Analysis of BTEX and other substituted benzenes in water using headspace SPME-GC-FID: method validation

The analysis of BTEX and other substituted benzenes in water samples using solid phase microextraction (SPME) and quantification by gas chromatography with flame ionization detection (GC-FID) was validated. The best analytical conditions were obtained using PDMS/DVB/CAR fibre using headspace extraction (HS-SPME) at 50 [degree]C for 20 min without stirring. The linear range for each compound by HS-SPME with GC/FID was defined. The detection limits for these compounds obtained with PDMS/DVB/CAR fibre and GC/FID were: benzene (15 ng L(-1)), toluene (160 ng L(-1)), monochlorobenzene (54 ng L(-1)), ethylbenzene (32 ng L(-1)), m-xylene (56 ng L(-1)), p-xylene (69 ng L(-1)), styrene (35 ng L(-1)), o-xylene (42 ng L(-1)), m-dichlorobenzene (180 ng L(-1)), p-dichlorobenzene (230 ng L(-1)), o-dichlorobenzene (250 ng L(-1)) and trichlorobenzene (260 ng L(-1)). This headspace SPME-GC-FID method was compared with a previously validated method of analysis using closed-loop-stripping analysis (CLSA). The headspace SPME-GC-FID method is suitable for monitoring the production and distribution of potable water and was used, in field trials, for the analysis of samples from main intakes of water (surface or underground) and from the water supply system of a large area (Lisbon and neighbouring municipalities).     

Hybridization between wheat (Triticum aestivum) and the wild species Aegilops geniculata and A. biuncialis under experimental field conditions

Hybridization between Aegilops geniculata, A. biuncialis and bread wheat Triticum aestivum has been evaluated during two seasons under simulated field conditions to estimate the field hybridization rate under Central Spain conditions. The mean frequencies of hybridization between A. biuncialis and A. geniculata with wheat were 0.34% and 0.31%, respectively. Data from 10 hybrid plants for each combination showed that hybrids can be partially fertile by backcrossing with wheat parent, with percent averages of 3.17 grains/spikelets for A. biuncialis × wheat hybrids and 2.87 grains/spikelets for A. geniculata × wheat hybrids. Self-pollination, although at very low rates, was also possible in hybrids. The potential risks associated with natural hybridization in the context of transgenic wheat cultivation are discussed.     

Transabdominal chorionic villus sampling: Analysis of 350 consecutive cases

We report a series of 350 patients submitted to transabdominal chorionic villus sampling (CVS). A technique using two ultrasound-guided needles and a suction pump was used. In most cases, the procedure was performed between 9 and 13 weeks. Twenty-one pregnancies were selectively terminated; nine spontaneous abortions followed the procedure and one fetal loss after 28 weeks was recorded; 153 pregnancies are in progress and 169 delivered fetuses are alive and well. Transabdominal biopsy is a feasible and effective technique for CVS.     

Quantitative Assessment of the Intertidal Environment of Kuwait I: Integrated Environmental Classification

Quantitative analysis of physical, chemical and biological data of the intertidal zone in Kuwait was undertaken to develop an integrated basis for assessing and protecting this sensitive coastal ecosystem. Cluster analyses were performed to determine the resemblance between the sampling stations based on the sediment composition, the benthic macrofauna and the physico-chemical characteristics of the intertidal sediment/water. Five distinct sub-environments were delineated within the intertidal zone of Kuwait. Each sub-environment was described in terms of number of taxa, mean density of organisms, sediment type, tidal level and dominant organisms. The physico-chemical parameters investigated were found to be unimportant in the distribution of the intertidal benthic macrofauna. On the other hand, sediment type was found to be a major factor in the overall composition of the benthic community. The benthic fauna and related characteristics of the sub-environments could be used as indicators to monitor changes in the intertidal ecosystem and as guides to protection and management of the different coasts. The approach described in this paper could also be adopted elsewhere to provide a sound basis for evaluating environmental impacts and for developing sustainable coastal management.     

