Level of contamination and impact of pesticides in cupped oyster, Crassostrea gigas, reared in a shellfish production area in Normandy (France)

Over the last decade, oysters in the Bay of Veys (Northwest France) have sporadically experienced significant summer mortality events which appear to be due to a combination of extrinsic and intrinsic factors. In the present work, the involvement of pesticides (as additional stressors) was investigated using both artificial exposure and field studies (at two sites). Six herbicides were detected in seawater following tests for a total of 15 herbicides. The most estuarine site was the most contaminated, showing relatively high values compared with those recorded in a neighboring river. No pesticides were detected in the flesh of oysters in the field but exposure experiments led to an accumulation of two substituted ureas (diuron and isoproturon, from 0.5 micro g/L and 1 micro gL(- 1) respectively). Some physiological effects were observed in terms of reproduction (partial spawning) and histopathology (atrophy of the digestive tubule epithelium) but results related to other tissue alterations and to neutral red retention (NRR) assays were not conclusive and require further investigation.     

FMEA and consideration of real work situations for safer design of production systems

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.     

Identification and quantification of 19 pharmaceutical active compounds and metabolites in hospital wastewater in Cameroon using LC/QQQ and LC/Q-TOF

Human pharmaceutical residues are a serious environmental concern. They have been reported to have eco, geno, and human toxic effects, and thus their importance as micropollutants cannot be ignored. These have been studied extensively in Europe and North America. However, African countries are still lagging behind in research on these micropollutants. In this study, the wastewaters of the University Teaching Hospital of Yaoundé (UTHY) were screened for the presence of active pharmaceutical ingredients and their metabolites. The screening was carried out using two methods: high-performance liquid chromatography coupled to a triple quadrupole analyzer (LC/QQQ) and high-performance coupled to a mass spectrometer with a time of flight analyzer (LC/Q-TOF). A total of 19 active pharmaceutical ingredients and metabolites were identified and quantified. The compounds identified include paracetamol (211.93 μg/L), ibuprofen (141 μg/L), tramadol (76 μg/L), O-demethyltramadol (141 μg/L), erythromycinanhydrate (7 μg/L), ciprofloxacin (24 μg/L), clarinthromycine (0.088 μg/L), azitromycine (0.39 μg/L), sulfamethoxazole 0.16 μg/L), trimetoprime (0.27 μg/L), caffeine (5.8 μg/L), carnamaeepine (0.94 μg/L), atenolol (0.43 μg/L), propranolol (0.3 μg/L), cimetidine (34 μg/L), hydroxy omeprazole (5 μg/L), diphenhydramine (0.38 μg/L), metformine (154 μg/L), and sucralose (13.07 μg/L).     

Assessment of multi-contaminant exposure in a cancer treatment center: a 2-year monitoring of molds,mycotoxins, endotoxins,and glucans in bioaerosols

Indoor air quality in health care facilities is a major public health concern, particularly for immunocompromised patients who may be exposed to microbiological contaminants such as molds, mycotoxins, endotoxins, and (1,3)-ß-D-glucans. Over 2 years, bioaerosols were collected on a monthly basis in a cancer treatment center (Centre F. Baclesse, Normandy, France), characterized from areas where there was no any particular air treatment. Results showed the complexity of mycoflora in bioaerosols with more than 100 fungal species identified. A list of major strains in hospital environments could be put forward due to the frequency, the concentration level, and/or the capacity to produce mycotoxins in vitro: Aspergillus fumigatus, Aspergillus melleus, Aspergillus niger, Aspergillus versicolor, Cladosporium herbarum, Purpureocillium lilacinum, and Penicillium brevicompactum. The mean levels of viable airborne fungal particles were less than 30.530 CFU per m³ of air and were correlated to the total number of 0.30 to 20 μm particles. Seasonal variations were observed with fungal particle peaks during the summer and autumn. Statistical analysis showed that airborne fungal particle levels depended on the relative humidity level which could be a useful indicator of fungal contamination. Finally, the exposure to airborne mycotoxins was very low (only 3 positive samples), and no mutagenic activity was found in bioaerosols. Nevertheless, some fungal strains such as Aspergillus versicolor or Penicillium brevicompactum showed toxigenic potential in vitro.     

