Chemical composition of individual aerosol particles from working areas in a nickel refinery

Individual aerosol particles (n = 1170) collected at work stations in a nickel refinery were analyzed by wavelength-dispersive electron-probe microanalysis. By placing arbitrary restrictions on the contents of sulfur and silicon, the particles could be divided into four main groups. Scanning electron images indicated that most of the particles examined were relatively small (< or = 2 microm, equivalent projected area diameter), and that their morphology suggested formation from a melt. There was an absence of well-defined phases and simple stoichiometries, indicating that exposures to pure substances such as nickel subsulfide or specific oxides appeared not to occur. Although the elemental composition of particles varied greatly, a rough association was evident with the known elemental content of the refinery intermediates. The implications of the findings for aerosol speciation measurements, toxicological studies and interpretation of adverse health effects are explored.     

Sexual signalling and viability in a wolf spider (Hygrolycosa rubrofasciata): measurements under laboratory and field conditions

This study examined the crucial prediction of the conditional-handicap theory, the relationship between male sexual trait size and male viability, in the wolf spider Hygrolycosa rubrofasciata. In this species, males court females by drumming dry leaves with their abdomen, and males with the highest drumming rate enjoy highest mating success. We determined male drumming rate, body mass, and mobility, which reflects mate-searching activity, in relation to male survival. Because it is often difficult to know how results obtained from laboratory studies reflect the natural world, particularly when the measured variable is survival, we repeated our study in both laboratory and field conditions. Males drumming at the highest rate survived better than males drumming at a lower rate in both laboratory and field conditions. These results are in accordance with the predictions of conditional-handicap models of sexual selection. Survival was independent of male body mass and there was no significant correlation between male drumming activity and body mass. However, large males moved further than smaller males, and males moving longer distances lost less mass than those moving shorter distances. These results suggest that, moving, and consequently mate-searching activity, may be a condition-dependent trait and that there may be a advantage for large males in mate searching. Received: 22 October 1998 / Received in revised form: 28 January 1999 / Accepted: 14 February 1999     

Mental and social health in disasters: the Sphere standards and post‐tsunami psychosocial interventions in Asia

The primary objective of this paper is to examine and inform the mental health and psychosocial support standards of the 2011 edition of the Sphere Project's Humanitarian Charter and Minimum Standards in Humanitarian Response. This is done through a qualitative analysis of internal evaluation documents, reflecting four long‐term humanitarian psychosocial programmes in different countries in post‐tsunami Asia. The analysis yielded three overall conclusions. First, the Sphere standards on mental health and psychosocial support generally are highly relevant to long‐term psychosocial interventions after disasters such as the Indian Ocean tsunami of 26 December 2004, and their application in such settings may improve the quality of the response. Second, some of the standards in the current Sphere handbook may lack sufficient guidance to ensure the quality of humanitarian response required. Third, the long‐term intervention approach poses specific challenges to programming, a problem that could be addressed by including additional guidance in the publication.     

Airborne exposure and biological monitoring of bar and restaurant workers before and after the introduction of a smoking ban

The aims were to assess the impact of a total smoking ban on the level of airborne contaminants and the urinary cotinine levels in the employees in bars and restaurants. In a follow up design, 13 bars and restaurants were visited before and after the implementation of a smoking ban. Ninety-three employees in the establishments were initially included into the study. The arithmetic mean concentration of nicotine and total dust declined from 28.3 microg m(-3) (range, 0.4-88.0) and 262 microg m(-3) (range, 52-662), respectively, to 0.6 microg m(-3) (range, not detected-3.7) and 77 microg m(-3) (range, not detected-261) after the smoking ban. The Pearson correlation coefficient between airborne nicotine and total dust was 0.86 (p < 0.001; n = 48). The post-shift geometric mean urinary cotinine concentration declined from 9.5 microg g(-1) creatinine (cr) (95% CI 6.5-13.7) to 1.4 microg g(-1) cr (95% CI 0.8-2.5) after the ban (p < 0.001) in 25 non-snuffing non-smokers. A reduction from 1444 microg g(-1) cr (95% CI 957-2180) to 688 microg g(-1) cr (95% CI 324-1458) was found (p < 0.05) in 29 non-snuffing smokers. The urinary cotinine levels increased from 11.7 microg g(-1) cr (95% CI 7.0-19.6) post-shift to 21.9 microg g(-1) cr (95% CI 13.3-36.3) (p < 0.01) in the next morning in 24 non-snuffing non-smokers before the smoking ban. A substantial reduction of airborne nicotine and total dust was observed after the introduction of a smoking ban in bars and restaurants. The urinary cotinine levels were reduced in non-smokers. The decline found in smokers may suggest a reduction in the amount of smoking after intervention. In non-smokers cotinine concentrations were higher based on urine sampled the morning after a shift than based on urine sampled immediately post-shift.     