Mycorrhizae increase arsenic uptake by the hyperaccumulator Chinese brake fern (Pteris vittata L.)

Chinese brake fern (Pteris vittata L.) is a hyperaccumulator of arsenic (As) that grows naturally on soils in the southern United States. It is reasonable to expect that mycorrhizal symbiosis may be involved in As uptake by this fern. This is because arbuscular mycorrhizal (AM) fungi have a well-documented role in increasing plant phosphorus (P) uptake, P and As have similar chemical properties, and ferns are known to be colonized by AM fungi. We conducted a factorial greenhouse experiment with three levels of As (0, 50, and 100 mg kg(-1)) and P (0, 25, and 50 mg kg(-1)) and with and without Chinese brake fern colonized by a community of AM fungi from an As-contaminated site. We found that the AM fungi not only tolerated As amendment, but their presence increased frond dry mass at the highest As application rate. Furthermore, the AM fungi increased As uptake across a range of P levels, while P uptake was generally increased only when there was no As amendment. These data indicate that AM fungi have an important role in arsenic accumulation by Chinese brake fern. Therefore, to effectively phytoremediate As-contaminated soils, the mycorrhizal status of ferns needs to be taken into account.     

Selective collection as a pretreatment for indirect solid recovered fuel generation

Effective selective collection (SC) has been increasing in many countries of the European Union. As a consequence the composition of residual municipal solid waste (RMSW) is changing not only because of economic development, but also due to the collection system. The input of RMSW treatment plants is thus not homogeneous. This paper analyses two case studies involving a total of five SC scenarios and their impact on the generation of solid recovered fuel (SRF) with/without bio-drying, post-treatment and packaging take back programs (TBPs). These case studies are based on two types of SC: kerbside and drop-off. The latest regulation on SRF classification is taken into account: energy content, Cl and Hg concentrations are assessed and discussed. The role of the respirometric index (RI) is also analyzed. Results show that when SC is highly efficient RMSW can be classified directly as SRF, but only if the introduction of RI does not set stringent respirometric targets. The role of packaging TBPs is important as the residual waste remaining after the packaging has been processed, can be valorized increasing the lower heating value (LHV) of the residual RMSW and minimizing the streams that should be landfilled. The source separation of food waste has a significant impact on the suitability of bio-drying: when the SC of food waste is very efficient, its percentage in the RMSW may be too low for effective bio-drying.     

Dimethoate induces genotoxicity as a result of oxidative stress: in vivo and in vitro studies

Environmental Science and Pollution Research - Dimethoate ([O,O-dimethyl S-(N-methylcarbamoylmethyl) phosphorodithioate]) is an organophosphate insecticide and acaricide widely used for...     

Ecotoxicity interspecies study of ionic liquids based on phosphonium and ammonium cations

Environmental Science and Pollution Research - This work studies the effects of different bromide-based ionic liquids, with phosphonium and ammonium cations, towards several environmental...     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

Sediment distribution on the continental shelf in relation to stream inputs and contamination: hydrodynamic,chemical, mineralogical,and sedimentological characteristics (Ligurian Sea,Italy)

River estuaries, continental shelf, and sediment contamination are closely linked from the point of view of sediment transport and diffusion that is governed by different factors such as sea waves and currents, river flows and floods, and sediment characteristics. Taking these factors into consideration, we have examined marine environmental and marine bottom sediments off the mouth of a stream to highlight the main ways of sediment and contaminant transport and diffusion on the continental shelf. For this purpose, we followed a multidisciplinary approach, studying circulation of water masses, hydrological characteristics of water column, distribution and main characteristics of sediment grain size, sediment mineralogical composition, and metal concentrations of bottom sediments. Our results allowed identifying the presence of preferential ways of sediment deposition and areas of sediment spread for the Entella Stream, as well as the origin of some metals.