的估计和Peck模型对湿度应力参数的估计相结合,建立Arrhenius&Peck分段非线性加速寿命估计模型。基于此模型,在双应力恒加试验条件下,得到产品的寿命估计方程。结果 以弹上电子产品的恒定应力加速贮存试验为例,进行仿真分析,得到产品寿命的估计,并对比产品实际寿命。Arrhenius&Peck模型的寿命误差和失效率误差均控制在5%以内,准确度高于Arrhenius模型和Peck模型。结论 构建的Arrhenius&Peck分段非线性加速寿命模型可以充分利用温度和湿度条件下的试验数据,对温湿敏感产品的寿命估计有较好的应用效果,为导弹产品的寿命估计提供一种可选方法。     

舰船环境适应性设计方法探索与实践

探索舰船环境适应性的设计方法,以提高舰船在各种复杂环境下的适应能力。分析了舰船环境适应性设计中面临的若干问题和改进提高方向,参考借鉴国内外航空航天、电子等行业成功经验,提出了指导舰船环境适应性设计的主要设计原则和工作内容。围绕改善环境条件、加强耐环境能力设计这2个方面,提出了3种环境适应性设计方法,包括基于规范的设计方法、基于环境仿真的设计方法、基于预使用验证的设计方法。根据舰船风浪环境适应性设计的特点和要求,选择采用环境仿真和模型试验技术开展了应用研究。基于分析结果,提出了增加水线面系数、调整浮心、优化线型等多项改进措施建议。采用环境仿真和模型试验相结合的方式,可有效支撑舰船风浪环境适应性设计和评估,这一方法具有较高的工程推广应用价值。另外,未来应加大环境仿真技术的研究和应用力度,尝试开展多因素综合环境仿真,以进一步提高舰船的环境适应性。     

遗传和模拟退火算法在水质模型参数确定中的应用简介

水质模型参数的确定是构建水质模型的基础。相对于传统优化方法,现代优化算法的优势日趋明显。本文在基于现代优化算法的水质模型参数确定研究背景下,介绍了具有代表性的遗传算法和模拟退火算法,并对该两种算法的应用现状进行综述,旨在推进该领域的进一步探索。     

千层塔扦插繁殖研究

通过扦插试验,采用不同浓度水平的吲哚丁酸、萘乙酸、生根粉和吲哚丁酸＋萘乙酸等药剂处理千层塔插条,研究对插条的生根量、生根率、成活率等的影响和插条萌芽状况及扦插基质对插条生根的影响,为千层塔资源快速再生提供有效的繁殖途径。