The heterogeneous composition of working place aerosols in a nickel refinery: a transmission and scanning electron microscope study

Size, morphology and chemical composition of individual aerosol particles collected in a nickel refinery were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis (EDX). The phase composition was determined by selected area electron diffraction and EDX in a transmission electron microscope. Most particles are heterogeneous on a nanometer scale and consist of various phases. Nickel phases observed in the roasting and anode casting departments include metallic nickel, bunsenite (NiO), trevorite (Ni,Cu)Fe2O4, heazlewoodite Ni3S2, godlevskite (Ni,Cu)9S8, orthorhombic NiSO4 and an amorphous Ni,Cu.Al,Pb sulfate of variable composition. Additional phases encountered include corundum (Al2O3), murdochite (PbCu6O8), hexagonal Na2SO4, anhydrite (CaSO4), graphite (C) and amorphous carbon. The implications of the occurrence of the different Ni phases and their nanometer size for the study of adverse health effects are explored.     

Methiopropamine in blood samples from drivers suspected of being under the influence of drugs

Objectives: Methiopropamine (MPA; 1-(thiophen-2-yl)-2-methylaminopropane) belongs to the new psychoactive substances (NPS) that have emerged on the drug market in recent years. MPA appeared in 2011 and is an analogue of methamphetamine, sold as, for example, "Slush Eric"and "Blow." It is reported to have effects similar to those of methamphetamine, but the toxicity in humans is not known. Three fatal cases involving MPA have been reported. One analytical confirmed intoxication case has been published, and this supports the symptoms described by the users. The prevalence of recreational use of MPA is unknown, and no studies have reported the prevalence in driving under the influence of drug (DUID) cases.

Methods: We investigated the frequency of MPA in DUID cases received at our institute during a 12-week period and report the analytical method using an ultraperformance liquid chromatography.tandem mass spectrometry for quantification of MPA in whole blood. The analytical findings were compared to the results from a clinical test of impairment performed by a physician shortly after the driving episode. The samples were analyzed for 42 different psychoactive substances.

Results: MPA was detected in 10 DUID cases (0.8% of the cases), only from male drivers. Other drugs were detected concomitantly in all the cases. Two of the cases were traffic accidents.

Conclusions: Our study shows that MPA is found in DUID cases and reveals that NPS are used among drivers and also proven in blood from drivers involved in traffic accidents. More studies are requested regarding the pharmacological and toxicological effects of MPA and other NPS. This is the first article that describes a method for analyzing and quantifying MPA in whole blood samples.     

Chemical composition of individual aerosol particles in workplace air during production of manganese alloys

Aerosol particle samples were collected at ELKEM ASA ferromanganese (FeMn) and silicomanganese (SiMn) smelters at Porsgrunn, Norway, during different production steps: raw material mixing, welding of protective steel casings, tapping of FeMn and slag, crane operation moving the ladles with molten metal, operation of the Metal Oxygen Refinement (MOR) reactor and casting of SiMn. Aerosol fractions were assessed for the analysis of the bulk elemental composition as well as for individual particle analysis. The bulk elemental composition was determined by inductively coupled plasma atomic emission spectrometry. For individual particle analysis, an electron microprobe was used in combination with wavelength-dispersive techniques. Most particles show a complex composition and cannot be attributed to a single phase. Therefore, the particles were divided into six groups according to their chemical composition: Group I, particles containing mainly metallic Fe and/or Mn; Group II, slag particles containing mainly Fe and/or Mn oxides; Group III, slag particles consisting predominantly of oxidized flux components such as Si, Al, Mg, Ca, Na and K; Group IV, particles consisting mainly of carbon; Group V, mixtures of particles from Groups II, III and IV; Group VI, mixtures of particles from Groups II and III. In raw material mixing, particles originating from the Mn ores were mostly found. In the welding of steel casings, most particles were assigned to Group II, Mn and Fe oxides. During the tapping of slag and metal, mostly slag particles from Group III were found (oxides of the flux components). During movement of the ladles, most particles came from Group II. At the MOR reactor, most of the particles belonged to the slag phase consisting of the flux components (Group III). The particles collected during the casting of SiMn were mainly attributed to the slag phase (Groups III and V). Due to the compositional complexity of the particles, toxicological investigations on the kinetics of pure compounds may not be easily associated with the results of this study.     

