Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Trophic transfer of polybrominated diphenyl ethers and polychlorinated biphenyls in a tidal freshwater marsh

The John Heinz National Wildlife Refuge (NWR) at Tinicum Marsh contains one of the last remaining tidal freshwater marsh communities along the Pennsylvania side of the Delaware River Estuary. The marsh receives a significant load of nutrients and sediment-associated contaminants and is hypothesised to act as an effective trap for these chemicals. The goal of this study was to quantify the levels of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) at various trophic levels at two sites within Tinicum Marsh and assess the factors important in determining their bioaccumulation and trophic transfer. For both PCBs and PBDEs, lipid variation for all species was a large factor in determining contaminant body burden. Also, concentrations in biota increased with increasing trophic level as determined by nitrogen isotope analysis (δ¹⁵N values) at the downstream site within Tinicum Marsh. This trend was less apparent at the upstream site and may be due to differences in feeding behaviours among species between the two sites and/or differences in carbon and nitrogen sources and recycling. These data are valuable in assisting bioaccumulation/trophic transfer studies and serve as benchmarks to which future PCB and PBDE concentrations will be compared.     

Elemental concentrations and in vitro bioaccessibility in Canadian background soils

Elemental concentrations and bioaccessibility were determined in background soils collected in Canada as part of the North American Geochemical Landscapes Project. The concentrations of As, Cr, Cu, Co, Ni and Zn were higher in the C-horizon (parent material) compared to 0–5 cm (surface soil), and this observation along with the regional distribution suggested that most of the variability in concentrations of these elements were governed by the bedrock characteristics. Unlike the above-stated elements, Pb and Cd concentrations were higher in the surface layer reflecting the potential effects of anthropogenic deposition. Elemental bioaccessibility was variable decreasing in the order Cd > Pb > Cu > Zn > Ni > Co > As > Cr for the surface soils. With the exception of As, bioaccessibility was generally higher in the C-horizon soils compared to the 0–5 cm soils. The differences in metal bioaccessibility between the 0–5 cm and the C-horizon and among the provinces may reflect geological processes and speciation. The mean, median or 95th percentile bioaccessibility for As, Cr, Cu, Co, Ni and Pb were all below 100 %, suggesting that the use of site-specific bioaccessibility results for these elements will yield more accurate estimation of the risk associated with oral bioavailability for sites where soil ingestion is the major contributor of human health risk.     

Size–frequency dynamics of NE Pacific abyssal ophiuroids (Echinodermata: Ophiuroidea)

The 17-year time-series study at Station M in the NE Pacific has provided one of the longest datasets on deep-sea ophiuroids to date. Station M is an abyssal site characterized by low topographical relief and seasonal and interannual variation in surface-derived food inputs. From 1989 to 2005, over 31,000 ophiuroid specimens were collected. Size–frequency distributions of the four dominant species, Ophiura bathybia, Amphilepis patens, Amphiura carchara and Ophiacantha cosmica, were examined for recruitment and the role of surface-derived food supplies on body size distributions. Juveniles were collected in sediment traps and used to investigate settlement patterns and seasonality. Trawl samples showed no indication of seasonal changes in recruitment to larger size classes; however, there was evidence of seasonal settling of juveniles. Interannual differences in median disk diameters and size distributions of trawl-collected adults are greater than those at the seasonal scale. Three of the four species, O. bathybia, A. patens and O. cosmica, had co-varying monthly median disk diameters, suggesting they may have a similar factor(s) controlling their growth and abundance. Interannual differences in monthly size distributions were generally greater than those between seasons. Cross-correlations between the particulate organic carbon (POC) flux (food supply) and size distribution indices for O. bathybia, A. patens and O. cosmica all were significant indicating that increases in food supply were followed by increases in the proportion of smaller size classes after approximately 17–22 months. These findings suggest that food inputs are indeed an important factor influencing deep-sea ophiuroid populations on interannual time scales, more generally supporting the long-hypothesized connection between food availability and population size structure in the deep sea. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

A Mathematical Model for the Effects of Fertilization on Nitrogen Concentrations in Unsaturated Soil on Blueberry Farms in Southern New Jersey

Nitrogen is commonly known as a food source for crops. However, the nitrogen compounds used in crop fertilizers, most commonly nitrate (NO₃) and ammonium (NH₄), are not widely understood. Blueberry plants do not take up these compounds as efficiently as organic nitrogen so varying amounts of leaching into the soil and groundwater will occur. A biogeochemical model consisting of ordinary and partial differential equations is implemented to computationally predict the concentrations of nitrate and ammonium in unsaturated soil of blueberry plants, specifically in the southern region of New Jersey. The model takes into account the type of soil of the region, the nitrate uptake of the plant, the water content in the roots region, the pressure heads in the soil pores, and the application rates of fertilizers containing nitrate, ammonium, and organic nitrogen. Computational simulations demonstrate that the model accounts for natural processes and, in addition, show that commonly used fertilizer application rates cause unnecessarily high concentrations of both nitrate and ammonium in the unsaturated soil level. Further, simulations show that decreasing nitrate fertilizer applications by 85.7% in annual and 91.8% in bi-annual schedules provides an optimal system for safe reapplication.     

Trends and applications of multi-criteria decision analysis in environmental sciences: literature review

Approximately 3000 papers concerning multi-criteria decision analysis (MCDA) in the environmental field were identified through a series of queries in the Web of Science database and classified by MCDA method and environmental application using text mining in R. Stemming and stop word removal techniques were used to remove irrelevant text from the literature. Trends in MCDA methods (AHP/ANP, TOPSIS, outranking, MAUT/MAVT) associated with specific environmental applications (water, air, energy, natural resources, and waste management) or interventions/tools applications (stakeholders, strategies, sustainability, and GIS) were identified. The results show a linear growth in the share of MCDA papers in environmental science across all application areas. Furthermore, the results show that AHP/ANP and MAUT/MAVT are the most frequently mentioned MCDA methods in the literature. For environmental applications, the results showed that natural resource and waste management keywords were, respectively, the most and least commonly discussed applications within the MCDA papers. For intervention/tool applications, we found that keywords associated with ‘strategy’ and ‘GIS’ applications are, respectively, the most and least commonly discussed keywords within the MCDA papers. The authors found that MCDA method keywords were evenly distributed across the environmental and intervention/tool applications, indicating a lack of preference in the environmental field for use of specific MCDA methods. This paper demonstrates that text mining is an applicable tool to assess specific textual trends and patterns when analyzing larger bodies of MCDA literature.