Removal of Linear and Branched p-Alkylphenols from Aqueous Solution by Combined Use of melB Tyrosinase and Chitosan Beads

In this study, melB tyrosinase was applied for enzymatic removal of linear and branched p-alkylphenols from aqueous solutions. First, systematic studies were carried out to estimate the effects of the process parameters such as the temperature, pH value, and enzyme dose on quinone conversion of p-cresol as a model phenol compound. A variety of p-alkylphenols were removed from aqueous solutions through the tyrosinase-catalyzed quinone conversion and subsequent nonenzymatic adsorption of quinone derivatives on chitosan beads at pH 6.0 and 30 °C under the optimum conditions determined for p-cresol. The % removal values of 98–100 were obtained for p-n-alkylphenols. Branched p-alkylphenols with a weak estrogenic activity containing 4-tert-butylphenol and 4-tert-pentylphenol, which underwent no quinone conversion by commercially available mushroom tyrosinase in the absence of H₂O₂, were also effectively removed by further increasing either the melB tyrosinase concentration or the amount of added chitosan beads. The present technique is much effective in the fact that a series of reactions rapidly progress under mild conditions and the chitosan beads can be readily separated from the reaction medium after the enzymatic treatment.     

Adsorption and desorption characteristics of several herbicides on sediment

The objective of this study was to clarify the adsorption and desorption characteristics of several herbicides in sediment. Five herbicides, esprocarb, thiobencarb, dimethametryn, pretilachlor, and simetryn were examined in this study. The adsorption ratio on the sediment increased in the following order: pretilachlor < dimethametryn < simetryn < thiobencarb < esprocarb. On the other hand, the adsorption ratio on the sediment without organic matter increased in the following order: thiobencarb < esprocarb < pretilachlor < dimethametryn < simetryn. Furthermore, the amounts of simetryn, dimethametryn, and pretilachlor adsorbed on the sediment without organic matter increased, while those of esprocarb and thiobencarb decreased in comparison to the original sediment. These results strongly suggested that the mineral surface in the sediment was very important as the adsorption site for the herbicide, especially in the case of simetryn, dimethametryn, and pretilachlor. All the adsorption and desorption data fitted well with the Freundlich equation. The hysteresis in the adsorption-desorption phenomena in the sediment was observed for all the herbicides, and it was affected by the organic matter in sediment, especially in the case of dimethametryn and pretilachlor.     

Postcopulatory mate guarding by vocalization in the Formosan squirrel

The Formosan squirrel, Callosciurus erythraeus thaiwanensis, emitted different vocalizations in response to terrestrial and aerial predators and snakes. Each vocalization caused nearby individuals to adopt a different type of anti-predator behaviour. In mating bouts, males produced two types of loud calls: precopulatory calls, emitted before copulations, and postcopulatory calls, emitted after copulations. The latter continued for 17 min on average. The estrous female and other males attending the mating bouts stopped moving during the postcopulatory call, so that the calling male was able to tend the female without interruption. The sound characteristics of anti-terrestrial-predator and postcopulatory calls recorded in the captivity were compared, and none of the ten characters of duration and frequency measured differed between the two calls. Playback experiments also showed that responses to the sounds in two different contexts, escape behaviour and defensive immobility, did not differ. The similarity between anti-predator and postcopulatory calls is discussed with reference to the possibility of manipulation and other explanatory hypotheses.     

Environmental-economic models for total emission control of regional environmental pollution — input-output approach

This paper deals with a Leontief-type dynamic input-output analysis for total emission control of pollution. A dynamic input-output model can be described as a linear programming problem. In this paper an objective function to be minimized is chosen as the sum of pollutants emitted in a regional area throughout the planning period. It is assumed that consumption grows with a constant growth rate throughout the planning period. With this model, we can tell how to assign the elimination rate of pollutants to each production sector, under the constraint that the total emission standard is satisfied in each term of the planning period.     

Indigo carmine removal by charcoal from rice bran as an agricultural by-product

On the utilization of agricultural by-product, charcoal from rice bran was produced. The adsorption characteristics of indigo carmine onto charcoals from rice bran were investigated by the batch method. The yield and surface area of charcoal were decreased and increased with increase of carbonization temperature, respectively. The removal ratio of indigo carmine was high with the charcoal carbonized at higher temperature. In the relationship between the amount of indigo carmine adsorbed and the square root of elapsed time, a good linearity was recognized. The kinetic constant of adsorption removal for indigo carmine was rapid in the charcoal carbonized at higher temperature. The adsorption characteristics for indigo carmine removal by charcoal from rice bran were dominated by the value of their surface area.     