Is the freshwater gammarid, Dikerogammarus villosus, a suitable sentinel species for the implementation of histochemical biomarkers?

In order to enlarge the range of potential sentinel species for the implementation of a multiple biomarker approach, spatial and monthly morphological variations of four cellular compartments and contents were assessed during two years in the hepatopancreatic caeca of the freshwater gammarid, Dikerogammarus villosus (Crustacea, Amphipoda), using histochemistry coupled to image analysis. Among the three study sites, the second one, located in a reservoir receiving the overheated and copper-contaminated waters of a nuclear power plant, was the most anthropised. During this passive biomonitoring survey, unsaturated neutral lipids were more abundant, the surface densities of the lysosomal and peroxisomal systems were, respectively less and more important, and lipofuscin granules tended to accumulate in the amphipods from the second site compared to both others. Nonetheless, in this context, the present cellular biomarker suite, analysed through an integrative approach, was not powerful enough to highlight spatial heterogeneity significantly. This may partly result from particularities in the patterns of metal accumulation and copper physiological requirements of amphipods (haemocyanin synthesis). Nevertheless, we think that the use of this Ponto-Caspian non-indigenous species in biomonitoring surveys deserves further investigation, owing to its current position in freshwater and brackish European ecosystems, considering both biomass and functioning. Cellular responses could be studied in parallel with endpoints at other levels of the biological organization to compose a more powerful biomarker suite. Furthermore, comparing biological responses to environmental stress in this invasive species and less competitive autochthonous gammarids could be of great interest.     

Organochlorine pesticide in fresh and pasteurized cow's milk from Kampala markets

Fresh and pasteurized milk samples from Kampala markets were analyzed for organochlorine pesticides using a gas chromatograph equipped with an electron capture detector. Five organochlorine pesticides, namely; aldrin, dieldrin, endosulfan, lindane, DDT and its metabolites were detected in the milk samples and confirmed with a gas chromatograph equipped with a mass spectrometer [GC-MS]. The mean values are expressed in mg kg⁻¹ milk fat (mf) basis. The mean concentration in the fresh milk (n = 54) were: 0.026 ± 0.003 mg kg⁻¹ mf; 0.002 ± 0.0003 mg kg⁻¹, below the detection limit; 0.007 ± 0.003 mg kg⁻¹, 0.009 ± 0.002 mg kg⁻¹ milk fat for lindane, endosulfan dieldrin and aldrin, respectively. The mean concentrations of p,p′-DDE; p,p′-DDT and o,p′-DDT were 0.009 ± 0.002 mg kg⁻¹; 0.033 ± 0.007 mg kg⁻¹ and 0.008 ± 0.001 mg kg⁻¹ mf, respectively in the fresh milk samples.In the pasteurized milk samples (n = 47), the mean concentrations recorded were: 0.008 ± 0.003 mg kg⁻¹, 0.025 ± 0.004 mg kg⁻¹, and 0.007 ± 0.001 mg kg⁻¹, respectively for p,p′-DDE; p,p′-DDT and o,p′-DDT.Alpha and beta-endosulfan recorded the concentration below the detection limit and the mean of 0.022 ± 0.001 mg kg⁻¹ mf, 0.005 ± 0.002 mg kg⁻¹ mf, and 0.006 ± 0.0002 mg kg⁻¹ mf, respectively for lindane, dieldrin and aldrin. Although, most of the residues detected were above the residue limits set by the FAO/WHO (2008), bioaccumulation of these residues is likely to pose health risks to the consumers of milk in Uganda.