Characterisation of occupational exposure to air contaminants in a nitrate fertiliser production plant

The aim of this study was to characterise personal exposures to dust, acid vapours, and gases among workers in a Norwegian nitrate fertiliser production plant, as part of an ongoing epidemiological study. In total, 178 inhalable and 179 thoracic aerosol mass fraction samples were collected from randomly chosen workers (N = 141) from three compound fertiliser departments (A, B and C), a calcium nitrate fertiliser production department, nitric acid- and ammonia-production departments, and a shipping department. The overall median inhalable and thoracic aerosol mass concentrations were generally low (1.1 mg m(-3) (min-max: <0.93-45) and 0.21 mg m(-3) (min-max: <0.085-11), respectively). Workers at the compound fertiliser departments B and C had significantly higher inhalable aerosol mass air concentrations compared to the other departments (p < 0.05), except for compound fertiliser department A; however, the difference between the compound fertiliser department C and calcium nitrate department was slightly above the significant level. Workers at the compound fertiliser department A had significantly higher thoracic aerosol mass air concentrations compared to the other departments (p < 0.05), except for compound fertiliser departments B and C. The results indicate that the extrathoracic aerosol fraction of the aerosol compared to the thoracic fraction dominated in most departments. Measurement of the main constituents Ca, K, Mg, and P in the water-soluble and water-insoluble aerosol mass fractions showed that the air concentrations of these elements were low. There is, however, a shift towards more water-soluble species as the production goes from raw material with phosphate rock towards the final product of fertilisers. Overall, the arithmetic mean of water-soluble Ca in the thoracic mass fraction was 51% (min-max: 1-100). A total of 169 personal samples were analysed for HNO(3) vapour and HF. The highest median concentration of HNO(3) (0.63 mg m(-3)) was in the compound fertiliser departments B, and all measurements but four of the HF concentrations were below the LOD of 190 μg m(-3). Exposures to NH(3), CO and NO(2) were measured using direct-reading electrochemical sensors and the time weighted overall averages were all below the LODs of the respective sensors, NH(3) 2 ppm; CO 2 ppm; and NO(2) 0.2 ppm, but some short-term peaks were detected. Even though our results indicate that the workers may experience peak exposure episodes when performing job tasks such as cleaning or maintenance work, the overall air concentrations are well below what is considered to cause known health risks.     

Classification of particles from the farm environment by automated sizing, counting and chemical characterisation with scanning electron microscopy-energy dispersive spectroscopy

About 60,000 particles in 288 aerosol samples collected during farm work have been characterised with automated particle analysis using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Based on EDS-analysis of materials with known composition (potato flour, alpha-quartz, K-feldspar and beta-wollastonite), criteria were developed for classification of particles as: (1) organic, (2) silicon-rich (silica), and (3) other inorganic particles. The reproducibility of the relative mass proportions in dust samples collected during farm work was 0.078 when approximately 200 particles were characterised per sample. Field samples from the farm environment showed clear differences in composition. Generally, inorganic particles dominated the particle mass. The proportion of the organic particle mass was highest for tending of swine and poultry, 55 and 38% respectively. Silica particles amounted to 10 to 20% of the total mass during handling crops, e.g. grain, straw, hay, potatoes, and onions. It seems likely that the results can be used in etiologic studies, but further validation would be needed for quantitative purposes.     

Characterization of individual aerosol particles in workroom air of aluminium smelter potrooms

Aerosol particles with aerodynamic diameters between 0.18 and 10 microm were collected in the workroom air of two aluminium smelter potrooms with different production processes (Soderberg and Prebake processes). Size, morphology and chemical composition of more than 2000 individual particles were determined by high resolution scanning electron microscopy and energy-dispersive X-ray microanalysis. Based on chemical composition and morphology, particles were classified into different groups. Particle groups with a relative abundance above 1%(by number) include aluminium oxides, cryolite, aluminium oxides-cryolite mixtures, soot, silicates and sea salt. In both production halls, mixtures of aluminium oxides and cryolite are the dominant particle group. Many particles have fluoride-containing surface coatings or show agglomerations of nanometer-sized fluoride-containing particles on their surface. The phase composition of approximately 100 particles was studied by transmission electron microscopy. According to selected area electron diffraction, sodium beta-alumina (NaAl(11)O(17)) is the dominant aluminium oxide and cryolite (Na(3)AlF(6)) the only sodium aluminium fluoride present. Implications of our findings for assessment of adverse health effects are discussed.