Analysis of photochemical pollution in summer and winter using a photochemical box model in the center of Tokyo, Japan.

In order to give an effective and rapid analysis of the photochemical pollution and information for emission control strategies, a photochemical box model (PBM) was applied to one moderate summer episode, 11 July 1996, and one typical winter episode, 3 December 1996, in the center of Tokyo, Japan. The box model gave a good prediction of the photochemical pollution with minimal investment. As expected, the peak ozone in summer is higher than in winter. The NOx concentrations in winter are higher than those in summer. In summer, NO and NO2 have one peak in the morning. In winter, NO and NO2 show two peaks during the day. Three model runs including no reactions, a zero ozone boundary condition and dark reactions were conducted to understand the photochemical processes. The effects of emission reduction on the formation of the photochemical pollution in the center of Tokyo have been studied. The results show that the reduction of NMHC emission can decrease the ozone, however, the reduction of NOx emission can increase the ozone. It can be concluded that if the NOx emission are reduced, the reduction of NMHC should be more emphasized in order to decrease the ozone concentration in the center of Tokyo, Japan, especially the reduction of the NMHC from stationary source emission.     

A comparative study on the autoxidation of dimethyl ether (DME) comparison with diethyl ether (DEE) and diisopropyl ether (DIPE)

The Japanese government is planning to introduce DME as a substituted energy for oil and LNG. Introduction of DME could contribute greatly to both the prevention of global warming and the formation of resource-recycling societies. In these circumstances, a safety assessment of DME is very important when DME is used on a large scale. There is a possibility that prolonged exposure in air induces autoxidation to produce explosive organic peroxides during transportation and storage of DME. Therefore, the reactivity of DME with oxygen and the mechanism of the autoxidation were investigated. Accelerating Rate Calorimetry (ARC) was used to evaluate the thermal stability of DME and DIPE, a known peroxide producers, under adiabatic and various atmospheric conditions. In ARC studies of DME under oxygen, exothermic decompositions were detected although its self-heating rate was low in comparison with DIPE. Oven storage tests were carried out and iodimetry was used to measure the concentration of peroxides produced from DME in comparison with DIPE and DEE. However, no products could be found for DME either by GC/MS or by iodimetry, while some evidence of autoxidation of both DEE and DIPE were obtained from these experiments.     

Carbon Molecular Sieving Membranes Derived from Lignin-Based Materials

Carbon molecular sieving membranes were prepared by pyrolysis of lignocresol derived from lignin by the phase-separation method. Lignocresol membranes formed by a dip process on a porous -alumina tubing were carbonized at 400–800°C under nitrogen atmosphere. The thickness of the membrane formed on the outer surface of the substrate was about 400 nm judging from SEM observation. Gas-evolving behavior of lignocresol was measured using thermogravimetry-mass spectrometry (TG-MS). The gaseous products evolved from lignocresol included a number of fragments with higher molecular weights; whereas those from phenolic resin are mainly due to phenol and methylphenol. These evolved pyrolysis fragments effectively contribute to micropore formation of carbonized lignocresol membranes. Gas permeation rates through the membrane decreased in the order of increasing kinetic molecular diameter of the penetrant gas, and the membrane behaved like a molecular sieve. The permeation properties were dependent on heating conditions, and a pyrolysis temperature of 600°C gave the best membrane performance. Gas selectivities of the membrane prepared at 600°C were 50, 8, 290, and 87 for CO₂/N₂, O₂/N₂, H₂/CH₄, and CO₂/CH₄ at 35°C, respectively.     

密闭压力容器小型循环试验结果

在联合国危险品运输试验和标准建议书(桔皮书)中,系列E涉及评价物质在密闭容器中对剧烈加热的热爆炸敏感性的标准。但是人们一直希望并致力于发展一种定量,可靠,重复性好的方法来评价物质的热爆炸敏感性。本文介绍了一种小型密闭压力容器循环试验的研究及其作为一种筛选试验向联合国提案的最新进展。实验结果表明,几种物质在不同实验室的重复性非常好,其(dP／dt)max平均偏差率在20％以内,表明该小型密闭压力容器作为评价物质热反应危险性的测试方法具有较高的可靠性。